Jeep Wrangler Drive Axle Shaft Replacement

with OE Version 1.188in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

For Use w/Disconnect Axle

Condition: Excellent (A)
Mileage: 82,400 miles

Condition: Excellent (A)
Mileage: 203,200 miles

with Dana Model 44 Axle Replaces OE Part Number(s) 4882351 with 30 Splines with Dana 44/216 Axle

Condition: Excellent (A)

30.35 in. Length; Flanged; For Use w/Dana 35

ABS Ring not Included with 29.04in Shaft Length with Dana 35 Axle

ABS Ring not Included with 30.54in Shaft Length with Dana 35 Axle

28.85 in. Length; Flanged; For Use w/Dana 35

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

Condition: Excellent (A)
Mileage: 63,000 miles

30 Spline; 29.25 in. Length; For Use w/Dana 44

with Dana 30 Axle

For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring

Dana 35 Axle Does Include Bearing, Seal, or Hardware

30.35 in. Length; For Use w/Dana 35

30 Spline; 29.75 in. Length; For Use w/Dana 44

with Dana 30 Axle

For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

Dana 35 Axle Does Include Bearing, Seal, or Hardware

28.85 in. Length; For Use w/Dana 35

For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 30.62 in. Length

For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline

For Use w/Dana 35

Dana 44;Chromoly Inner 30 Spline; Stock Length; Accepts 5-760X U-Joint; RH[Passenger Side] Machined To Accept Full Circle Clips

30.54 in. Length; For Use w/Dana 35

For Use w/Dana 35

Incl. Retainer/Bearing/Seal/Ring; For Use w/Dana 35

Incl. Bearing/Seal And Retainer; 29.04 in. Length; For Axle Shaft w/Tone Ring Order PN[5252948]; For Use w/Dana 35

Incl. Retainer/Bearing/Seal And Ring; w/Tru-Lok Differential; For Use w/Dana 44

Dana 44 (210mm); 4340 inner axle; 32 Spline; 21.3 in. Long

Condition: Excellent (A)
Mileage: 56,000 miles

Dana 30 (186mm); 4340 inner axle; 27 Spline; 19.3 in. Long

Condition: Excellent (A)

29.04 in. Length; For Use w/Dana 35

Dana 44 Axle Does Include Bearing, Seal, or Hardware

AMC 35; Dana 30; 27 Spline; 16.63 in. Length Dana 30; Reverse Rotation; 27 Spline; 16.63 in. Length

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

Dana 44 Reverse; 5-7166X U-Joint; 30 Spline; 19.8 in. Long Dana 44; Reverse Rotation; 5-7166X U-Joint; 30 Spline; 19.8 in. Long

For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline

Dana 44 Reverse; Replacement; Stud Dana 44; Reverse Rotation; 4340 Chromoly Replacement; Outer Stub Axle; 32 Spline; Fits 1350 U-Joint~Dana 44; Reverse Rotation; Replacement; Stud

Front; 32 Spline; Placer

Dana 30; 27 Spline; 18.8 in. Length Dana 30; 27 Spline; 18.8 in. Length

29.25 in. Length; For Use w/Dana 44

27 Spline; 7166 U-Joint Size Dana 30

For Use w/Axle PN[52111766AF/52104676AC] Only; For Use w/Dana 35

29.70 in. Length; For Use w/Dana 44

For Use w/Dana 44

Dana 30; 27 Spline; 15.80 in. Length Dana 30 Disconnect; Intermediate Axle; 15.80 in.; 15 spline; 297X U-Joint

For Use w/Dana 30 And Dana 30 Reverse

Condition: Excellent (A)

Condition: Excellent (A)
Mileage: 110,900 miles

Condition: Excellent (A)
Mileage: 141,400 miles

w/4 Wheel Disc Brakes; For Use w/Dana 44

Incl. Retainer/Bearing/Seal/Ring; For Use w/Dana 35

For Use w/Dana 30

with 29.04in Shaft Length with Dana 35 Axle with Non ABS

Dana 35 Axle Does Include Bearing, Seal, or Hardware

w/Tru-Lok Differential; For Use w/Dana 44

For Use w/Dana 30 And Dana 30 Reverse

18.8 in.; 30 Spline; Left Hand Side Dana 30; Aftermarket 30 spline upgrade; Uses 1350 Serier Joint

Condition: Excellent (A)
Mileage: 110,900 miles

Dana 30; AMC 35; 27 Spline; 16.57 in. Length Dana 30; Crush Sleeve Design; 27 Spline; 16.57 in. Length

It fits rear axle applications. It is for vehicles without an electronic locking differential.

