Jeep Wrangler Differential Carrier Replacement

Dana 30 Reverse; Left Hand Thread Dana 30; Reverse Rotation; Power Lok Case Bolt; Left Hand Thread

For Dana 30; 3.73 and Higher; Empty Case; Open; Use With Internal Kit 2002914

Case Split 3.73 And Up with Dana Model 30 Axle with Unloaded

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Dana 30; Reverse; w/Gasket/Shims/Ring Bolts; 2.75 To 3.54 Ratio

Dana 30; Reverse; 3.73 To 5.38 Ratio

Rear; Incl. All Bearings/Shims/Seal/Sleeve/Sealant; For Use w/Dana 35

Case Split 3.54 And Down Except without Spider Gears with Dana Model 30 Axle

For Dana 30; 3.73 and Higher; Empty Case; Open; Requires Use Of Included Flat Style Side Gear Thrust Washers

One Bearing; Model 35 Reverse IFS; No Return AMC Model 35

Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall

Dana 30/Reverse; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall Dana 30; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall

Case Split 3.73 And Up Except without Spider Gears with Dana Model 30 Axle

D30; bare case without internal gears; fits 3.73 and up gear ratios~Dana 30 JK Front. Bare Std. Open Carrier Case without Internal Gears. Fits 3.73 and up gear ratios

For Use w/Dana Spicer 30 Dana 30

Works w/Most Differentials AMC Model 35; Carrier shim driver kit

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 35; 3.07 Ratio; Incl. Bolts

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

Dana 35;2.73 To 3.31 Ratio; OE Style

Dana 30/Reverse; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket Dana 30; Bare Standard Open Carrier Case; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket~Dana 30; Reverse Rotation; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket

Dana 35; 3.55 To 4.56 Ratio

with 3.56 or Higher Rear Axle Ratio with Dana Super 30 Front Axle Bolts Not Included Except without Differential Bearings Standard Open Design

without Limited Slip Differential Case Split 3.73 And Down Except without Spider Gears with Dana Model 30 Axle

Case Split 3.73 And Down with Dana Model 44 Axle with Open Differential

AMC Model 35; Standard Open Bare Case; 1.560 in. Side Gear Bore; 3.31 And Down Carrier Break; Not For 3.27 Carrier Break~AMC Model 35; Standard Open Bare Case; 1.560 in. Side Gear Bore; 3.31 And Down Carrier Break; Not For 3.27 Ratio

Standard Bare Case; For Use w/Dana 30

AMC 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall AMC Model 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall~Model 35; Bare Standard Open Carrier Case; 3.55 And Up Carrier Break (also 3.27 Ratio); 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall Deck Height

Case Split 3.54 And Up with Dana 35 Axle

Incl. Case/Gear Set And Bearings; w/1/2 in. Ring Gear Bolts; For Use w/Dana 44

with Spider Gears without Limited Slip Differential Case Split 3.54 And Up Replaces OE Part Number(s) 05072976AA with Dana 35 Axle

with Trac-Lok Replaces OE Part Number(s) 6840115AB with Dana 44 AdvanTek M220

Case Split 3.54 And Down with Dana Model 30 Axle with Open Differential

For Dana 44; Loaded Case; Open; 30 Spline; 1.31" Spline Diameter

Dana 35;3.07 Ratio; Incl. Bolts/Bearings/Shims;

Dana 35; 3.55 To 4.56 Ratio; Incl. Bolts/Bearings/Shims;

w/Trac-Loc; For Use w/Dana 35

without Limited Slip Differential Case Split 3.73 And Up with Dana Model 30 Axle with Spider Gears

TracLoc; 3.54 And Up Carrier Break;1 5/8 in. Tall AMC Model 35; TracLoc; 3.54 And Up Carrier Break;1 5/8 in. Tall

with Spider Gears without Limited Slip Differential Case Split 3.54 And Up Replaces OE Part Number(s) 04740834 with Dana 35 Axle

AMC 35; Standard; Loaded; Incl. Bearings/Shims; 3.54 And Up/3.27 Carrier Break; 1 5/8 in. Tall AMC Model 35; Standard; Loaded; Incl. Bearings/Shims; 3.54 And Up/3.27 Carrier Break; 1 5/8 in. Tall

with Spider Gear Case Split 3.54 And Up with Dana Super 35 Axle with Limited Slip Differential

Dana 30/44; w/Internal Spider Gears; Incl. Differential Bearings/Ring Gear Bolts

with Spider Gears Replaces OE Part Number(s) 83505431 with Dana Model 44 Axle with Limited Slip Differential

AMC 35; Standard; Loaded; 3.31 And Down Carrier Break; Not For 3.27 Carrier Break AMC Model 35; Standard; Loaded; 3.31 And Down Carrier Break; Not For 3.27 Carrier Break~Model 35; Standard Open Loaded Carrier Case; with Internal Gears; 27 Spline; 3.31 And Down Carrier Break; Not For 3.27 Carrier Ratio

Dana 35; 3.07 Ratio

with 3.31 Gear Ratio and Down - Loaded with Dana 35 Axle with Open Differential

AMC 35; Standard; Loaded; 3.54 And Up/3.27 Carrier Break AMC Model 35; Standard; Loaded; 3.54 And Up/3.27 Carrier Break

with 3.92 or Higher Rear Axle Ratio with Dana 44 Axle with Trac Lok

Dana 44;Incl. Diffrntl Carrier Case;Internal Gear St;Differential Carrier Bearing St w/Bearing Cone; Bearing Races; 10 1/2 in. Ring Gear Blts

with Spider Gear Case Split 3.31 And Down with Dana 35 Axle with Open Differential

with Spider Gear Case Split 3.54 And Up with Dana Super 35 Axle with Open Differential

with Chrysler 8.25 Axle with Spider Gears Case Split 2.56 And Up Replaces OE Part Number(s) 52068451, 52068451AB with 27 Splines with Trac Lok Limited SLip Differential

with Dana Model Super 44 Axle with Open Differential

with Spider Gears Case Split 3.73 And Down with Dana Model 44 Axle with Limited Slip Differential

Case Split 3.73 And Down with Dana Model 44 Axle with Trac Loc

Dana 35; w/Trac-Lok; 3.55 Ratio; Incl. Bolts/Bearings/Shims;

without Limited Slip Differential Case Split 3.55 And Down with Dana Model 30 Axle with Spider Gears

Dana 35; 3.07 Ratio; w/Trac Loc

with Spider Gears without Limited Slip Differential Case Split 3.73 And Down Replaces OE Part Number(s) 5252590 with Dana Model 30 Axle

with Spider Gear Case Split 3.31 And Down with Dana 35 Axle with Limited Slip Differential

Dana 44 and M220; 32 Spline

Dana 44; w-Trac Lok

with Dana 35 Axle with Spider Gears with Trac-Lok Differential

Front; Dana 44; Trak-Lok; w/7/16 Ring Bolt

with 3.54 Gear Ratio and Up - Loaded with Dana 35 Axle with Trac-Lok

with Spider Gears with Dana Model Super 44 Axle with Dana Superr 44/226 Axle with Electric Locking Differential

Case Split 4.56 And Up with 35 Splines with E-Locker with Ultimate Dana 60 Axle

Dana 44; Tru-Loc

with Ultimate Dana 44 Axle

with Limited Slip Differential with Spider Gear Case Split 3.31 And Down Replaces OE Part Number(s) 5252512 with Dana 35 Axle