Jeep Wrangler Differential Ring and Pinion Replacement

Rear; Dana 35; 10 Cover Bolts; 8 Ring Gear Bolts; 27 Axle Spline; 26 Pinion Spline; Standard Rotation Will Work w/Detroit Locker And TruTrac Only

Chrysler 9.25 in.; 10 Cover Bolts; 10 Ring Gear Bolts; 27 Axle Spline; 27 Pinion Spline; Standard Rotation

Front; Dana 35 IFS; 10 Cover Bolts; 8 Ring Gear Bolts; 27 Axle Spline; 26 Pinion Spline; Reverse Rotation; Non CV Applications

Front; Dana 30; 10 Cover Bolts; 10 Ring Gear Bolts; 27 Axle Spline; 26 Pinion Spline; Standard Rotation Dana 30 Short Pinion Standard Rotation Applicators [Crush Sleeve] Only~Will Work w/Detroit Locker And TruTrac Only

Front; Dana 30; 10 Cover Bolts; 10 Ring Gear Bolts; 27 Axle Spline; 26 Pinion Spline; Reverse Rotation Will Work w/Detroit Locker And TruTrac Only~Dana 30 Long Reverse Rotation Pinion Applications[Non-Crush Sleeve] Only

Front; Dana 30/MM186 JL; 12 Cover Bolts; 10 Ring Gear Bolts; 24 Axle Spline; 26 Pinion Spline; Reverse Rotation

Dana 30 JK; 10 Cover Bolts; 10 Ring Gear Bolts; 27 Axle Spline; 24 Pinion Spline; Reverse Rotation

Front/Rear; Dana 44; 10 Cover Bolts; 10 Ring Gear Bolts; 30 Axle Spline; 26 Pinion Spline; Standard Rotation

with 4.56 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

with 4.27 Gear Ratio with Dana Model 44 Axle

with 4.56 Gear Ratio with Dana 30 Axle

with 4.10 Gear Ratio with Dana 30 Axle

with 3.73 Gear Ratio with Dana 30 Axle

with 4.10 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

Front; Dana 30 Reverse; 4.56 Ratio

with 5.38 Gear Ratio with Dana 44 Reverse Rotation Axle

with 4.88 Gear Ratio with Dana 44 Reverse Rotation Axle

with 4.56 Gear Ratio with Ultimate Dana 44 Axle

with 226M Axle with 5.38 Gear Ratio with Dana Model Super 44 Axle

Dana 30 Axle w/4.88 Axle Ratio

with 4.56 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.13 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 4.56 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Standard Gear

with 3.54 Gear Ratio with Dana 44 Axle

Dana 30; 5.13 Ratio

Front/ Dana 60; 10 Cover Bolts; 12 Ring Gear Bolts; 35 Axle Spline; 29 Pinion Spline; Both Rotation

with 5.13 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.38 Gear Ratio with Dana Model 44 Axle

Rear; Dana 44; 10 Cover Bolts; 10 Ring Gear Bolts; 30 Axle Spline; 24 Pinion Spline; Standard Rotation

with 4.56 Gear Ratio with Dana 35 Axle

For Dana 30 Reverse; 4.10 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; High Pinion

For Dana 30 TJ; 3.73 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; Low Pinion

For Dana 30; 4.56 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; High Pinion

For Dana 30; 4.56 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; Low Pinion

For Dana 30; 4.10 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; Low Pinion

Dana 44; 5.13 Ratio

For Dana 30; 4.11 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier

For Dana 30; 4.56 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier

For Dana 30; 5.13 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier

For Dana 30; 4.88 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier

For Dana 44; 5.13 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 3.07 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

For Dana 35; 4.11 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 35; 4.56 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 35; 3.73 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.56 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 35; 4.88 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 5.89 Gear Ratio with Dana Model 44 Axle

For Dana 44; 4.27 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.07 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier

For Dana 44; For JK; 4.88 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 7/16" and 1/2" Ring Gear Bolts

For Dana 44; For JK; 5.13 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 7/16" and 1/2" Ring Gear Bolts

