Jeep Wrangler Differential Replacement

Dana 25/27/30/44/50 Dana 30; Reverse Rotation~Inner slinger

Dana 30/44 Reverse Dana 30; Reverse Rotation~Outer slinger

Dana 30; Reverse Rotation

9 in./7.5in./8.8 in. 10 Bolt Dana 44

Dana 44/Reverse/30 Dana 30~Dana 44; Non-Rubicon JK~Outer oil slinger

Dana 44/Reverse/30 Dana 30~Dana 44; JK Rubicon~Dana 44; Non-Rubicon JK~Dana 44; Reverse Rotation~Inner oil slinger

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting AMC Model 35; Bulkhead Quick-Disconnect Fitting~Dana 30; Reverse Rotation; Bulkhead Quick-Disconnect Fitting

Standard; For Use w/3.55/3.73/4.11 Ratio; w/0.81 Bolt Length; For Use w/Dana 35

Case Only; For Use w/Dana 30

It is a Spicer brand part.

Condition: Excellent (A)

Includes Differential Bearings and Ring Gear Bolts; For Use w/Dana 30

Incl. Inner Components And Pressure Plate; For Use w/Dana 30 w/ 3.73 And 4.10 Ratio

w/o Gear Set

Standard; For Use w/3.07 Ratio; w/0.81 in. Bolt Length; For Use w/Dana 35

For Use w/3.07 Ratio; w/0.81 in. Bolt Length; For Use w/AMC 20

Gear Ratios- 3.73/4.10/4.56; Incl. Gear Set; For Use w/Dana 30

Gear Ratios- 3.55/4.11/4.56; Incl. Gear Set; For Use w/Dana 35

Includes Differential Case/Differential Bearings/ And Ring Gear Bolts Dana 35 Rear Axle w/ .81 in. Long Bolts

For Use w/Trac Lok; For Use w/Dana 44

Incl. Gear Set; For Use w/Trac Lok; For Use w/Dana 35

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35

No Retrn High Quality;Does not work with Dana 70/80 or Ford 9.75 in. pinions Depth Setting

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

Rear Ratios- 3.55/4.11/4.56; Incl. Gear Set; For Use w/Dana 35

30 Spline; 3.92 And Up; Rear Dana 44 For Use/Non-Thick Ring Gears Only

Dana 30 Reverse; 27 Spline; 3.73 And Up Dana 30; 27 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; 27 Spline; 3.73 And Up Ratio

27 Spline; 3.54 And Up Yukon Dura Grip Positraction; Model 35 / Dana 35 Rear; 27 Spline; 3.54 And Up Ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

32 Spline; 1.41 in. Axle Shaft Diameter; 8.3 in./8.7 in. Ring Gear Diameter; All Ratios; Dana 44 M210/M220 The Stator Must Be Removed For Clearance Prior To Installing Ring Gear~Must Be Reinstalled In Order [1]Ring Gear; [2]Stator; [3]Bearing~Factory 3.73 Gear Req. Replacement M220 Jeep JL Ring and Pinion

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up Dana 44; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

For Use w/Dana 44

Incl. Gear Set; For Use w/Dana 35

Incl. Gear Set; For Use w/Dana 35; 3.55/3.73/4.10/4.56/4.88 Gear Ratio

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

29 Spline; 1.21 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.375 in.

Gear Ratio- 3.07; Incl. Gear Set; For Use w/Dana 35

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Applies To Disconnect Only; Dana 30/Reverse; 7.2 in.

27 Spline; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio;Rear ; Dana 30/Reverse; Applies To Non-Disconnect Only

30 Spline; 3.73 And Up Dana 30; 30 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.73 And Up Ratio; Requires 30 Spline Axles

Incl. Differential Case w/Gear Set; Bearing Set; Shim Set; Ring Gear Bolts and Cover Gasket; For Use w/Dana 44

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35; 7.56 in. Ring Gear Dia.

30 Splne;1.15 in. Axl Shft Dia;3.54 And Up Rng Gr Pin Ratio;Dana Spr 35;BeargPN[LM102949];RacePN[LM102911];Uniq. ShimsReqdForCertnApps; Rear Dana 35 Bearing LM102949 and Race LM102911 And Unique Shims Required

30 Spline Dana 44. JK Non-Rubicon; Yukon Grizzly Locker; 30 Spline; 1/2 in. Bolt holes~Dana 44; Non-Rubicon JK; 30 Spline

AMC 35; 27 Spline; 3.54 And Up AMC Model 35; 27 Spline; 3.54 And Up~Model 35; Yukon Grizzly Locker; 27 Spline; 3.54 And Up

30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

30 Spline AMC Model 35; 30 Spline~Model 35; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.54 And Up; Requeires 30 Spline Axles

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Incl. Gear Set

Selectable Full Locker w/Limited Slip; For Use w/3.73-Down Ratio; 30 Spline Dana 44

