2002 Kia Rio Disc Brake Caliper - Front Right (Raybestos)

Partslink #: FRC11778

Replaces RC11778

$45.05 View part →

✓ In Stock

Installation Hardware Included with Metal Piston Sell Out and Reorder 19-2673 Supplied with Mounting Bracket

$57.41 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Centric)

Partslink #: 141.50224

$59.44 View part →

✓ In Stock

2006-2012 Kia Rio Disc Brake Caliper - Rear Right (Raybestos)

Partslink #: FRC12537C

$57.59 View part →

✓ In Stock

2012-2018 Kia Rio Disc Brake Caliper - Front Left (Centric)

Partslink #: 141.51008

$61.53 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: Cl15, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.755, Mounting Hole Thread Diameter: 0.755, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.011, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2001-2002 Kia Rio Disc Brake Caliper - Front Right (Cardone)

Partslink #: 19-1753

Installation Hardware Included with Metal Piston Supplied without Mounting Bracket

$57.72 View part →

✓ In Stock

2001-2002 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97-07803A

$61.85 View part →

✓ In Stock

2012-2022 Kia Rio Disc Brake Caliper - Front Right (Centric)

Partslink #: 141.50053

$59.44 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: Ctk 6, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.315, Mounting Hole Thread Diameter: 0.315, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.217, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2006-2007 Kia Rio Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-3477

Installation Hardware Included with Metal Piston Supplied without Mounting Bracket

$67.67 View part →

✓ In Stock

2001-2002 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97-07803B

$61.85 View part →

✓ In Stock

2003-2005 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-01816A

Supplied w/ Mounting Bracket

$70.23 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: Ctk, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.217, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-B3476

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$62.44 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: No, Caliper Type: Floating, Casting Number: Bk5, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.31, Mounting Hole Thread Diameter: 0.31, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.124, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Cardone)

Partslink #: 19-3300

Installation Hardware Included with Metal Piston Supplied without Mounting Bracket

$71.98 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: Ctk 6, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.315, Mounting Hole Thread Diameter: 0.315, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.217, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-3476

Installation Hardware Included with Metal Piston Supplied without Mounting Bracket

$67.27 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-01831B

Supplied w/ Mounting Bracket

$72.67 View part →

✓ In Stock

2003-2005 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-01816B

Supplied w/ Mounting Bracket

$70.23 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 193300/1, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Mounting Hole Thread size: M12x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.124, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Cardone)

Partslink #: 19-B3300

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$74.83 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: Bk5, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.31, Mounting Hole Thread Diameter: 0.31, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.124, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Right (Cardone)

Partslink #: 19-3301

Installation Hardware Included with Metal Piston Supplied without Mounting Bracket

$71.30 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: Bc140169, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Inverted Flare, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Mounting Hole Thread size: M10x1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.335, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B6811

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$78.30 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-01831A

Supplied w/ Mounting Bracket

$72.67 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-00871A

Supplied w/ Mounting Bracket

$79.14 View part →

✓ In Stock

2012-2018 Kia Rio Disc Brake Caliper - Rear Right (Centric)

Partslink #: 141.50503

$76.84 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-21623

$88.49 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-00871B

Supplied w/ Mounting Bracket

$79.14 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-01830A

Supplied w/ Mounting Bracket

$89.18 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-21622

$88.49 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (BBB Industries)

Partslink #: 99-01847B

Supplied w/ Mounting Bracket

$91.56 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99-01830B

Supplied w/ Mounting Bracket

$89.18 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L3300

$93.77 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (BBB Industries)

Partslink #: 99-01847A

Supplied w/ Mounting Bracket

$91.56 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P01830A

Supplied w/ Mounting Bracket

$94.66 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L6795

$93.92 View part →

✓ In Stock

2012-2022 Kia Rio Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-3454315

$99.76 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P01830B

Supplied w/ Mounting Bracket

$94.66 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L15162

$103.14 View part →

✓ In Stock

2012-2022 Kia Rio Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-3413573

$100.87 View part →

✓ In Stock

2006-2007 Kia Rio Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-3370485

$103.26 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L15163

$103.14 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L6794

$104.11 View part →

✓ In Stock

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-3458508

$103.26 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-03003

$106.73 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L3301

$103.91 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Mando)

Partslink #: 16A5198

OE Manufacturer

$110.56 View part →

✓ In Stock

2006-2011 Kia Rio Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-03002

$106.73 View part →

✓ In Stock

2003-2005 Kia Rio Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L2918

$112.05 View part →

✓ In Stock

2003-2005 Kia Rio Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L2919

$112.05 View part →

✓ In Stock

2003-2005 Kia Rio Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-3493529

$116.00 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Right (Mando)

Partslink #: 16A5005

OE Manufacturer

$114.42 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Mando)

Partslink #: 16A5004

OE Manufacturer

$116.08 View part →

✓ In Stock

2003-2005 Kia Rio Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-3471706

$116.00 View part →

✓ In Stock

2012-2018 Kia Rio Disc Brake Caliper - Rear Left (Dynamic Friction)

Partslink #: 331-21603

Except Mexico Built 256mm Rear Disc

$123.35 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Mando)

Partslink #: 16A5200

w/o Brake Pads OE Manufacturer

$122.71 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Mando)