Condition: Excellent (A)
Mileage: 121,000 miles

Dana 44 Axle Does Include Bearing, Seal, or Hardware

Dana 44 32 Spline Left Hand Side Dana 44. JK Rubicon; 4340 Chrome-Moly; 32 Spline Left Hand Side; 31.2 in. Long~Dana 44; JK Rubicon; 32 Spline Left Hand Side

with ABS Ring with Dana 35 Axle with 2.678in O.D. ABS Ring with 29.04in Shaft Length with 54 Teeth

For Use w/Dana 44

19.11 in.; 35 Spline Dana 44; 19.11 in. Long; Aftermarket 35 spline upgrade; Uses 1350 Serier Joint

with Dana 44 AdvanTEK Axle with E-Locker with Wide Track Axle

For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 29 in. Long

Left Rear; Dana 44; Narrow Track; w/E-Locker; 31.56 in. Long

Does Include Bearing, Seal, or Hardware w/Sales Code DSE (Tru-Lok Differential Front and Rear Axle) or w/Sales Code DSH (Locker Rear Axle)

with Axle Shaft Assembly with Axle Bearing and Seal with Dana Super 44 Rear Axle with 31.18in Length with 31.18in Shaft Length with 32 Splines With Electronic Locking Differential

34.5 in. Long; 27 Spline; 7166 U-Joint Size Dana 30

with 30 Splines with 5-7166X U-Joint(s) Aftermarket Design with 1350 Series Universal Joint - Required with 19.10in Axle with Dana 44 or Ultimate Dana 44 Axle(s) with Locking Differential

For Use w/Axle PN[52111766AF/52104676AC] Only; For Use w/Dana 35

Dana 44 Rear; 31 1/4 in. Long Dana 44. JK Rubicon; Left Rear Axle Kit; 4340 Chromoly; 31 1/4 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)~Dana 44; JK Rubicon; 31 1/4 in. Long

29.75 in. Length; For Use w/Dana 44

with 5-760X Universal Joint - Required with Dana 30 Axle Requires 5-760X U-Joint with 16.61in Axle with 27 Spline Teeth

34.5 in.; 30 Spline Right Dana 30; Aftermarket 30 spline upgrade; Uses 1350 Serier Joint; 4340 Chromoly; 07-11 applications require larger 1350 stub axles

with Ultimate Dana 60 Axle

Does Include Bearing, Seal, or Hardware w/Sales Code DSA (Anti Spin Differential Rear Axle) or w/Sales Code DS8 (Conventional Differential Rear Axle)

with 22.68in Shaft Length with Dana 30 Axle with Non ABS

Condition: Excellent (A)

with Ultimate Dana 60 Axle

For Use w/Dana 44

with 5-7166X U-Joint(s) with Dana Model Super 30 Axle with 1350 Series Universal Joint - Required with 18.80in Axle with 27 Splines

Dana 44; 30 Spline; Left Hand Inner; 1350 Joint Dana 44; Reverse Rotation; 30 Spline; Left Hand Inner; 1350 Joint

with 33.57in Length with 5-7166X U-Joint(s) with Locking Differential 1350 Series OE Design with 30 Spline Teeth with Dana 1350 Series Drive Shaft with Dana 44 or Ultimate Dana 44 Axle(s)

Dana 44; 30 Spline; Right Hand Inner; 1350 Series Joint Dana 44; Reverse Rotation; 30 Spline; Right Hand Inner; 1350 Series Joint

Replaces OE Part Number(s) 5083667AA with 216mm Axle with Dana 44 Axle

with Dana 30 Disconnect Axle

Dana 44; 32 Spline; 33.9 in. Length Dana 44 (220mm) JL Rubicon; Right Hand Axle; 4340 Chromoly; 32 Spline; 33.9 in. Long;

Dana 44; 32 Spline; 32.2 in. Length Dana 44 (220mm) JL Rubicon; Left Hand Axle; 4340 Chromoly; 32 Spline; 32.2 in. Long;

with Dana Model Super 30 Axle with 1310 Series Universal Joint - Required with 18.80in Axle with 27 Splines

Dana 44; 32 Spline; 32.2 in. Length Dana 44 (220mm) JL Non-Rubicon; Rear Axle Shaft; 4340 Chromoly; 32 Spline; 32.3 in. Long

with Dana 30 Axle Replaces OE Part Number(s) 04874307 with ABS

with 30 Splines with 5-7166X U-Joint(s) 34.19in Length Aftermarket Design with 1350 Series Universal Joint - Required with Dana 44 or Ultimate Dana 44 Axle(s) with Locking Differential

Dana Model 44 Axle

w/4 Wheel Disc Brakes; For Use w/Dana 44

with 54 Teeth with ABS Ring Replaces OE Part Number(s) 04713193 with 2.678in O.D. ABS Ring with 30.54in Shaft Length with Dana 35 Axle

Dana 44 32 Spline Right Hand Side Dana 44. JK Rubicon; 4340 Chrome-Moly; 32 Spline Right Hand Side; 32.6 in. Long~Dana 44; JK Rubicon; 32 Spline Right Hand Side

New Design with Dana Super 30 Front Axle with Upgraded 1350 Series Design

Dana 30 (186mm); 4340 inner axle; 27 Spline; 35.1 in. Long~Dana 30 (186mm); 4340 inner axle; 27 Spline; 35.1 in. Long; Front Axle Disconnect Eliminator; Replaces factory two piece inner axles and shift collar.

with Casting Number 2002422GJ on Stub Shaft with Dana 44 Front Axle

34.7 in.; 32 Spline Dana 44 (210mm); 4340 inner axle; 32 Spline; 34.6 in. Long; Front Axle Disconnect Eliminator; Replaces factory two piece inner axles and shift collar.

with Dana 44 Axle with 16.96in Axle with 30 Spline Teeth with 5-760X Universal Joint - Required

Front; 35 Spline; CORE 44; Placer

with Dana Model 44 Axle without Differential Lock

Dana 35 Axle Does Include Bearing, Seal, or Hardware

Replaces OE Part Number(s) 5103015AA with Dana 35 Rear Axle without ABS Ring

AMC 35; 27 Spline; 30 11/16 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring AMC Model 35; 27 Spline; 30 11/16 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring

Dana 44; 35 Spline; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bracket Offset Dana 44; 35 Spline; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bracket Offset~Dana 44; Aftermarket 35 Spline Axle; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bearing Offset

For Use w/Dana 30

AMC 35; 27 Spline; 29 1/4 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring AMC Model 35; 27 Spline; 29 1/4 in. Length; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring

with Dana Model 44 Axle with Differential Lock

AMC 35; 27 Spline; 29 in. Length; Bolt-In AMC Model 35; 27 Spline; 29 in. Length; Bolt-In

Replaces OE Part Number(s) 4882351 with Dana 44 Axle with Dana 44 Axle(s)

AMC 35; 27 Spline; 30 1/2 in. Length; Bolt-In AMC Model 35; 27 Spline; 30 1/2 in. Length; Bolt-In

AMC 35; Spline; 32.28 in. Length Dana 30; Reverse Rotation; 30 Spline; 32.28 in. Length

AMC 35; 30 Spline; 30 11/16 in. AMC Model 35; 30 Spline; 30 11/16 in.

