1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97-17248A

$34.58 View part →

✓ In Stock

1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97-17248B

$34.58 View part →

✓ In Stock

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Raybestos)

Partslink #: FRC4138

GM Brake Code JA1 Or JA8 Light And Medium Duty Brakes Replaces RWC5237

$35.16 View part →

✓ In Stock

1990-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Centric)

Partslink #: 141.62076

$36.14 View part →

✓ In Stock

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97-17251B

$36.31 View part →

✓ In Stock

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97-17251A

$36.31 View part →

✓ In Stock

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Centric)

Partslink #: 141.62073

$36.59 View part →

✓ In Stock

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97P17251A

$39.16 View part →

✓ In Stock

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Raybestos)

Partslink #: FRC4125C

$36.84 View part →

✓ In Stock

1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 97P17248B

$39.46 View part →

✓ In Stock

1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97P17248A

$39.46 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: No, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 290636, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: Yes, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.69, Mounting Hole Thread Diameter: 0.69, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.496, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

1987-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Cardone)

Partslink #: 18-4195

GM Brake Code JA2 Installation Hardware Included with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker

$52.83 View part →

✓ In Stock

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 97P17251B

$40.42 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 366, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: Yes, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.618, Mounting Hole Thread Diameter: 0.618, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.496, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Cardone)

Partslink #: 18-4072

Installation Hardware Included with Metal Piston

$53.57 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 367, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: Yes, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.618, Mounting Hole Thread Diameter: 0.618, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.496, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Cardone)

Partslink #: 18-4071

Installation Hardware Included with Metal Piston

$53.33 View part →

✓ In Stock

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (ACDelco)

Partslink #: W0133-1918130

Light Duty Brakes - JA1 - Single Piston Caliper

$72.02 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.5, Bracket Included: No, Caliper Color: Gray, Caliper Finish: Oil Emulsion, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 931, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.5, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.698, Mounting Hole Thread Diameter: 0.698, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 2.24, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

✓ In Stock

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Cardone)

Partslink #: 18-4253

GM Brake Code JA1 Installation Hardware Included with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker

$57.74 View part →

✓ In Stock

1988-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L4195

Brake Code JA2; JA8

$79.68 View part →

✓ In Stock

1988-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L4194

Brake Code JA2; JA8

$79.68 View part →

✓ In Stock

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L4072

$83.82 View part →

✓ In Stock

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L4071

$83.82 View part →

✓ In Stock

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (ACDelco)

Partslink #: W0133-2057029

$92.68 View part →

✓ In Stock

1987-1990 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (ACDelco)

Partslink #: W0133-2037591

Heavy Duty Brakes, JA2, 1 Piston Caliper; Medium Duty Brakes, JA8, 1 Piston Caliper

$89.05 View part →

✓ In Stock

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-47055

$98.60 View part →

✓ In Stock

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (ACDelco)

Partslink #: W0133-2056928

$91.58 View part →

✓ In Stock

1982-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Dynamic Friction)

Partslink #: 331-47063

$134.62 View part →

✓ In Stock

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Cardone)

Partslink #: W0133-1818670

Single Piston Caliper

$91.74 View part →

✓ In Stock

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (ACDelco)

Partslink #: W0133-1918535

$97.96 View part →

✓ In Stock

1982-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Dynamic Friction)

Partslink #: 331-47062

$134.62 View part →

✓ In Stock

1982-1983 Oldsmobile Cutlass Cruiser Front Disc Brake Caliper - Right (Passenger) (Used OEM)

Partslink #: 536-01441R

Condition: Excellent (A)
Mileage: 105,900 miles

$49.95 View part →

✓ In Stock

1982-1983 Oldsmobile Cutlass Cruiser Front Disc Brake Caliper - Right (Passenger) (Used OEM)

Partslink #: 536-01441R

Condition: Excellent (A)
Mileage: 127,400 miles

$49.95 View part →

Oldsmobile Cutlass Cruiser Disc Brake Caliper Replacement

1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Raybestos)

1990-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Centric)

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Centric)

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Raybestos)

1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (BBB Industries)

1980-1981 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

1987-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Cardone)

1983-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (BBB Industries)

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Cardone)

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Cardone)

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (ACDelco)

1987-1989 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Cardone)

1988-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Powerstop)

1988-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Powerstop)

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Powerstop)

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Powerstop)

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (ACDelco)

1987-1990 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (ACDelco)

1980-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Dynamic Friction)

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (ACDelco)

1982-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Left (Dynamic Friction)

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Cardone)

1991-1994 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (ACDelco)

1982-1983 Oldsmobile Cutlass Cruiser Disc Brake Caliper - Front Right (Dynamic Friction)

1982-1983 Oldsmobile Cutlass Cruiser Front Disc Brake Caliper - Right (Passenger) (Used OEM)

1982-1983 Oldsmobile Cutlass Cruiser Front Disc Brake Caliper - Right (Passenger) (Used OEM)

What buyers are saying.

Racing Partner Videos

Disc Brake Caliper Compatibility for Oldsmobile Cutlass Cruiser

Available Trims

Body Types

Engine Options

Transmissions