Partslink #: 16A5201

OE Manufacturer

$127.67 View part →

✓ In Stock

2012-2018 Kia Rio Disc Brake Caliper - Rear Right (Dynamic Friction)

Partslink #: 331-21602

$123.35 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-3487146

$140.62 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M8x1.0, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Zinc Plated, Caliper Slides Included: Yes, Caliper Type: Floating, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.394, Mounting Hole Thread Diameter: 0.394, Pad Wear Sensor Included: Yes, Pads Included: No, Piston Diameter: 1.22, Piston Material: Steel, Piston Quantity: 1, Product Condition: New, Rust Resistant Coating: Yes

✓ In Stock

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 2C-3476

Installation Hardware Included with Metal Piston Obsolete Supplied with Mounting Bracket

$140.20 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-3489075

$148.97 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-3443815

$140.62 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Raybestos)

Partslink #: FRC12550N

$152.21 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-3432016

$148.97 View part →

✓ In Stock

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

Partslink #: W0133-2211530

$222.14 View part →

Kia Rio Disc Brake Caliper Replacement

2002 Kia Rio Disc Brake Caliper - Front Right (Raybestos)

2006-2011 Kia Rio Disc Brake Caliper - Rear Left (Centric)

2006-2011 Kia Rio Disc Brake Caliper - Rear Right (Centric)

2001-2002 Kia Rio Disc Brake Caliper - Front Left (Centric)

2001-2002 Kia Rio Disc Brake Caliper - Front Right (Centric)

2006-2011 Kia Rio Disc Brake Caliper - Rear Left (Raybestos)

2006-2012 Kia Rio Disc Brake Caliper - Front Right or Rear Right (Raybestos)

2006-2011 Kia Rio Disc Brake Caliper - Rear Left (Raybestos)

2001-2002 Kia Rio Disc Brake Caliper - Front Right (Cardone)

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Centric)

2006-2012 Kia Rio Disc Brake Caliper - Rear Right (Raybestos)

2012-2018 Kia Rio Disc Brake Caliper - Front Left (Centric)

2001-2002 Kia Rio Disc Brake Caliper - Front Right (Cardone)

2001-2002 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

2012-2022 Kia Rio Disc Brake Caliper - Front Right (Centric)

2006-2007 Kia Rio Disc Brake Caliper - Rear Left (Cardone)

2001-2002 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

2003-2005 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Cardone)

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

2006-2011 Kia Rio Disc Brake Caliper - Rear Left (BBB Industries)

2003-2005 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Cardone)

2006-2011 Kia Rio Disc Brake Caliper - Front Right (Cardone)

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Cardone)

2006-2011 Kia Rio Disc Brake Caliper - Rear Right (BBB Industries)

2012-2017 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

2012-2018 Kia Rio Disc Brake Caliper - Rear Right (Centric)

2006-2011 Kia Rio Disc Brake Caliper - Rear Left (Dynamic Friction)

2012-2017 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

2006-2011 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

2006-2011 Kia Rio Disc Brake Caliper - Rear Right (Dynamic Friction)

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (BBB Industries)

2006-2011 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Powerstop)

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (BBB Industries)

2006-2011 Kia Rio Disc Brake Caliper - Front Left (BBB Industries)

2012-2017 Kia Rio Disc Brake Caliper - Front Right (Powerstop)

2012-2022 Kia Rio Disc Brake Caliper - Front Left (Autopart International)

2006-2011 Kia Rio Disc Brake Caliper - Front Right (BBB Industries)

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Powerstop)

2012-2022 Kia Rio Disc Brake Caliper - Front Right (Autopart International)

2006-2007 Kia Rio Disc Brake Caliper - Rear Left (Autopart International)

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Powerstop)

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Powerstop)

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Autopart International)

2006-2011 Kia Rio Disc Brake Caliper - Front Left (Dynamic Friction)

2006-2011 Kia Rio Disc Brake Caliper - Front Right (Powerstop)

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Mando)

2006-2011 Kia Rio Disc Brake Caliper - Front Right (Dynamic Friction)

2003-2005 Kia Rio Disc Brake Caliper - Front Left (Powerstop)

2003-2005 Kia Rio Disc Brake Caliper - Front Right (Powerstop)

2003-2005 Kia Rio Disc Brake Caliper - Front Left (Autopart International)

2012-2017 Kia Rio Disc Brake Caliper - Front Right (Mando)

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Mando)

2003-2005 Kia Rio Disc Brake Caliper - Front Right (Autopart International)

2012-2018 Kia Rio Disc Brake Caliper - Rear Left (Dynamic Friction)

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Mando)

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Mando)

2012-2018 Kia Rio Disc Brake Caliper - Rear Right (Dynamic Friction)

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Autopart International)

2006-2007 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

2012-2017 Kia Rio Disc Brake Caliper - Front Left (Autopart International)

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Autopart International)

2012-2017 Kia Rio Disc Brake Caliper - Rear Left (Raybestos)

2012-2017 Kia Rio Disc Brake Caliper - Front Right (Autopart International)

2012-2017 Kia Rio Disc Brake Caliper - Rear Right (Cardone)

What buyers are saying.

Racing Partner Videos

Disc Brake Caliper Compatibility for Kia Rio

Available Trims

Body Types

Engine Options

Transmissions