Jeep Wrangler Suspension Stabilizer Bar Link Replacement

2 Required; Sold Individually

OE Design

Front; M12 x 1.75 x 58mm

Front

Rear

Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Includes a Metal Bar and Steel Inner Sleeve to Improve Durability

Type 1

Pair

OE Bracket not Required Link With 1 Stud(s) Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Includes A Full Ball Stud To Provide 360 Degrees Of Smooth Rotational Movement

END LINK

Includes a Metal Bar and Steel Inner Sleeve to Improve Durability

Non-Greasable

For 5.5 in Lift; Pair

Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

OE Bracket not Required Link With 1 Stud(s) Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces

Includes A Full Ball Stud To Provide 360 Degrees Of Smooth Rotational Movement

REQUIRED FOR RUBICON MODELS W/ 3" LIFT KIT TO KEEP ELECTRONIC SWAY BAR FUNCTIONING CORRECTLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Pair; For Use w/2.5 in. Suspension Lift

Pair; Extended Length; For Use w/4 in. Suspension Lift

Lift Height 6-8 in.

Lift Height 2-4 in.; Black Rubber Bushings

Lift Height 2-3.5 in.; Black Rubber Bushings

Lift Height 6 in.

Lift Height 4-5 in.

Link Assembly ; Stabilizer Bar ; Complete Chassis Parts Module ; Electronic Front Sway Bar Disconnect

Pair; Front; For Use w/4 in. Suspension Lift

Front Lift Height 4 in.; Black Rubber Bushings

For 1-1.5 in. Lift

3-5 in.

3-5 in.

Pair; Quick Disconnect; For Use w/4 in. To 5 in. Of Lift

For 3-6 in. Lifts

For 2-2.5 in. Lifts

Lift Height 8 in.; Black Rubber Bushings

Fitment of FK105 is required to allow shocks to extend freely without limit or contact.

4WD, With 3 - 4" Front Raised Height, With Quick Disconnect

Pair; Quick Disconnect; For Use w/3.5 in. To 4 in. Of Lift

Stabilizer Bar ; Rear Suspension ; Normal Duty Suspension ; Width= 18.010 Inches, Height= 0.500 Inches, Length= 51.030 Inches

Eibach 18-19 Jeep JL Rubicon Rear Anti-Roll Kit

Eibach 18-19 Jeep JL Rubicon Front Anti-Roll Kit

4WD, With 3 - 4" Front Raised Height, With Quick Disconnect

Lower Link Set; Lift Height 1-4 in.; w/RB Bushings