For Dana 44; For JK; 4.11 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 7/16" and 1/2" Ring Gear Bolts

For Dana 44; For JK; 4.56 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 7/16" and 1/2" Ring Gear Bolts

For Dana 35; 3.55 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 30; 4.88 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; High Pinion

For Dana 44; 3.92 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 3.55 Gear Ratio with Dana 35 Rear Axle

Front; Dana 35 IFS; 10 Cover Bolts; 8 Ring Gear Bolts; 24 Axle Spline; 26 Pinion Spline; Reverse Rotation; CV Applications

For Dana 44; 4.88 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 3.73 Gear Ratio with Dana 35 Axle

Dana 30 Axle w/4.10 Axle Ratio

For Dana 44; For JK; 5.38 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 7/16" and 1/2" Ring Gear Bolts

For Dana 44; 4.09 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 5.38 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 4.88 Gear Ratio with Dana 35 Axle

For Dana 44; For JK; 5.38 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier

with 4.88 Gear Ratio with Dana 30 Short Reverse Pinion Axle

For Dana 44; 4.56 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 35 Axle w/4.11 Axle Ratio

JL Dana 35; 4.56 Ratio; OE

with 5.13 Gear Ratio with Dana 30 Short Reverse Pinion Axle

Dana 35 Axle w/4.88 Axle Ratio

with 4.88 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

JL Dana 44; Front; 3.73 Ratio; OE

with 3.55 Gear Ratio with Dana 30 Axle

For Dana 44; For JK; 5.13 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier

For Dana 44; For JK; 4.56 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier

For Dana 44; For JK; 4.88 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier

Dana 30 Axle w/4.56 Axle Ratio

with 4.88 Gear Ratio with Dana Model 44 Axle

with 3.45 Gear Ratio with Dana 30 Axle

with 4.88 Gear Ratio with Dana 30 Axle

with 226M Axle with 4.56 Gear Ratio with Dana Super 44 Axle

with 226M Axle with 4.88 Gear Ratio with Dana Model Super 44 Axle

For Dana 44; 5.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44 Axle w/4.09 Axle Ratio

Dana 30 Axle w/4.56 Axle Ratio

Dana 30 Axle w/4.11 Axle Ratio

For Dana 44; 5.38 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44 Axle w/4.11 Axle Ratio

with 4.88 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 3.92 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 226M Axle with 3.73 Gear Ratio with Dana Model Super 44 Axle

Dana 35 Axle w/3.73 Axle Ratio

with 226M Axle with 5.13 Gear Ratio with Dana Model Super 44 Axle

with 5.13 Gear Ratio with Ultimate Dana 44 Axle

For Dana 44; 3.54 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

4.11 Ratio; AMC Model 35 AMC Model 35; 4.11 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; Fits 3.54 & Up Carrier

Rear; Dana 44/M220; 12 Cover Bolts; 10 Ring Gear Bolts; 32 Axle Spline; 28 Pinion Spline; Standard Rotation

4.56 Ratio; Unpainted; For Use w/Dana 35

Dana 44 Axle w/4.56 Axle Ratio

Dana 30 / M186; Reverse Rotation; Short Pinion; 4.11 Ratio

Dana 30 / M186; Reverse Rotation; Short Pinion; 4.88 Ratio

Dana 30 Short Pinion; Crush Sleeve Design; 5.13 Ratio Dana 30 Front; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; Short TJ Pinion Design;~Dana 30; Crush Sleeve Design; Crush Sleeve Design; 5.13 Ratio

Dana 44 Axle w/4.88 Axle Ratio

For Dana 30; 4.88 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; Low Pinion

For Dana 44 JL; 4.88 Ratio; Manual Transmission or Automatic Transmission with LSD Differentials

with 4.56 Gear Ratio with Dana 30 Short Reverse Pinion Axle

with 226M Axle with 5.13 Gear Ratio with Dana Model Super 44 Axle

Dana 30; Short Reverse Pinion; 5.13 Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 5.13 Gear Ratio~Dana 30; Short Reverse Pinion; 5.13 Ratio

Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 4.11 Gear Ratio~Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio

Dana 30; High Performance Replacement; Short Reverse Pinion; 4.56 Gear Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 4.56 Gear Ratio~Dana 30; High Performance Replacement; Short Reverse Pinion; 4.56 Gear Ratio

Dana 30 / M186; Reverse Rotation; Short Pinion; 3.73 Ratio

Dana 30 / M186; Reverse Rotation; Short Pinion; 5.13 Ratio

Dana 30; Short Pinion; 4.56 Ratio Dana 30 Front; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; Short TJ Pinion Design;~Dana 30; Crush Sleeve Design; Short Pinion; 4.56 Ratio

4.11 Ratio; Incl. Ring And Pinion

For Dana 44 JL; 4.88 Ratio

Dana 35 / M200; JL Rear; Ring and Pinion Set; 3.54 Ratio; 24 Spline Pinion

Dana 35 / M200; JL Rear; Ring and Pinion Set; 4.88 Ratio; 24 Spline Pinion

Dana 35 / M200; JL Rear; Ring and Pinion Set; 4.56 Ratio; 24 Spline Pinion

Dana 35 / M200; JL Rear; Ring and Pinion Set; 5.13 Ratio; 24 Spline Pinion

with 4.88 Gear Ratio with Dana 44 Axle

3.21 Ratio; 1/2 in. Ring Gear Bolts; For Use w/Dana 44

with 4.88 Gear Ratio with Dana M200 Rear Axle

Dana 35 / M200; JL Rear; Ring and Pinion Set; 3.73 Ratio; 24 Spline Pinion

Dana 30; Short Reverse Pinion; 4.88 Ratio Dana 30; Short Reverse Pinion; 4.88 Ratio

Dana 35 / M200; JL Rear; Ring and Pinion Set; 4.11 Ratio; 24 Spline Pinion

Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44 Reverse; Short Pinion; 5.13 Ratio Dana 44; Reverse Rotation; Short Pinion; 5.13 Ratio

Dana 30; Short Pinion; 3.73 Ratio Dana 30 Front; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; Short TJ Pinion Design;~Dana 30; Crush Sleeve Design; Short Pinion; 3.73 Ratio

Dana 30; Short Pinion; 4.11 Ratio Dana 30 Front; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; Short TJ Pinion Design;~Dana 30; Crush Sleeve Design; Short Pinion; 4.11 Ratio

with 4.88 Gear Ratio with Dana 30 - Short Reverse Pinion Axle

3.55 Ratio; For Use w/Dana 35

4.88 Ratio; For Use w/Dana 35

4.56 Ratio

4.56 Ratio; For Use w/Dana 35

3.07 Ratio

with 5.38 Gear Ratio with Dana 44 AdvanTEK Axle

Dana 44 / M210. JL Front; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio; 28 Spline Pinion

Dana 44 / M210. JL Front; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio; 28 Spline Pinion

Dana 44 / M220. JL Rear; Ring and Pinion Set; 4.56 Ratio; 28 Spline Pinion

Dana 44 / M220. JL Rear; Ring and Pinion Set; 4.88 Ratio; 28 Spline Pinion

with New Replacement Part Replaces OE Part Number(s) 68544667AA with 4.10 Gear Ratio with Dana 44 AdvanTEK Axle

Dana 44 / M210. JL Front; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio; 28 Spline Pinion

Dana 44 / M220. JL Rear; Ring and Pinion Set; 4.11 Ratio; 28 Spline Pinion

Dana 44 / M220. JL Rear; Ring and Pinion Set; 5.38 Ratio; 28 Spline Pinion

Dana 44 / M210. JL Front; Reverse Rotation; Ring and Pinion Set; 5.38 Ratio; 28 Spline Pinion

For Dana 44; For JK; 4.11 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier

Dana 30; Short Pinion; 4.88 Ratio Dana 30 Front; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; Short TJ Pinion Design;~Dana 30; Crush Sleeve Design; Short Pinion; 4.88 Ratio

with 5.13 Gear Ratio with Dana 30 - Short Reverse Pinion Axle

5.38 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

Dana 30 / M186; Reverse Rotation; Short Pinion; 4.56 Ratio

with 10095821 Ring Gear with 4.10 Gear Ratio with Dana M200 Rear Axle

Dana 44 Reverse; Short Pinion; 4.88 Ratio Dana 44 JK Front; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio; 24 Spline Pinion~Dana 44; Reverse Rotation; Short Pinion; 4.88 Ratio

4.10 Ratio; For Use w/Dana 44

Dana 44 / M220. JL Rear; Ring and Pinion Set; 5.13 Ratio; 28 Spline Pinion

4.56 Ratio; w/o Ring Gear Bolts; w/o Pinion Nut

4.88 Gear Ratio; Incl. Ring And Pinion Only

with Dana 44 AdvanTEK Axle with Inventory until it is Depleted Replaces OE Part Number(s) 68400414AA with 10048088 Ring Gear with 4.10 Gear Ratio

with 226M Axle with 4.56 Gear Ratio with Dana Model Super 44 Axle

with 5.38 Gear Ratio with Dana 44 AdvanTEK Rear Axle

For Dana 44 JL; 4.56 Ratio

Dana 30 Short Reverse Pinion; 3.73 Ratio Dana 30; Short Reverse Pinion; 3.73 Ratio

3.73 Ratio; w/Low Pinion Axle; 26 Spline Pinion; Incl. Ring And Pinion

AMC Model 35; 5.13 Ratio AMC Model 35; 5.13 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; Fits 3.54 & Up Carrier

4.88 Ratio; AMC Model 35 AMC Model 35; 4.88 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; Fits 3.54 & Up Carrier

with 4.88 Gear Ratio with Dana 44 AdvanTEK Axle

For Dana 35 JL; 4.56 Ratio; Automatic Transmission With Open Differentials

with 4.88 Gear Ratio with Dana 44 AdvanTEK Rear Axle

with 226M Axle with 5.38 Gear Ratio with Dana Model Super 44 Axle

Front; Dana 44/M210; 12 Cover Bolts; 10 Ring Gear Bolts; 32 Axle Spline; 28 Pinion Spline; Standard Rotation

with 5.13 Gear Ratio with Dana 44 AdvanTEK Axle

with 4.56 Gear Ratio with Dana M200 Rear Axle

with 3.73 Gear Ratio with Ultimate Dana 60 Axle

For Dana 44 JL; 5.13 Ratio

For Dana 44 JL; 5.13 Ratio; Manual Transmission or Automatic Transmission with LSD Differentials

with 4.56 Gear Ratio with Dana 44 AdvanTEK Axle

For Dana 35 JL; 4.88 Ratio; Automatic Transmission With Open Differentials

For Dana 44; 5.89 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 5.13 Gear Ratio with Dana M200 Rear Axle

Dana 44; 4.88 Ratio Dana 44; 4.88 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

with 4.10 Gear Ratio with Ultimate Dana 60 Axle

3.73 Ratio; AMC Model 35 Rear AMC Model 35; 3.73 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; Fits 3.54 & Up Carrier

3.55 Ratio AMC Model 35; 3.55 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 3.55 Ratio; Fits 3.54 & Up Carrier

4.56 Ratio AMC Model 35; 4.56 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; Fits 3.54 & Up Carrier

3.07 Ratio AMC Model 35; 3.07 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 3.07 Ratio; Fits 3.31 & Down Carrier

4.88 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

Dana 44 Reverse; Short Pinion; 5.38 Ratio Dana 44 JK Front; Reverse Rotation; Ring and Pinion Set; 5.38 Ratio; 24 Spline Pinion~Dana 44; Reverse Rotation; Short Pinion; 5.38 Ratio

Dana 44; 3.73 Ratio Dana 44; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 30; Reverse Rotation; 5.13 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 5.13 Ratio~Dana 30; Reverse Rotation; Reverse Rotation; 5.13 Ratio

Dana 30 Reverse; 4.56 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio~Dana 30; Reverse Rotation; 4.56 Ratio

