Toyota 4Runner Suspension Leveling Kit Replacement

Max. Lift 2.5 in.; Max. Tire Diameter 32 in.

Black; 1 in. Lift; Front Easy Install Kit; For Tire Size 30 in.; Wheel Alignment Needed

Black; 1 in. Lift Easy Install Kit; Wheel Alignment Needed

2 in. Lift Excludes Models w/X-REAS Shocks

2 in. Lift TRD Pro Models Only

2.5 in.

2 in. Lift No Strut Disassembly Required

Black; 2.5 in. Lift; For Tire Size 32 in.; w/Bump Stops; Wheel Alignment Needed; Easy Install Kit For Tire Size 245/75/16

Black; 2.5 in. Lift

1.50 in. Lift

Black; 2.5 in. Lift; Easy Install Kit; Wheel Alignment Needed For Tire Size 32 in.

Does not fit factory air suspension

3 in. front lift 2 in. rear lift; Excludes TRD Pro models ; Front strut spacers; If installing this kit on a 2010 and newer 4 Runner, you will need the rear upper isolators from an FJ Cruiser - pn 48302-35040, or you will need to cut out the center of the existing isolators for proper fit of the rear spacers. ; Rear Coil Spacers

2.5"/1.25" LEVELING KIT CLEARS UP TO A 32" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED DOES NOT FIT MODELS WITH X-RAES OR KDSS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2.5"/1.25" LEVELING KIT CLEARS UP TO A 32" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED DOES NOT FIT MODELS WITH X-RAES OR KDSS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Lift

without Kinetic Dynamic, X-REAS Suspension Raises Front 2.5 (in) Must reuse OE Springs and Upper Mounting Components Levels Front Must use RS700080 coil spring spacer kit to make the rear of the vehicle level with the front of the vehicle. Includes RS9000XL Series Struts