Jeep Wagoneer Drive Axle Shaft Replacement

with Non ABS with OE Version 1.188in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

It fits vehicles with the 5.7L engine, 4-wheel drive, and an 8-speed automatic transmission. This part fits both the left and right sides.

Condition: Excellent (A)
Mileage: 85,000 miles

w/Cardan U-Joint

with Dana 35 Axle

with Dana 35 Axle

For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring

with Dana 30 Axle with Non ABS

Dana 44 Axle Does Include Bearing, Seal, or Hardware

For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

Flanged; 27.75 in. Length; For Use w/AMC 20

with Dana 44 Axle with Dana 44 Axle(s)

Dana 35 Axle Does Include Bearing, Seal, or Hardware

Flanged; 29.25 in. Length; For Use w/AMC 20

with 22.68in Shaft Length with Dana 30 Axle with Non ABS

AMC 20; Dana 44; 30 Spline; 15.80 in. Length Dana 44; Standard Rotation; 30 Spline; 15.80 in. Length

Dana Model 44 Axle

Dana 44 Axle Does Include Bearing, Seal, or Hardware

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 32.95in Axle

Dana 44; AMC 20; 30 Spline; 14.78 in. Length Dana 44; Standard Rotation; 30 Spline; 14.78 in. Length

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 32.12in Axle

Dana 35 Axle Does Include Bearing, Seal, or Hardware

w/Cardan U-Joint

Dana 44; AMC 20; 30 Spline; 14.61 in. Length Dana 44; Standard Rotation; 30 Spline; 14.61 in. Length

Dana 44; AMC 20; 30 Spline; 33.19 in. Length Dana 44; Standard Rotation; 30 Spline; 33.19 in. Length

Dana 44; 30 Spline; 35.25 in. Length; Replacement Dana 44; Standard Rotation; 30 Spline; 35.25 in. Length; 4340 Chromoly Upgrade~Dana 44; Standard Rotation; 30 Spline; 35.25 in. Length; Replacement

AMC 20; Dana 44; 30 Spline; 32.12 in. Length Dana 44; Standard Rotation; 30 Spline; 32.12 in. Length

Dana Model 44 Axle

with 38.51in Shaft Length with Dana 30 Axle with Non ABS

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 14.78in Axle with 30 Spline Teeth

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 15.80in Axle with 30 Spline Teeth

with Non ABS Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Axle

Exc.Disconnecting Axle, w/Cardan U-Joint

It is for vehicles with the 5.7L engine, 4-wheel drive, and an automatic transmission. This part fits 4-door models. It is designed to work on both the left and right sides.

Condition: Excellent (A)
Mileage: 82,300 miles

with 2 Snap Ring Grooves at Shaft End with 9.72in Shaft Length with Dana 44 Front Axle

It is a rear CV axle shaft.

Condition: Excellent (A)
Mileage: 27,000 miles

Condition: Excellent (A)
Mileage: 23,000 miles

Condition: Excellent (A)
Mileage: 27,000 miles

This is a rear CV axle shaft.

Condition: Excellent (A)
Mileage: 34,000 miles

Requires 5-760X with 9.94in Shaft Length with Dana 44 & GM 8.5 Axles

1.062in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

Condition: Excellent (A)
Mileage: 2,000 miles

Condition: Excellent (A)
Mileage: 2,000 miles

Requires 5-760X with 9.72in Shaft Length

Condition: Excellent (A)
Mileage: 2,000 miles

Condition: Excellent (A)
Mileage: 1,000 miles