Jeep Wagoneer Differential Replacement

Dana 30/44 Reverse Dana 44~Dana 44; Standard Rotation~Outer slinger

Dana 25/27/30/44/50 Dana 44~Dana 44; Standard Rotation~Inner slinger

Dana 60/70/70U/70HD Dana 60~Outer slinger; 2.250 in. O.D.

Dana 30; Standard Rotation

Dana 60 Reverse Dana 60~Inner slinger; 4.496 in. O.D.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 60; Bulkhead Quick-Disconnect Fitting

; Wiper Kit Retaining Bolt Front Knuckle Oil Wiper Kit Retaining Bolt

Dana 27/30/44; Small; w/8 Retaining Bolts Dana 27/30/44; Small; w/8 Retaining Bolts

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 60

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

Dana 30 Reverse; 27 Spline; 3.73 And Up Dana 30; Standard Rotation; 27 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; 27 Spline; 3.73 And Up Ratio

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up Dana 44; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

29 Spline; 1.27 in. Axle Shaft Diameter; 3.08 And Up Ring Gear Pinion Ratio; Rear AMC 20

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Applies To Disconnect Only; Dana 30/Reverse; 7.2 in.

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

27 Spline; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio;Rear ; Dana 30/Reverse; Applies To Non-Disconnect Only

30 Spline; 3.73 And Up Dana 30; Standard Rotation; 30 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.73 And Up Ratio; Requires 30 Spline Axles

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35; 7.56 in. Ring Gear Dia.

Dana 60; 30 Spline; 4.56 And Up~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.56 and Up Ratio

Dana 60; 35 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60 Rear; 35 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 30 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.56 And Up~Yukon Dura Grip Positraction; Dana 60; 35 spline; 4.56 and Up; 4 Pinion Design; w/o C-clips

35 Spline; 4.10 And Down Dana 60; 35 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

30 Spline; 4.10 And Down Dana 60; 30 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 4.56 And Up Dana 60; 30 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.56 And Up; w/ Full Float Axle

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Dana 60/Reverse; 35 Spline; 4.56 And Up Dana 60; 35 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.56 And Up; w/ Full Float Axle

Dana 60; 40 Spline; 4.10 And Down Dana 60; 40 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline Upgrade; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

Selectable Full Locker w/Limited Slip; For Use w/3.73-Down Ratio; 30 Spline Dana 44

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

27 Spline; 1.29 in. Axle Shaft Diameter; 3.08 And Up Ring Gear Pinion Ratio; AMC 20

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

40 Spline; 4.56 And Up Dana 60; 40 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline; 4.56 And Up; w/ Full Float Axle

Dana 30; 30 Spline; 3.73 Ratio And Up Dana 30; Standard Rotation; 30 Spline; 3.73 Ratio And Up

Selectable Full Locker w/Limited Slip; For Use w/3.31-Down Ratio; 27 Spline Dana 35

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: 3.73 and down Confirm axle is not AMC M20

Axle: Model 20 Shaft: 1.25" Spline: 29 Ratio: 3.08 and up

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.54 and down

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.73 and up

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: 3.92 and up Confirm axle is not AMC M20

Axle: Model 20 Shaft: 1.25" Spline: 29 Ratio: 2.73 and down

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; 30 Spline; 3.92 Ratio And Up

30 Spline; 3.73 Ratio And Down Dana 44; 30 Spline; 3.73 Ratio And Down

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 30; 27 Spline; 3.73 Ratio And Up Dana 30; Standard Rotation; 27 Spline; 3.73 Ratio And Up

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Competition Only; 35 Spline Axles; 4.10 And Down Dana 60; Competition Only; 35 Spline Axles; 4.10 And Down

Competition Only; 35 Spline Axles; 4.56 And Up Dana 60; Competition Only; 35 Spline Axles; 4.56 And Up

Selectable Full Locker w/Limited Slip; For Use w/3.92-Up Ratio; 30 Spline Dana 44

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

30 Spline; 4.56 Ratio And Up Dana 60; 30 Spline; 4.56 Ratio And Up

30 Spline; 4.10 Ratio And Down Dana 60; 30 Spline; 4.10 Ratio And Down

35 Spline; 4.56 Ratio And Up Dana 60; 35 Spline; 4.56 Ratio And Up

Dana 60/Reverse; 35 Spline; 4.10 Ratio And Down Dana 60; 35 Spline; 4.10 Ratio And Down

Selectable Full Locker w/Limited Slip; For Use w/3.73-Up Ratio; 27 Spline Dana 30

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 30 Spline Dana 35

Selectable Full Locker w/Limited Slip; For Use w/3.55-Down Ratio; 27 Spline Dana 30

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Selectable Full Locker w/Limited Slip; For Use w/3.07-Up Ratio; 29 Spline AMC 20

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Selectable Full Locker w/Limited Slip; For Use w/2.73-Down Ratio; 29 Spline AMC 20

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 27 Spline Dana 35