Dana 44; 3.08 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.08 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 30 Reverse; 4.88 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio~Dana 30; Reverse Rotation; 4.88 Ratio

Dana 44; 3.92 Ratio Dana 44; 3.92 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.92 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set Dana 44; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set~Dana 44; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 30 Reverse; 4.11 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio~Dana 30; Reverse Rotation; 4.11 Ratio

Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier~Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 3.54 Ratio Dana 44; 3.54 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.54 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 4.11 Ratio Dana 44; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 3.31 Ratio Dana 44; 3.31 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.31 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

with 5.38 Gear Ratio with Ultimate Dana 60 Axle

with 5.38 Gear Ratio with Ultimate Dana 60 Axle

4.10 Ratio; For Use w/Dana 44

with 226M Axle with 4.88 Gear Ratio with Dana Model Super 44 Axle

Dana 44 / M210. JL Front; Reverse Rotation; 3.73 Ratio~Dana 44 / M210. JL Front; Reverse Rotation; Ring and Pinion Set; 3.73 Ratio; 28 Spline Pinion

Dana 44; 4.88 Ratio; Thick Gear Dana 44. JK Rear; Ring and Pinion Gear Set; 4.88 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; 4.88 Ratio; Thick Gear~Dana 44; Non-Rubicon JK; 4.88 Ratio; Thick Gear

with 3.45 Gear Ratio with Dana M200 Rear Axle

For Dana 35 JL; 5.13 Ratio; Automatic Transmission With Open Differentials

For Dana 44 JL; 4.56 Ratio; Manual Transmission or Automatic Transmission with LSD Differentials

with 4.56 Gear Ratio with Dana 44 AdvanTEK Rear Axle

Dana 44; High Performance Replacement; 4.56 Gear Ratio Dana 44. JK Rear; Ring and Pinion Gear Set; 4.56 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; High Performance Replacement; 4.56 Gear Ratio~Dana 44; Non-Rubicon JK; High Performance Replacement; 4.56 Gear Ratio

Dana 44; 5.89 Ratio Dana 44; 5.89 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.89 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.13 Ratio Dana 44; 5.13 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

4.88 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

5.13 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

5.13 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

4.11 Ratio; For Use w/Dana 35

4.56 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

5.38 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

4.56 Ratio; For Use w/Dana 44 For Use w/Existing Hardware

3.55 Ratio; Unpainted; For Use w/Dana 35

3.07 Ratio; For Use w/Dana 35

Dana 44 / M210. JL Front; Reverse Rotation; Ring and Pinion Set; 5.13 Ratio; 28 Spline Pinion

Dana 44 Short Pinion Reverse Rotation 3.73 Ratio Dana 44; Reverse Rotation; Short Pinion; 3.73 Ratio

with 5.13 Gear Ratio with Dana 44 AdvanTEK Rear Axle

Dana 44; 5.38 Ratio; Thick Gear Dana 44. JK Rear; Ring and Pinion Gear Set; 5.38 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; 5.38 Ratio; Thick Gear~Dana 44; Non-Rubicon JK; 5.38 Ratio; Thick Gear

Dana 44 Reverse; 4.56 Ratio; For Use w/Short Pinion Dana 44 JK Front; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio; 24 Spline Pinion~Dana 44; Reverse Rotation; Short Pinion; 4.56 Ratio

Dana 44/M220 / M220 JL; 3.73 Ratio; 28 Spline Dana 44 / M220. JL Rear; 3.73 Ratio~Dana 44 / M220. JL Rear; Ring and Pinion Set; 3.73 Ratio; 28 Spline Pinion

with 3.73 Gear Ratio with Dana 44 AdvanTEK Axle

Dana 30 Reverse; 3.73 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 3.73 Ratio~Dana 30; Reverse Rotation; 3.73 Ratio

Dana 44; High Performance Replacement; 4.11 Gear Ratio Dana 44. JK Rear; Ring and Pinion Gear Set; 4.11 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; High Performance Replacement; 4.11 Gear Ratio~Dana 44; Non-Rubicon JK; High Performance Replacement; 4.11 Gear Ratio

