Volkswagen Golf Transmission Clutch Kit Replacement

Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement. From 02/01/1990 From Chassis #1GL015952

Standard; Kit Only; O.D : 8 ;I.D : 13/16 ;TEETH : 24T To Chassis #1G-L-015951

Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement. Refer to LB180 regarding diagnosing chatter and slipping on vehicles with VW transmissions.

If replacing a Sachs clutch, all components must be replaced including the flywheel. LuK and Sachs components cannot be mixed. Refer to LB212 regarding replacement of Sachs version with LuK

200mm P/P & Disc

Standard; Kit Only; O.D : 8 1/4 ;I.D : 13/16 ;TEETH : 24T

Standard; (fr. ch. #1G-L-015952); Kit Only; O.D : 7 7/8 ;I.D : 13/16 ;TEETH : 24T

Diaphragm; 9 Inch Clutch Diameter; 28 Tooth Spline; 7/8 Inch Input Shaft Diameter

Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement. Refer to LB180 regarding diagnosing chatter and slipping on vehicles with VW transmissions.

Disc Size: 8 1/4 x 7/8 x 28

Standard; (fr. ch.#1H-R-038601); Kit Only; O.D : 8 1/4 ;I.D : 7/8 ;TEETH : 28T

Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement.

Standard; SACHS - Kit w/o DMF; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

210mm

8-1/4" Disc; 28 Spline

Diaphragm; For OE Dual Mass Flywheel System; 8 5/8 Inch Clutch Diameter; 28 Tooth Spline; 7/8 Inch Input Shaft Diameter

Diaphragm; For OE Dual Mass Flywheel System; 9 Inch Clutch Diameter; 28 Tooth Spline; 7/8 Inch Input Shaft Diameter

Standard; Kit Only; O.D : 8 3/4 ;I.D : 7/8 ;TEETH : 28T

Standard; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

8-1/4" Disc; 24 Spline

w/ Original Equipment Clutch

Diaphragm; For OE Dual Mass Flywheel System; 9 7/16 Inch Clutch Diameter; 23 Tooth Spline; 15/16 Inch Input Shaft Diameter Slave Cylinder Is Included With Release Bearing

210mm - w/o Bearing Dual 6mm Alignment Dowel Pins.

Slave Cylinder included Refer to LB163 regarding internal slave cylinders

Standard; Must Use w/SACHS DMF; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

Disc Size: 8 1/2 x 7/8 x 28

HEC Tech Disc Size: 9 1/8 x 7/8 x 28 Luk Type

Standard; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

9" Disc; 28 Spline

Standard; Kit w/o DMF; Kit Only; O.D : 8 7/8 ;I.D : 7/8 ;TEETH : 28T

Chas: -038600, 210mm Flywheel must be changed if vehicle is equipped with a LUK flywheel made in Mexico. Associated non-LUK flywheel 027 105 271P Pre-Dampened Disc 2 Locating Pin Pressure plate

Disc Size: 8 7/8 x 7/8 x 28

Flywheel included

w/ 228mm Flywheel

Standard; Kit w/ SACHS DMF; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

with 02J Transmission Code; Disc Size: 9 x 7/8 x 28 For Kit # 52255602 w/o Flywheel

Standard; Kit Only; O.D : 9 7/16 ;I.D : 7/8 ;TEETH : 28T

Standard; Kit includes Concentric Slave Cylinder.;Kit Only; O.D : 9 7/16 ;I.D : 15/16 ;TEETH : 23T

w/ 220mm Flywheel (Please note this Clutch Kit is only applicable to models that have not been updated with a 228mm Flywheel)

HEC Tech Disc Size: 9 x 7/8 x 28 Sachs Type

Standard; Kit w/ Solid Flywheel; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

Luk Dry Clutch

w/ Solid Flywheel Conversion Kit Installed (Vehicle has already had a Solid Flywheel Clutch Conversion installed)

w/ Original Equipment Clutch

Disc Size: 9 7/16 x 15/16 x 23 For Kit # 52405615 w/o Flywheel

w/ Original Equipment Clutch

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Sachs Dry Clutch

Sachs Dry Clutch

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

w/ Original Equipment Sachs Clutch & w/ 225mm Flywheel (Please note this Clutch Kit is only applicable to models that have been updated with a 225mm Flywheel)

w/ Original Equipment Clutch

Standard; LuK Kit; Kit includes Concentric Slave Cylinder.;Kit Only; O.D : 9 7/16 ;I.D : 15/16 ;TEETH : 23T

Sachs Version; 9" Disc; 28 Spline

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Solid Flywheel Conversion Kit

w/ Solid Flywheel Conversion Kit Installed (Vehicle has already had a Solid Flywheel Clutch Conversion installed)

w/ Originally Equipped with SACHS Clutch

Vendor: LUK

28-Spline; 257 Torque Capacity @Wheels

w/ Originally Equipped with LUK Clutch

28-Spline; 302 Torque Capacity @Wheels

Solid Flywheel Conversion Kit

Solid Flywheel Conversion Kit

Dual Mass Flywheel / Clutch Conversion - Kit contains: 240mm solid flywheel (1): pressure plate (1): clutch disc (1): Clutch Slave Cylinder - Release Bearing and flywheel mounting bolts. ***This solid flywheel replaces the OE dual mass flywheel***

w/ Solid Flywheel Conversion Kit Installed (Vehicle has already had a Solid Flywheel Clutch Conversion installed)

Solid Flywheel Conversion Kit

Solid Flywheel Conversion Kit