Plymouth Fury Differential Replacement

Dana 60/70/70U/70HD Dana 60~Outer slinger; 2.250 in. O.D.

Dana 60 Reverse Dana 60~Inner slinger; 4.496 in. O.D.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 60; Bulkhead Quick-Disconnect Fitting

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

27 Spline; 2.56 And Up Yukon Dura Grip Positraction; Chrysler 8.25 in. Rear; 27 Spline

31 Spline; 1.32 in. Axle Shaft Diameter; 2.76 - 4.56 Ring Gear Pinion Ratio

30 Spline; 1.28 in. Axle Shaft Diameter; 2.76 - 4.56 Ring Gear Pinion Ratio; Rear 8.75 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

31 Spline; Composite Clutch Chrysler 9.25 in.; 31 Spline; Composite Clutch~Yukon Positraction Carrier (Limited Slip); Fits Chrysler 9.25 in. Rear; 31 Spline; Composite Clutches;

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

30 Spline; 1.28 in. Axle Shaft Diameter; 2.76 - 4.56 Ring Gear Pinion Ratio; Rear 8.75 in.

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

Dana 60; 35 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60 Rear; 35 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 30 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.10 and Down Ratio or Thick Gears

Dana 60; 30 Spline; 4.56 And Up~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.56 and Up Ratio

Dana 60; 35 Spline; 4.56 And Up~Yukon Dura Grip Positraction; Dana 60; 35 spline; 4.56 and Up; 4 Pinion Design; w/o C-clips

35 Spline; 4.10 And Down Dana 60; 35 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 4.10 And Down Dana 60; 30 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 4.56 And Up Dana 60; 30 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.56 And Up; w/ Full Float Axle

30 Spline; 3.92 And Up; Dana 44; Front and Rear

31 Spline; 1.32 in. Axle Shaft Diameter; 2.76 - 4.56 Ring Gear Pinion Ratio; Rear 9.25 in.

Dana 60/Reverse; 35 Spline; 4.56 And Up Dana 60; 35 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.56 And Up; w/ Full Float Axle

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

Dana 60; 40 Spline; 4.10 And Down Dana 60; 40 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline Upgrade; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 70HD; Rear Dana 70 Use Detroit Locker PN[225S18] If 2 Piece; PN[225SL58A/B/C/D] If One Piece

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

40 Spline; 4.56 And Up Dana 60; 40 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline; 4.56 And Up; w/ Full Float Axle

29 Spline; 1.21 in. Axle Shaft Diameter; Rear 8.375 in.; 2.73 And Up Ring Gear Pinion Ratio

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Competition Only; 35 Spline Axles; 4.56 And Up Dana 60; Competition Only; 35 Spline Axles; 4.56 And Up

Competition Only; 35 Spline Axles; 4.10 And Down Dana 60; Competition Only; 35 Spline Axles; 4.10 And Down

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

35 Spline; 4.56 Ratio And Up Dana 60; 35 Spline; 4.56 Ratio And Up

30 Spline; 4.10 Ratio And Down Dana 60; 30 Spline; 4.10 Ratio And Down

30 Spline; 4.56 Ratio And Up Dana 60; 30 Spline; 4.56 Ratio And Up

Dana 60/Reverse; 35 Spline; 4.10 Ratio And Down Dana 60; 35 Spline; 4.10 Ratio And Down

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Chrysler 8.75 in.; Case 489; 3.55 Ratio; 30 Spline; Nodular Iron; Bare; w/ Sure Grip Power-Lok; w/o Yoke w/ Power-Lok Limited Slip

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter

Currie Performance 31 Spline Axles