Dana 44; 5.13 Ratio; Thick Gear Dana 44. JK Rear; Ring and Pinion Gear Set; 5.13 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; 5.13 Ratio; Thick Gear~Dana 44; Non-Rubicon JK; 5.13 Ratio; Thick Gear

5.13 Ratio; Thick Gear Fits Rubicon; For Use w/Dana 44 Differential 7/16 in. ring gear bolts~Dana 44; 5.13 Ratio~Dana 44; Standard Rotation; 5.13 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

4.88 Ratio; For Use w/Dana 44 Differential Dana 44; 4.88 Ratio; For Use w/Dana 44 Differential~Dana 44; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set Dana 44; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set~Dana 44; Standard Rotation; 4.56 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

4.56 Ratio; Thick Gear Fits Rubicon; For Use w/Dana 44 Differential Dana 44; 4.56 Ratio~Dana 44; Standard Rotation; 4.56 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.38 Ratio Dana 44; 5.38 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.38 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

3.07 Ratio; For Use w/Dana 44

4.88 Ratio

Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 5.13 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

4.10 Ratio; For Use w/Dana 30

Dana 44; 4.10 Ratio; w/Factory Air Locker;

with 3.73 Gear Ratio with Ultimate Dana 60 Axle

For Dana 44; 5.13 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44; 3.73 Ratio

Dana 44 Reverse; High Performance Replacement; 4.11 Gear Ratio; For Use w/Short Pinion Dana 44; Reverse Rotation; High Performance Replacement; 4.11 Gear Ratio; For Use w/Short Pinion

with 3.45 Gear Ratio with Dana 44 AdvanTEK Rear Axle

28 Spline; 3.45 Ratio; Dana 44/M220 Dana 44 / M220. JL Rear; Ring and Pinion Set; 3.45 Ratio; 28 Spline Pinion~Dana 44 / M220. JL Rear; with Anti Spin Limited Slip; 3.45 Ratio;

Dana 30; Short Pinion; 3.55 Ratio Dana 30 Front; Standard Rotation; Ring and Pinion Set; 3.55 Ratio; Short TJ Pinion Design;~Dana 30; Crush Sleeve Design; Short Pinion; 3.55 Ratio

Dana 30 Reverse; Dana 35; 4.56 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 30 Reverse; Dana 35; 4.56 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

Dana 30 Reverse; Dana 35; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 30 Reverse; Dana 35; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

Dana 44; 3.21 Ratio Dana 44. JK Rear; Ring and Pinion Gear Set; 3.21 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; 3.21 Ratio~Dana 44; Non-Rubicon JK; 3.21 Ratio

4.10 Ratio; For Use w/Dana 44

3.76 Ratio; For Use w/Dana 44

Dana 44; 3.73 Ratio Dana 44. JK Rear; Ring and Pinion Gear Set; 3.73 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; 3.73 Ratio~Dana 44; Non-Rubicon JK; 3.73 Ratio

Dana 30; Dana 44; 4.56 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 30; Dana 44; 4.56 Ratio; Re-ratio Kit; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

Dana 30; Dana 44; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 30; Dana 44; 4.88 Ratio; Re-ratio Kit; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

Dana 30 Reverse; 3.54 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 3.54 Ratio~Dana 30; Reverse Rotation; 3.54 Ratio

Dana 35; 3.55 Ratio; 3.55 Ratio; 39 x 11 Teeth; Incl. Bearings/Cups/Shims/Seals/Hardware; Superseded To PN[16514.03];

3.73 Ratio; For Use w/Dana 30

3.73 Ratio; w/ 7/16 in. Ring Gear Bolts; Incl. Ring And Pinion/Ring Gear Bolts/Pinion Washer/Pinion Nut

3.73 Ratio; For Use w/Dana 35

For Dana 44; For JK; 3.21 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; 2007 Model Carriers Need To Be Drilled For 1/2" Ring Gear Bolts