Replacement Inner; 30 Spline; 31.84 in. Length; For Use w/Dana 44 Differential Dana 44

Dana 44; 30 Spline; 32 in. Long; Incl. Bearing; Seal; ABS Ring Dana 44 Rear. JK Non-Rubicon; Axle Shaft; 30 Spline; 32 in. Long; Incl. Bearing; Seal; ABS Ring~Dana 44; Non-Rubicon JK; 30 Spline; 32 in. Long; Incl. Bearing; Seal; ABS Ring

AMC 35; 27 Spline; 30 11/16 in. AMC Model 35; 27 Spline; 30 11/16 in.~Model 35; Left Rear Axle Shaft; 27 Spline; 30 11/16 in. Long; C-Clip Axle; 5 x 4.5 in. Bolt Pattern

Dana 44; 32 Spline; 31 1/4 in. Long Dana 44. JK Rubicon; Left Hand Rear Axle; 32 Spline; 31 1/4 in. Long~Dana 44; JK Rubicon; 32 Spline; 31 1/4 in. Long

Replacement Inner Axle; 30 Spline; 16.96 in. Length; For Use w/Dana 44 Differential Dana 44

Dana 44; 32 Spline; 32 5/8 in. Long Dana 44. JK Rubicon; Right Hand Rear Axle; 32 Spline; 32 5/8 in. Long~Dana 44; JK Rubicon; 32 Spline; 32 5/8 in. Long

AMC 35; 27 Spline; 29 1/4 in. AMC Model 35; 27 Spline; 29 1/4 in.~Model 35; Right Rear Axle Shaft; 27 Spline; 29 1/4 in. Long; C-Clip Axle; 5 x 4.5 in. Bolt Pattern

AMC 35; 30 Spline; 29 1/4 in. AMC Model 35; 30 Spline; 29 1/4 in.

w/o Disconnect; For Use w/Dana 30 And Dana 30 Reverse

It fits rear axle applications. It is for vehicles without an electronic locking differential.

Condition: Excellent (A)
Mileage: 121,000 miles

Dana 44; 3.07 to 3.73 Ratio; Track Lok

AMC 35; 27 Spline; 29 in. Length AMC Model 35; 27 Spline; 29 in. Length

AMC 35; 27 Spline; 30 1/2 in. Length AMC Model 35; 27 Spline; 30 1/2 in. Length

34.19 in.; 44 Spline Dana 44; 34.19 in. Long; Aftermarket 35 spline upgrade; Uses 1350 Serier Joint

AMC 35; 27 Spline; 29 1/4 in. Length; For Use w/51 Tooth/2.7 in. ABS Ring AMC Model 35; 27 Spline; 29 1/4 in. Length; For Use w/51 Tooth/2.7 in. ABS Ring

Dana 35 (200mm) Rear Axle; 29 Spline; 4340 Chrome-Moly; 32.3 in. Long

Dana 44 Reverse; 5-7166X U-Joint; 30 Spline; 33.6 in. Long Dana 44; Reverse Rotation; 5-7166X U-Joint; 30 Spline; 33.6 in. Long

Dana 30; 27 Spline; 34.5 in. Length Dana 30; 27 Spline; 34.5 in. Length

Dana 44; 33 Spline; 32.3 in. Length; Incl. SET10 Bearings Dana 44 (220mm) JL Non-Rubicon; 4340 Chromoly Axle Kit (1 side); 32 Spline; 32.3 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

with Dana Model 44 Axle without Differential Lock

Replacement; 4340 Chrome-Moly; 30 Spline; 16.96 in. Length; Use w/Dana 44 Differential Dana 44; Replacement; 4340 Chrome-Moly; 30 Spline; 16.96 in. Length; Use w/Dana 44 Differential

with Dana 44 AdvanTEK Axle with E-Locker with Wide Track Axle

Replacement; 4340 Chrome-Moly; 30 Spline; 31.84 in. Length; Use w/Dana 44 Differential Dana 44

