Ram 1500 Classic Suspension Lift Kit Replacement

1 in. Rear; For Models w/o Air Ride Suspension

1.75 in. Front Leveling Kit Wheel Drive: 4WD

2 in. Lift; Front; Incl. Upper/Lower Strut Spacers; Maximum Tire/Wheel: 33 x 12.50/18 in. - 20 in. Back Spacing: 5 in.

2.5" FRONT LIFT COILS FITS 2WD 5.7L V8 HEMI MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2.5" FRONT LIFT COILS FITS 2WD 4.7L V8 MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2" FRONT LIFT COILS 2" LIFT COILS FITS ECODIESEL MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2.0" FRONT LIFT COILS WITH LIFT COILS INSTALLED, UPPER CONTROL ARM CAN MAKE CONTACT WITH COIL BUCKET AT FULL DROOP AND CAUSE A "BANG" SOUND. TO AVOID THIS, WE RECOMMEND ADDING OUR FORGED ALUMINUM UNIBALL UCA'S (PART# 852400) CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2.5" FRONT LIFT COILS WITH LIFT COILS INSTALLED, UPPER CONTROL ARM CAN MAKE CONTACT WITH COIL BUCKET AT FULL DROOP AND CAUSE A "BANG" SOUND. TO AVOID THIS, WE RECOMMEND ADDING OUR FORGED ALUMINUM UNIBALL UCA'S (PART# 852400) CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2.5" FRONT LIFT COILS WITH LIFT COILS INSTALLED, UPPER CONTROL ARM CAN MAKE CONTACT WITH COIL BUCKET AT FULL DROOP AND CAUSE A "BANG" SOUND. TO AVOID THIS, WE RECOMMEND ADDING OUR FORGED ALUMINUM UNIBALL UCA'S (PART# 852400) CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 702145 TO MAKE A COMPLETE 4.5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4.5" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 702145 TO MAKE A COMPLETE 7" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4" REAR LIFT KIT W/ MT SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 702145 TO MAKE A COMPLETE 6.5" VALUE LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Lift; w/Ball Joint Upper Control Arms

2.5" FRONT LIFT COILS W/ FOX SHOCKS CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIMS FENDER TRIMMING MAY BE REQUIRED DUE TO FOX SHOCKS BEING LONGER, UCA'S CAN MAKE CONTACT W/ COIL BUCKET WHEN SUSPENSION DROOPS OUT AND CAN MAKE NOISE MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2.5" FRONT LIFT COILS W/ FOX SHOCKS CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIMS FENDER TRIMMING MAY BE REQUIRED DUE TO FOX SHOCKS BEING LONGER, UCA'S CAN MAKE CONTACT W/ COIL BUCKET WHEN SUSPENSION DROOPS OUT AND CAN MAKE NOISE MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2.5" FRONT LIFT COILS W/ FOX SHOCKS CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9" WIDE RIMS FENDER TRIMMING MAY BE REQUIRED DUE TO FOX SHOCKS BEING LONGER, UCA'S CAN MAKE CONTACT W/ COIL BUCKET WHEN SUSPENSION DROOPS OUT AND CAN MAKE NOISE MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 702145 TO MAKE A COMPLETE 4.5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Lift; w/Ball Joint Upper Control Arms; Incl. SX8000 Shocks

4.5" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ OTHER COMPONENTS TO ACHIEVE EITHER 6.5" OR 7" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Suspension Lift Kit Wheel Drive: 4WD

4.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6.5" VALUE LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED KIT COMES WITH SPACERS AT ALL 4 CORNERS INSTEAD OF COIL SPRINGS GREAT VALUE!!! MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS 2WD V6 GAS MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS 2WD MODELS W/ 4.7L V8 MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS 2WD MODELS W/ 5.7L HEMI V8 MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Suspension Lift Kit With Superlift Shocks Wheel Drive: 4WD

With Superlift Rear Shocks 6 in. Suspension Lift Kit Wheel Drive: 4WD

.75 (in) - 2.5 (in) Lift

.75 (in) - 2.5 (in) Lift

6.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS 2WD V6 GAS MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Suspension Lift Kit With Bilstein Front Struts and Rear Shocks Wheel Drive: 4WD

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS 2WD MODELS W/ 5.7L HEMI V8 MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 5 3/4" BACKSPACING OR LESS CAN BE USED WITH STOCK 17" OR LARGER RIMS CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS 2WD MODELS W/ 4.7L V8 MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6 in. Suspension Lift Kit With Bilstein Front Struts and Rear Shocks Wheel Drive: 4WD

.75 (in) - 2.5 (in) Lift

.75 (in) - 2.5 (in) Lift

.75 (in) - 2.5 (in) Lift

6 in. Suspension Lift Kit With Fox Coilovers & Rear Shocks