Dana 35; 3.07 Ratio; 43 x 14 Teeth; Incl. Bearings/Cups/Shims/Seals/Hardware;

with 226M Axle with 3.21 Gear Ratio with Dana Model Super 44 Axle

3.54 Ratio; For Use w/Dana 44

Dana 30; Reverse; 3.55 Ratio

3.73 Ratio; For Use w/Dana 30

Dana 44; 5.13 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; 5.13 Ratio; Re-ratio Kit; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kits

4.56 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit 4.56 Ratio; Re-ratio Kit; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kits

4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; 4.88 Ratio; Re-ratio Kit; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kits

Carrier Break 3.54/3.73 Dana 30 Axle w/3.73 Axle Ratio

3.73 Ratio; For Use w/Dana 35

Dana 30; Dana 35; 4.56 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 30; Dana 35; 4.56 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

Dana 44; Dana 35; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; Dana 35; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

Dana 35; Dana 30; 5.13 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 35; Dana 30; 5.13 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

4.11 Gear Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 30; Dana 44; 4.11 Gear Ratio; Re-ratio Kit; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

3.55 Ratio; Incl. Pinion Bearings/Cups/Pinion Nut And Washer/Oil Seal And Slinger/Ring Bolts/Shim Kit Dana 30

4.10 Ratio; For Use w/Dana 44

3.73 Ratio; Right Hand Drive; For Use w/Dana 30

Dana 30; AMC 35; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Incl. Front And Rear Ring/Pinion Sets; Master Overhaul Kit~Dana 30 Short Front; AMC 35 Rear; 4.88 Ratio; Re-ratio Kit

Dana 30; AMC 35; 4.56 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 30 Short Front; AMC 35 Rear; 4.56 Ratio; Re-ratio Kit~Incl. Front And Rear Ring/Pinion Sets; Master Overhaul Kit

with 4.88 Gear Ratio with Ultimate Dana 60 Axle

4.11 Ratio; 7/16 in. Ring Gear Bolts; For Use w/Dana 44

For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio; Fits 3.73 and Higher Carrier Front; Fits 3.54 and Higher Carrier Rear; If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier; If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier

For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio; Fits 3.73 and Higher Carrier Front; Fits 3.54 and Higher Carrier Rear; If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier; If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier

For Dana 44; For JK; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; 2007 Model Carriers Need To Be Drilled For 1/2" Ring Gear Bolts

Dana 44; 5.38 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; 5.38 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

4.56 Gear Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit 4.56 Gear Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kits

Dana 44; Dana 35; 5.13 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; Dana 35; 5.13 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

4.11 Ratio 4.11 Ratio

Dana 44; Dana 35; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit Dana 44; Dana 35; 4.88 Ratio; Incl. Front And Rear Ring And Pinion Sets; Master Overhaul Kit

For Dana 30 Front and Dana 44 Rear - Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio; Fits 3.73 and Higher Carrier Front; Fits 3.92 and Higher Carrier Rear; If Currently Using A 3.73 Ratio You Will Need To Purchase A New Rear Carrier; If Currently Using A 3.54 Or 3.07 Ratio You Will Need To Purchase A New Front and Rear Carrier

For Dana 30 Front and Dana 44 Rear - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio; Fits 3.73 and Higher Carrier Front; Fits 3.92 and Higher Carrier Rear; If Currently Using A 3.73 Ratio You Will Need To Purchase A New Rear Carrier; If Currently Using A 3.54 Or 3.07 Ratio You Will Need To Purchase A New Front and Rear Carrier

3.07 Ratio; Incl. Case; For Use w/Dana 35

3.73 Ratio; For Use w/Dana 30

3.07 Ratio; Incl. Ring And Pinion/Ring Gear Bolts/Crush Sleeve/Pinion Nut

with 226M Axle with 4.10 Gear Ratio with Dana Model Super 44 Axle

For Dana 30 JK Front and Dana 44 JK Rear - Ring and Pinions Including Timken Bearing Kits; For JK; 5.13 Ratio; Fits 3.73 and Higher Carrier; If Currently Using A 3.21 Ratio You Will Need To Purchase A New Front Carrier