Right Rear; Dana 44; Narrow Track; w/E-Locker; 33.2 in. Long

Dana 44; AMC 35; 30 Spline; 29 3/4 in. Length Dana 44; 30 Spline; 29 3/4 in. Length

w/o Disconnect; Cardan Style Axle; For Use w/Dana 30 And Dana 30 Reverse

with 33.57in Length with 5-7166X U-Joint(s) with Locking Differential 1350 Series OE Design with 30 Spline Teeth with Dana 1350 Series Drive Shaft with Dana 44 or Ultimate Dana 44 Axle(s)

Dana 44 Rear; 32.6 in. Long Dana 44. JK Rubicon; Right Rear Axle Kit; 32 5/8 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Dana 30/AMC 35; 30 Spline; 16.6 in. Length Dana 30; Reverse Rotation; 30 Spline; 16.6 in. Length

Dana 30; AMC 35; 27 Spline; 32.36 in. Length Dana 30; Reverse Rotation; 27 Spline; 32.36 in. Length

Dana 35; 29 Spline; 32.2 in. Length Dana 35 (200mm) JL Rear; 4340 Chrome-Moly; 29 Spline; 32.3 in. Long

Dana 44; 32 Spline; 5 Lug; 31 1/4 in. Long Dana 44; JK Rubicon; 32 Spline; 5 Lug; 31 1/4 in. Long

Dana 44; 30 Spline Dana 44; Non-Rubicon JK; 30 Spline

Dana 44; 32 Spline; 5 Lug; 32 5/8 in. Long Dana 44; JK Rubicon; 32 Spline; 5 Lug; 32 5/8 in. Long

with Ultimate Dana 60 Axle

Dana 44; AMC 35; 30 Spline; 29 1/4 in. Length Dana 44; 30 Spline; 29 1/4 in. Length

with Dana Super 44 Rear Axle With Electronic Locking Differential with 32 Splines with 32.54in Length with Axle Shaft Assembly with Axle Bearing and Seal

with Ultimate Dana 60 Axle

Replaces OE Part Number(s) 5086640AA with ABS Ring with Dana 35 Rear Axle

Dana Model 44 Axle

New Design with Dana Super 30 Front Axle with Upgraded 1350 Series Design

AMC 35; 8 in.; HD; 30 11/16 in. Long; 30 Spline; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug AMC Model 35; 30 11/16 in. Long; 30 Spline; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug

AMC 35; 8 in.; 29.25 in. Long; 30 Spline; HD; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug AMC Model 35; 29.25 in. Long; 30 Spline; HD; For Use w/C-Clip/Drum Brake; 2.7 in. Length; 5 Lug

AMC 35; 8 in.; HD; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 30 11/16 in. Length AMC Model 35; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 30 11/16 in. Length

Dana 44; 30 Spline; 5 x 4.5 in. Bolt Pattern; 29.75 in. Long Dana 44; 30 Spline; 5 x 4.5 in. Bolt Pattern; 29.75 in. Long

AMC 35; 8 in.; HD; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 29 1/4 in. Length AMC Model 35; For Use w/Drum Brakes; w/54 Tooth/2.7 in. ABS Ring; 27 Spline; 29 1/4 in. Length

Dana 44; 30 Spline; 23.04 in. Long Dana 44; 30 Spline; 23.04 in. Long

Dana 44; 30 Spline; 29.25 in. Long Dana 44; 30 Spline; 29.25 in. Long

Dana 30; Replacement; 24.25 in. Long Dana 30; Replacement; 24.25 in. Long

Dana 30; AMC 35; 27 Spline; 22.7 in. Length Dana 30; Reverse Rotation; 27 Spline; 22.7 in. Length

Dana 30; AMC 35; 27 Spline; 38.5 in. Length Dana 30; Reverse Rotation; 27 Spline; 38.5 in. Length

Dana 30; Replacement; 41 in. Long Dana 30; Replacement; 41 in. Long

Dana 44; 30 Spline; 5 x 4.5 in. Bolt Pattern; 29.25 in. Long Dana 44; 30 Spline; 5 x 4.5 in. Bolt Pattern; 29.25 in. Long

with 38.51in Shaft Length with Dana 30 Axle with Non ABS

Replaces OE Part Number(s) 5083666AA with 216mm Axle with Dana 44 Axle

with 5-7166X U-Joint(s) with Dana Model Super 30 Axle 34.50in Length with 1350 Series Universal Joint - Required with 27 Splines

Dana 44; 32 Spline; 32.3 in. Length Left Dana 44 (220mm) JL Rubicon; 4340 Chromoly; Left Hand Axle Kit; 32 Spline; 32.2 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

Dana 44; 32 Spline; 33.9 in. Length Right Dana 44 (220mm) JL Rubicon; 4340 Chromoly; Right Hand Axle Kit; 32 Spline; 33.9 in. Long; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)

with 5-760X Universal Joint - Required with Dana 30 Axle Requires 5-760X U-Joint with 27 Spline Teeth with 32.36in Axle

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 31.84in Axle

Replaces OE Part Number(s) 5103014AA with Dana 35 Rear Axle without ABS Ring

with 27 Splines with 5-760X Universal Joint - Required 34.50in Length Requires 5-760X U-Joint with 1310 Series Universal Joint - Required with Dana Model Super 30 Axle

with Dana 30 Axle Replaces OE Part Number(s) 04874306 with ABS

with Casting Number 2002422GJ on Stub Shaft with Dana 44 Front Axle

Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Disconnect Axle

For Use w/Dana 30 Reverse; w/Disconnect; HD U Joint

Exc.Disconnecting Axle

Dana 44 Reverse; Replacement; 26 in. Long Dana 44; Reverse Rotation; Replacement; 26 in. Long

Dana 44 Reverse Dana 44; Reverse Rotation

Dana 30; AMC 35; 15 Spline; 34.7 in. Length Dana 30; Reverse Rotation; 15 Spline; 34.7 in. Length

Replaces OE Part Number(s) 04797134 with ABS with Dana 30 Axle

Replaces OE Part Number(s) 4882350 with Dana 44 Axle with Dana 44 Axle(s)

with Dana Model 44 Axle with Differential Lock

w/o ABS; Front

For Use w/Dana 30

w/ABS; For Use w/Dana 30

For Use w/Dana 30

Condition: Excellent (A)
Mileage: 73,800 miles

Condition: Excellent (A)
Mileage: 133,700 miles

Condition: Excellent (A)
Mileage: 73,800 miles

Condition: Excellent (A)
Mileage: 121,000 miles

Dana 44; Repl. Axle; 32.54 in. Length; 32 Spline; Brake Pilot Surface 2.828 in.; Bearing 1.565 in.; RH[Passenger Side]

Dana 30; Chromoly Inner 27 Spline; 16.50 in. Length; Accepts 5-760X U-Joint; LH[Driver Side] Machined To Accept Full Circle Clips

Condition: Good (B)
Mileage: 84,000 miles

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Driver; Tork Axles Designed To Work w/Aftermarket Differentials

Dana 30; 30 Spline; Driver Uses Large 5-7166X U-Joints

Uni-Ball For 3-Links; Fits JL/JT Factory Diffs [Only] Incl. Installation Tool

Uni-Ball For 3-Links; Fits JL/JT Aftermarket Diffs [Only] And All JK/TJ/LJ/XJ/MJ/ZJ Stock And Aftermarket Diffs

Dana 30; 30 Spline; U-Joint; Passenger Uses Large 5-7166X U-Joints

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Passenger; Tork Axles Designed To Work w/Aftermarket Differentials

with 32 Splines with 5-760X Universal Joint - Required 6.33in Length Requires 5-760X U-Joint with 1310 Series Universal Joint - Required with Dana 30 Axle

Dana 30; 27 Spline; 6.30 in. Length Dana 30; 27 Spline; 6.30 in. Length~Dana 30 JK Front; Outer Stub Axle; 4340 Chromoly; 32 Spline; 6.30 in. Length; Uses 1310 Universal Joint

with 5-7166X U-Joint(s) with Dana 44 or Ultimate Dana 44 Axle(s) 6.33in Length with 1350 Series Universal Joint - Required with 32 Splines with Dana Model Super 30 Axle

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Driver; Placer

Dana 30; Spline Axle; Placer; Driver

Replaces OE Part Number(s) 4728984 with ABS Ring

It is for vehicles with a 2.0L engine and 4-wheel drive (4WD).

Condition: Excellent (A)
Mileage: 58,000 miles

Chrome Moly Steel

Dana 30; Spline Axle; Placer; Passenger

Inner Axle Shaft Dana 44; 30 Spline; Placer For Non-OE Differential; Passenger; Placer

with 6.11in Axle with Dana 30 Axle Requires 5-760X U-Joint with 27 Spline Teeth with 5-760X Universal Joint - Required

1.062in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly Dana 44; 30 Spline; 4340 Chrome-Moly; 26 in. to 32 in. Cut to Fit Axle; Must Be Cut to the Correct length; Triple Drilled for 5 x 4.5. 5 x 5. & 5 x 5.5 bolt patterns.~Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly

Incl. Retainer/Bearing/Seal And Ring; w/Standard And Trac-Lok Differential; For Use w/Dana 44

Condition: Excellent (A)
Mileage: 30,000 miles

Condition: Excellent (A)
Mileage: 59,000 miles

4340 Chromoly; 32 in. Long; 35 Spline; 5 x 4.5 in. 5 x 5.0 in. And 5 x 5.5 in. Bolt Patterns 5 x 4.5 in. 5 x 5.0 in. And 5 x 5.5 in. Bolt Patterns~Dana 44 Aftermarket 35 Spline Rear Axle; 4340 Chromoly; 32 in. Long~Includes Axle Bearing Seal Retainer Studs And ABS Ring

Dana 44; Left Hand Or 30 Spline; 32 in. Long Dana 44; JK Non-Rubicon; 4340 Chromoly Rear Axle Kit; 30 Spline; 32 in. Long; 5 x 5.0 in. Bolt Pattern; Includes Axle Bearing. Seal. Retainer. Studs. and ABS Ring (1 Side)~Dana 44; Non-Rubicon JK; Left Hand Or 30 Spline; 32 in. Long

with Dana 44 AdvanTEK Axle with Open, Trac-Lok, or ARB Differential

with 6.16in Axle with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 5-760X Universal Joint - Required

with Standard Differential with 226mm Axle with 31.885in Shaft Length with Axle Shaft Assembly with Axle Bearing and Seal

with 8.31in Axle with Applications Converting to Manual Locking Hubs Only Design Requires 5-760X U-Joint with 27 Spline Teeth with 5-760X Universal Joint - Required with Dana 30 Axle

Dana 44; 30 Spline; 32 in. Long

Dana 44 w/o E-Locker

Dana 35; 29 Spline; 32.3 in. Long

Dana 44 w/E-Locker

Dana 30; Front; Replacement; 4340 Chrome-Moly Dana 30; Replacement; 4340 Chrome-Moly axle kit; includes inner and outer axles and 1310 spicer U-Joints~Dana 30. JK Non Rubicon; 4340 Chrome-Moly; Front Axle Kit; includes 27 spline inner and outer axles and 1310 spicer U-Joints;

Front; 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Dana 44; Incl. Spicer U-Joints Dana 44; Reverse Rotation; 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Incl. Spicer U-Joints~Dana 44. JK Rubicon; Front Axle Kit; 4340 Chrome-Moly; 30 Spline Inner; 32 Spline Outer; Incl. Spicer U-Joints

Dana 30; Replacement 4340 Chrome-Moly; w/Super Joints Dana 30; Replacement 4340 Chrome-Moly; w/Super Joints~Dana 30 JK; Front Axle Kit; 4340 Chrome-Moly Upgrade; 27 Spline; With 1310 Yukon Super Joints

Dana 30/30 Reverse; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints Dana 30; Reverse Rotation; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints~Dana 30; Front Axle Kit; 4340 Chrome-Moly Upgrade; Includes 27 Spline Inner and Outer Shafts. Disconnect Block Off Kit. and Yukon Super Joints.