Jeep Wrangler Suspension Track Bar Bracket Replacement

Front OEM; Lift Height 2-5 in.

Rear OEM; Lift Height 2-5 in.

JKS Manufacturing Jeep Wrangler JK OE Replacement Track Bar Brace - Rear

Dana 30/Dana 44; Heavy Duty Steel Construction; Unpainted; Maintains Factory Track Bar Mounting Location; Welding Required

Lift Height 2-4 in.

4 in. Lift

4 in. Lift

Lift Height 3-5 in. Dana 30~Dana 35~Dana 44

Dana 44

Lift Height; 3.5-5 in. Dana 30~Dana 35~Dana 44

FKWTJ02 Panhard Rod Bracket is mandatory to ensure correct rear axle tracking Important: FK16, FKWTJ02 & JWGK01 are all mandatory for proper installation. Failure to install any of these kits will void OME warranty.

Lower

Lift Height 6-8 in.

4 in. Lift

4 in. Lift

Incl. Inner/Outer Brackets; Hardware; Some Welding Required

3-4 in. Lift

Incl. Inner/Outer Brackets; Hardware; Some Welding Required

Dana 30~Dana 44

For 3-5 in. Lift; Weld On

For 3-5 in. Lift; Weld On

; 4 in. Drop

Fitment of Panhard rod extension bracket is not mandatory, but fitment will improve the ride

Fitment of Panhard rod extension bracket is not mandatory, but fitment will improve the ride

For 3-5 in. Lift; Bolt On w/Support

For 3-5in. Lift; Bolt On w/Support

Lift Height 3-5 in. Dana 30~Dana 35~Dana 44

Reinforced Bracket

HD

High Steer; Incl.Hardware

with Front Raised Height 3.0 (in) to 4.0 (in) Must Be Used with RS62100

For Rear Trac Bar

For Rear Trac Bar

Incl. Adjustable Track Bar; Track Bar Bracket; For Use w/6 in. Lift

High Steer; Incl.Hardware; Inner and Outer Brackets