For Dana 30 JK Front and Dana 44 JK Rear - Ring and Pinions Including Timken Bearing Kits; For JK; 4.56 Ratio; Fits 3.73 and Higher Carrier; If Currently Using A 3.21 Ratio You Will Need To Purchase A New Front Carrier

For Dana 30 JK Front and Dana 44 JK Rear - Ring and Pinions Including Timken Bearing Kits; For JK; 4.88 Ratio; Fits 3.73 and Higher Carrier; If Currently Using A 3.21 Ratio You Will Need To Purchase A New Front Carrier

4.10 Ratio; For Use w/Dana 30

4.10 Ratio; For Use w/Dana 30

For Dana 44; For JK; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier

with 4.56 Gear Ratio with Dana Model 44 Axle

For Dana 44 Rubicon Front and Rear - Thick Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio; 3.73 Ratio Carrier and Lower; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44 Rubicon Front and Rear - Thick Ring and Pinions Including Timken Bearing Kits; 5.13 Ratio; 3.73 Ratio Carrier and Lower; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44 Rubicon Front and Rear - Thick Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio; 3.73 Ratio Carrier and Lower; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

3.73 Ratio; Incl. Ring And Pinion/Ring Gear Bolts/Crush Sleeve/Pinion Washer/Pinion Nut

with 5.13 Gear Ratio with Dana 44 Front Axle

For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits; 4.10/4.11 Ratio; If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier; If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier

4.56 Ratio; For Use w/Dana 30

4.11 Ratio; Rear Axles w/ Or w/o Trac Loc Or Tru Lok Differential; Incl. Ring And Pinion/Ring Gear Bolts/Pinion Nut

For Dana 44 JK Rubicon Front and Rear - Ring and Pinions Including Timken Bearing Kits; For JK; 5.13 Ratio

For Dana 44 JK Rubicon Front and Rear - Ring and Pinions Including Timken Bearing Kits; For JK; 5.38 Ratio

For Dana 44 JK Rubicon Front and Rear - Ring and Pinions Including Timken Bearing Kits; For JK; 4.88 Ratio

4.11 Ratio; For Use w/Dana 30

with 5.38 Gear Ratio with Dana Model 44 Axle

For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio; If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier; If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier

4.11 Ratio; 1/2 in. Ring Gear Bolts; For Use w/Dana 44

For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio; If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier; If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier

For Dana 30 Front and Dana 35 Rear - Ring and Pinions Including Timken Bearing Kits; 4.10 Ratio; Fits 3.73 and Higher Carrier Front; Fits 3.54 and Higher Carrier Rear; If Currently Using A 3.54 Ratio You Will Need To Purchase A New Front Carrier; If Currently Using A 3.07 Ratio You Will Need to Purchase a New Front and Rear Carrier

3.55 Ratio; w/ 3/8 in. Ring Bolts; For Use w/Dana 35

4.10 Ratio; For Use w/Dana 44

For Dana 30 Front and Dana 44 Rear - Ring and Pinions Including Timken Bearing Kits; 4.10 Ratio; Fits 3.73 and Higher Carrier Front; Fits 3.92 and Higher Carrier Rear; If Currently Using A 3.73 Ratio You Will Need To Purchase A New Rear Carrier; If Currently Using A 3.54 Or 3.07 Ratio You Will Need To Purchase A New Front and Rear Carrier

3.55 Ratio; For Use w/Dana 30

3.07 Ratio; For Use w/Dana 30

For Dana 44 JK Rubicon Front and Rear - Ring and Pinions Including Timken Bearing Kits; For JK; 4.56 Ratio

4.56 Ratio; For Use w/Dana 30

3.07 Ratio; For Use w/Dana 30

For Dana 30 Front and Dana 44 JL Rear - Ring and Pinions Including Koyo Bearing Kits; For JL; 5.13 Ratio

For Dana 30 Front and Dana 44 JL Rear - Ring and Pinions Including Koyo Bearing Kits; For JL; 4.88 Ratio

3.55 Ratio; Unpainted; For Use w/Dana 30