Jeep Wagoneer Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

Dana 30 Reverse; Left Hand Thread Dana 30; Standard Rotation; Power Lok Case Bolt; Left Hand Thread~Dana 44; Power Lok Case Bolt; Left Hand Thread

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Rear; Incl. All Bearings/Shims/Seal/Sleeve/Sealant; For Use w/Dana 35

Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall

Dana 30/Reverse; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall Dana 30; Standard Rotation; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall

For Use w/Dana Spicer 30 Dana 30; Standard Rotation

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

Dana 30/Reverse; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket Dana 30; Bare Standard Open Carrier Case; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket~Dana 30; Standard Rotation; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket

Except without Spider Gears with Dana Model 44 Axle without Limited Slip Differential

For Use w/Dana Spicer 60 Dana 60

Case Split 3.73 And Down with Dana Model 44 Axle with Open Differential

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Standard; Open; 4.10 And Down Carrier Break

Dana 60

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

Case Split 3.54 And Down with Dana Model 30 Axle with Open Differential

For Dana 44; Loaded Case; Open; 30 Spline; 1.31" Spline Diameter

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

with Spider Gears Replaces OE Part Number(s) 83505431 with Dana Model 44 Axle with Limited Slip Differential

with 3.92 or Higher Rear Axle Ratio with Dana 44 Axle with Trac Lok

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle