Jeep Wrangler Drive Shaft Replacement

It fits 2-door vehicles with a 3.6L engine, 4-wheel drive, and a 6-speed manual transmission.

Condition: Excellent (A)
Mileage: 123,200 miles

It fits 2-door vehicles with 4-wheel drive, the 3.8L engine, and a manual transmission.

Condition: Excellent (A)
Mileage: 102,800 miles

Compressed Length: 38"; Tensile Length: 42" May require boot adjustment to access tensile length

TJ Series

Spicer 35 Axle

For 4x4 vehicles with the 3.6L engine and 5-speed automatic transmission. Built for 2-door models.

Condition: Excellent (A)
Mileage: 101,100 miles

w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))

Original Design Tagged 52098537 w/3.7 In. Axle Yoke

with 39.17 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

Original Design w/NP231 Transfer Case

4 Speed

Use wo/Slip Yoke Eliminator Kit

w/Sales Code DRJ (Dana M35/194 mm Rear Axle)

It fits vehicles with either the 186mm (7.32 inch) axle (option code DJD) or the 210mm axle (option code DJF).

Condition: Excellent (A)
Mileage: 58,000 miles

It fits 4-door vehicles with 4x4 drive, a 3.6L engine, and an automatic transmission. It is designed for vehicles with a wide front axle, a 210mm (8.27 inch) axle ratio, and sales code DJF.

Condition: Excellent (A)
Mileage: 29,100 miles

with 38.27 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

Original Design

4 Speed

This is a front drive shaft assembly for vehicles with an automatic transmission.

Condition: Excellent (A)
Mileage: 92,100 miles

0 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit

TJ Series

w/ Dana 216 mm Axle

Incl. 3.25 in. 1310 Rear U-Joint

Lift Height 6 in.

Rear; 1310 U-Joint; Automatic Transmission Only Dana 44; 1310 U/Joint; auto trans; 2 door~Dana 44 Rear; 2 Door JK; w/ Automatic Transmission; Fits Stock Pinion Yoke; Includes Transfer Case Yoke;

Front; 1310 U-Joint; Manual Transmission Only Dana 30 or Dana 44 front; 1310 u/joint/ 2 door or 4 door; manual transmission~Front Driveshaft; Fits Stock Pinion Yoke; Includes Transfer Case Yoke; w/ Manual Transmission;

Front; 1310 U-Joint; Automatic Transmission Only Dana 30 or Dana 44; 1310 U/Joint~CV Front Driveshaft; Fits Stock Pinion Yoke; Includes Transfer Case Yoke; w/ Automatic Transmission;

Rear; 1310 U-Joint; Manual Transmission Only Dana 44; 1310 U/joint; 2 door; manual transmission~Dana 44 Rear; 2 Door JK; w/ Manual Transmission; Fits Stock Pinion Yoke; Includes Transfer Case Yoke;

1310 U-Joint; Manual Transmission Only Dana 44; 1310 U Joint; Manual Transmission Only~Dana 44 Rear; 2 Door JK; w/ Manual Transmission; Includes Pinion yoke and Transfer Case Yoke.

Rear; 1310 U-Joint; Automatic Transmission Only Dana 44; 1310 U-Joints; Includes Pinion Yoke; Transfer Case Yoke; and Retaining Hardware; collapsed length of 22 in.; extended length of 25 in.; mesured from center of U-Joint to center of U-Joint; Requires pinion flange replacement; Crush sleeve/ solid spacer; pinion seal; etc. are not included~Dana 44 Rear; 1310 HD CV Driveshaft; Includes 1310 Pinion Yoke. Transfer Case Yoke. and Retaining Hardware; Requires pinion flange replacement;

Front; 1310 U-Joint; Automatic Transmission Only Dana 30; 1310 U Joint~Front Driveshaft; Includes Pinion Yoke and Transfer Case Yoke

Rear; 1310 U-Joint; Automatic Transmission Only Dana 44; 1310 U-Joints; Transfer Case Yoke; and Retaining Hardware; collapsed length of 40.875 in.; extended length of 43.875 in.; mesured from center of U-Joint to center of U-Joint~Dana 44 Rear; 1310 HD CV Driveshaft; Fits Stock Pinion Flange; Includes new Transfer Case Yoke and Retaining Hardware;

Front; 1310 U-Joint With Dana 30 / 186mm Front Axle; Includes Pinion Yoke and Transfer Case Yoke; 1310 U/Joints

Front; 1310 U-Joint; Automatic Transmission Only Dana 30 or Dana 44; 1310 U Joint~Front Driveshaft; Fits stock pinion flange. Includes new transfer case yoke

Rear; 1310 U-Joint; Automatic Transmission Only Dana 44; 1310 U-Joints; Transfer Case Yoke; and Retaining Hardware; collapsed length of 19.75 in.; extended length of 22.75 in.; mesured from center of U-Joint to center of U-Joint~Dana 44 Rear; 2 Door JK; 1310 HD CV Driveshaft; Includes Transfer Case Yoke and Retaining Hardware

Front; 1310 U-Joint; Automatic Transmission Only 1310 U Joint~Front Driveshaft; Includes Pinion Yoke and Transfer Case Yoke; w/ Automatic Transmission;

Rear; 1310 U-Joint; Automatic Transmission Only Dana 44; 1310 U/Joint~Dana 44 Rear; 2 Door JK; w/ Automatic Transmission; Includes Pinion Yoke and Transfer Case Yoke

0 to 6 In. Lift Conversion Shaft/Kit Includes New Spicer Style Transfer Case Yoke

0 to 6 In. Lift 1310 Series Conversion Conversion Shaft Includes New Transfer Case Yoke

0 to 6 In. Lift Conversion Shaft Includes New Transfer Case Yoke

Original Design w/NP231 Transfer Case

Original Design

w/Sales Code DJS (Next Gen. Dana 44 HD Front Axle)

w/Sales Code DJR (Next Gen. Dana 30 Solid Front Axle)

Rear; 1310 U-Joint; Automatic Transmission Only Dana 44; 1310 U-Joints; Includes Pinion Yoke; Transfer Case Yoke; and Retaining Hardware; collapsed length of 42.625 in.; extended length of 45.625 in.; mesured from center of U-Joint to center of U-Joint; Requires pinion flange replacement; Crush sleeve/ solid spacer; pinion seal; etc. are not included~Dana 44 Rear; 4 Door JK; 1310 HD CV Driveshaft; Includes 1310 Pinion Yoke. Transfer Case Yoke. and Retaining Hardware; Requires pinion flange replacement

Rear; 1310 U-Joint; Manual Transmission Only Dana 44; 1310 U/Joint; standard transmission; 4 door~Dana 44 Rear; 4 Door JK; w/ Manual Transmission; Fits Stock Pinion Yoke; Includes Transfer Case Yoke;

Rear; 1310 U-Joint 4 Door JL; with Dana 35 / 200mm Rear Axle; w/Automatic Transmission; Includes Pinion Yoke and Transfer Case Yoke; 1310 U/Joints

1310 U-Joint; Automatic Transmission Only Dana 44; 1310~Dana 44 Rear; 4 Door JK; w/ Automatic Transmission; Fits Stock Pinion Yoke; Includes Transfer Case Yoke;

1310 U-Joint; Manual Transmission Only Dana 44 Rear; 4 Door JK; w/ Manual Transmission; Includes Pinion yoke and Transfer Case Yoke.

w/Sales Code DJS (Next Gen. Dana 44 HD Front Axle)

w/Sales Code DJS (Next Gen. Dana 44 HD Front Axle)

231 Series Transfer Case Dana 44 Rear Axle

38 in. Collapsed Length

Use wo/Slip Yoke Eliminator Kit

Not For Lifted Vehicles OE Style Shaft

Original Design w/NP231 Transfer Case

with 39.45 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

Not For Lifted Vehicles OE Style Shaft w/Sales Code DHW (Command-Trac Part Time Low Range 4WD)

Not For Lifted Vehicles OE Style Shaft w/Sales Code DHE (Command-Trac Shift-On-The-Fly 4WD)

w/Sales Code DRZ (Next Generation Dana 44 Heavy Duty Rear Axle)

Spicer 44 Axle

8.25 in.; 10 Bolt; For Use w/Dana 30 Reverse/35/44; 3 in. To 4 in. Lift

37.95 in. Collapsed Length

with 38.07 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

0 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit wo/2.150 Flange Pilot Dimension

4 to 6 In. Lift

Front; 1310 U-Joint; Manual Transmission Only Dana 30 or Dana 44; 1310 U Joint; Manual Transmission Only~Front CV Driveshaft; Includes Pinion yoke and Transfer Case Yoke; w/ Manual Transmission;

2 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit

w/Sales Code DHN (Command-Trac Part Time 4WD System)

Front; 1310 U-Joint With Dana 30/ 186mm Front Axle; w/ Automatic Transmission; Heavy Duty Front Driveshaft; Includes Transfer Case Yoke; Fits Stock Pinion Yoke

Steel

Heavy Duty

Heavy Duty

Heavy Duty

Heavy Duty

8.25 in.; 10 Bolt; For Use w/Dana 30 Reverse/35/44; 1 in. To 3 in. Lift; 3 5/8 Wide U Bolts

1310 U-Joint; Recommended For Up To 35 in. Tires Dana 44; 1310 U Joint~Dana 44 Rear; 4 Door JK; w/ Automatic Transmission; Includes Pinion Yoke and Transfer Case Yoke

with 22.99 (in) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New

0 to 3 In. Lift

39.49 in. Collapsed Length

0 to 6 In. Lift Use Only w/Slip Yoke Eliminator Kit

with Dana 1310 Series Drive Shaft with this Fits 2-4in Lift with Transfer Case Yoke/Flange - Not Included

4 to 6 In. Lift Converted Shaft for Lifted Vehicles

0 to 3 In. Lift Converted Shaft for Lifted Vehicles

0 to 6 In. Lift Converted Shaft for Lifted Vehicles

4 to 6 In. Lift

with 3" - 6" Lift Kit

with 3" - 6" Lift Kit

with 2.5" - 6" Lift Kit

with Dana 1310 Series Drive Shaft with this Fits 0-2in Lift with Transfer Case Yoke/Flange - Not Included

8.25 in.; 10 Bolt; For Use w/Dana 30 Reverse/35/44; 1 in. To 3 in. Lift

For Use w/Dana 30/35/44; 2 in. To 6 in. Lift

w/Sales Code DHW (4:1 Rock-Trac HD Part Time 4WD System)

with 2.5" - 6" Lift Kit

For Use w/Dana 30/35/44; 3.5 in. To 6 in. Lift

with 3" - 6" Lift Kit

with 3" - 6" Lift Kit

1310 U-Joint 4 Door JL; with Dana 35 / 200mm Rear Axle; w/ Manual Transmission; Includes Pinion Yoke and Transfer Case Yoke; 1310 U/Joints

1310 HD U-Joint; Dana 35

Dana 35; 1310 HD U-Joint

1310 HD U-Joint; Dana 35; with Selec Trac

Front; 1310 U-Joint With Dana 30/ 186mm Front Axle; w/ Manual Transmission; Heavy Duty Front Driveshaft; Includes Transfer Case Yoke; Fits Stock Pinion Yoke

0 to 6 In. Lift Conversion Shaft

1310 HD U-Joint; Dana 30;with Selec-Trac

1310 U-Joint; Automatic Transmission Only 2 Door JL; with Dana 35 / 200mm Rear Axle; w/Automatic Transmission Includes Pinion Yoke and Transfer Case Yoke; 1310 U/Joints

1310 OE-style U-Joint; Dana 30; with Selec Trac

w/ Command Trac - Part Time 4WD System

For Use w/0 To 4.5 in. Lift

1350 U-Joint 4 Door JL; with Manual Transmission; with Dana 35 / 200mm Rear Axle; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

Front; 1350 U-Joint With Dana 30/ 186mm Front Axle; w/ Manual Transmission; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

1350 Heavy Duty U-Joint; Dana 35; with Selec Trac

1350 Heavy Duty U-Joint; with Selec Trac

1350 U-Joint; Automatic Transmission Only 2 Door JL; with Automatic Transmission; with Dana 35 / 200mm Rear Axle; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

1350 U-Joint 2 Door JL; with Manual Transmission; with Dana 44 / 220mm Rear Axle; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

Front; 1350 U-Joint 4 Door JL; With Dana 44/ 210mm Front Axle; w/ Manual Transmission; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

Front; 1350 U-Joint With Dana 44/ 210mm Front Axle; w/ Automatic Transmission; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

1350 U-Joint 4 Door JL; with Automatic Transmission; with Dana 44 / 220mm Rear Axle; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

1350 Heavy Duty U-Joint; with Selec Trac

1350 U-Joint 4 Door JL; with Automatic Transmission; with Dana 35 / 200mm Rear Axle; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

Front; 1350 U-Joint With Dana 30/ 186mm Front Axle; Includes Pinion Yoke and Transfer Case Yoke; 1350 U/Joints

1350 U-Joint; Manual Transmission Only Dana 44; 1350 Ujoint; manual transmission; 2 door~Dana 44 Rear; 2 Door JK; Includes Pinion Yoke. Transfer Case Yoke. and Retaining Hardware; w/ Manual Transmission

Rear; 1350 U-Joint; Automatic Transmission Only Dana 44; 1350 Ujoint; auto trans; 2 door~Dana 44 Rear; 2 Door JK; w/ automatic Transmission; Includes Pinion Yoke. Transfer Case Yoke. and Retaining Hardware;

Front; 1350 U-Joint; Manual Transmission Only Dana 30 or Dana 44; 1350 Ujoint; manual transmission~Front CV Driveshaft; Includes Pinion Yoke. Transfer Case Yoke. and Retaining Hardware; w/ Manual Transmission

Rear; 1350 U-Joint; Automatic Transmission Only Dana 44; 1350 U Joint; 4 door~Dana 44 Rear; 4 Door JK; Includes Pinion Yoke and Transfer Case Yoke

Rear; 1350 U-Joint; Automatic Transmission Only Dana 44; 1350 U Joint; 2 door~Dana 44 Rear; 2 Door JK; Includes Pinion Yoke and Transfer Case Yoke

Rear; 1350 U-Joint; Automatic Transmission Only Dana 44; 1350 Ujoint; 4 door; automatic transmission~Dana 44 Rear; 4 Door JK; w/ automatic Transmission; Includes Pinion Yoke. Transfer Case Yoke. and Retaining Hardware;

Front; 1350 U-Joint; Automatic Transmission Only Dana 30 or Dana 44; 1350 U Joint~Front Driveshaft; Includes Pinion Yoke and Transfer Case Yoke;

Front; 1350 U-Joint; Automatic Transmission Only 1350 U-Joints; Includes Pinion Yoke; Transfer Case Yoke; and Retaining Hardware; collapsed length of 36.25 in.; extended length of 39.25 in.; mesured from face of flange to center of U-Joint; Requires pinion flange replacement; Crush sleeve/ solid spacer; pinion seal; etc. are not included~Front; Includes Pinion Yoke. Transfer Case Yoke. and Retaining Hardware; w/ Automatic Transmission

1350 U-Joint; Manual Transmission Only Dana 44; 1350 U Joint; Manual Transmission Only; 4 door~Dana 44 Rear; 4 Door JK; Includes Pinion Yoke. Transfer Case Yoke. and Retaining Hardware; w/ Manual Transmission

Supersedes part # 52123551AB

w/ Dana 186mm Axle