Axle: DANA 44 Shaft: 33.3 (1.31") Spline: 35 Ratio: 3.92 and up

Axle: RUBICON Spline: 35 Ratio: All

Rear Trac-Lok; For Use w/Dana 44

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

Gear Ratios- 3.07/3.55; Incl. Gear Set; For Use w/Dana 30

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

30 Spline; 3.54 Ratio And Up AMC Model 35; 30 Spline; 3.54 Ratio And Up

Dana 30; 30 Spline; 3.73 Ratio And Up Dana 30; 30 Spline; 3.73 Ratio And Up

Dana 44; 30 Spline

Selectable Full Locker w/Limited Slip; For Use w/3.31-Down Ratio; 27 Spline Dana 35

TracLok; Incl. Gear Set

Incl. Gear Set; For Use w/Locking Differential; For Use w/Dana 44

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: All Not Rubicon. Confirm axle is not D35

Axle: DANA 35 C-CLIP Shaft: 33.3 (1.31") Spline: 30 Ratio: 3.54 and up

Axle: M220 Spline: 32 Ratio: All

Axle: D35 Shaft: 1.16" Spline: 27 Ratio: 3.54 and up Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.73 and up

Axle: Dana M200 Shaft: 1.25" Spline: 29 Ratio: All Confirm axle is not M220

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.54 and down

Axle: DANA 44 Shaft: 33.3 (1.31") Spline: 33 Ratio: 3.92 and up

Axle: DANA 30 Shaft: 29.5 (1.16") Spline: 30 Ratio: 3.73 and up

Axle: DANA 44, Shaft: 38.1 (1.50 in), Spline: 35, Ratio: All, RUBICON ONLY

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: 3.92 and up Not Rubicon. Confirm axle is not D35. Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts

Axle: D35 Shaft: 1.16" Spline: 27 Ratio: 3.31 and down Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts

Axle: DANA 44 Shaft: 33.3 (1.31") Spline: 35 Ratio: 3.73 and down

29 Spline; 1.21 in. Axle Shaft Diameter; Rear 8.375 in.; 2.73 And Up Ring Gear Pinion Ratio

30 Spline; 3.73 Ratio And Down Dana 44; 30 Spline; 3.73 Ratio And Down

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; 30 Spline; 3.92 Ratio And Up

Dana 44 Reverse; 30 Spline; 3.73 Ratio And Down Dana 44; Non-Rubicon JK; 30 Spline; 3.73 Ratio And Down

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 30; 27 Spline; 3.73 Ratio And Up Dana 30; 27 Spline; 3.73 Ratio And Up

27 Spline; 3.54 Ratio And Up AMC Model 35~AMC Model 35; 27 spline axles

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; 7.2 in.

Selectable Full Locker w/Limited Slip; For Use w/3.92-Up Ratio; 30 Spline Dana 44

TracLok; Incl. Gear Set And Plates

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

w/ 1/2 in. Gear Bolts; For Use w/Dana 44 w/Tru-Lok Differential

TracLok; Incl. Gear Set; For Use w/Dana 35

Dana 44; 8.3/8.7 in. Ring Gear Dia.; 1.41 in. Shaft Diameter; 32 Spline; All Ratios

Dana 35; 29 Spline; 1.25 in. Axle Shaft Diameter; All Ratios; 7.9 in.

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.73-Up Ratio; 27 Spline Dana 30

Dana 44 M220 [JL/JT]; 35 Spline; All Ratios

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 30 Spline Dana 35

Selectable Full Locker w/Limited Slip; For Use w/3.55-Down Ratio; 27 Spline Dana 30

27 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; 19821-020 Bearing LM102949 And Racing LM102911 Are Required

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 35 Spline Dana 44

30 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Rear 7.56 in. 19822-020 Bearing And LM102911 Race Are Required

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

30 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Dana 30 Bearing LM102949 and Race LM102911 And Outboard Shims Required

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 27 Spline Dana 35

Incl. Differential Case Assembly w/ Axle Locker Actuator; Differential Bearings and Ring Gear Bolts; For Use w/Dana 44

For Use w/3.07 Ratio; Incl. Gear Set; For Use w/Dana 35 w/Trac-Lok

Front; w/5.38 Gear Ratio And Upgraded 35 Spline Axles; 8-Lug; w/Eaton Elocker

Front; w/5.38 Gear Ratio; 8-Lug; w/ARB Air Locker

Front; w/4.88 Gear Ratio; 8-Lug; w/ARB Air Locker

Front; w/4.88 Gear Ratio And Upgrade 35 Spline Axles; 8-Lug; w/Eaton Elocker

Front; w/4.88 Gear Ratio; 8-Lug; w/ARB Air Locker

Front; w/5.38 Gear Ratio And Upgrade 35 Spline Axles; 8-Lug; w/Eaton Elocker

Front; w/5.38 Gear Ratio; 8-Lug; w/ARB Air Locker