Volkswagen Jetta Transmission Clutch Kit Replacement

Refer to LB180 regarding diagnosing chatter and slipping on vehicles with VW transmissions. Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement.

Standard; Kit Only; O.D : 8 ;I.D : 13/16 ;TEETH : 24T

From Chassis #1GL015952 Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement. Refer to LB180 regarding diagnosing chatter and slipping on vehicles with VW transmissions.

If replacing a Sachs clutch, all components must be replaced including the flywheel. LuK and Sachs components cannot be mixed. Refer to LB212 regarding replacement of Sachs version with LuK

200mm P/P & Disc

Standard; Optional HD Kit for M480; Kit Only; O.D : 8 1/4 ;I.D : 13/16 ;TEETH : 24T

Standard; (fr. ch. #1G-L-015952); Kit Only; O.D : 7 7/8 ;I.D : 13/16 ;TEETH : 24T

Diaphragm; 9 Inch Clutch Diameter; 28 Tooth Spline; 7/8 Inch Input Shaft Diameter

Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement. Refer to LB180 regarding diagnosing chatter and slipping on vehicles with VW transmissions.

Disc Size: 8 1/4 x 7/8 x 28 To Chassis/VIN # 1HR038600

Standard; (fr. ch.#1H-R-038601); Kit Only; O.D : 8 1/4 ;I.D : 7/8 ;TEETH : 28T

Cycle clutch prior to start up to ensure circlip is fully seated under diaphragm spring tabs. Refer to LB134 regarding release bearing replacement.

9" Disc; 28 Spline

from Chassis # 1G-L-015 952; 7-7/8" Disc; 24 Spline

Standard; New Body Style, Kit for SACHS DMF; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

210mm

Standard; Old Body Style; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

8-1/4" Disc; 28 Spline

Diaphragm; For OE Dual Mass Flywheel System; 8 5/8 Inch Clutch Diameter; 28 Tooth Spline; 7/8 Inch Input Shaft Diameter

Diaphragm; For OE Dual Mass Flywheel System; 9 Inch Clutch Diameter; 28 Tooth Spline; 7/8 Inch Input Shaft Diameter

Standard; Kit Only; O.D : 8 3/4 ;I.D : 7/8 ;TEETH : 28T

Standard; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

8-1/4" Disc; 24 Spline

w/ Original Equipment Clutch

Diaphragm; For OE Dual Mass Flywheel System; 9 7/16 Inch Clutch Diameter; 23 Tooth Spline; 15/16 Inch Input Shaft Diameter Slave Cylinder Is Included With Release Bearing

9" Disc; 28 Spline

210mm - w/o Bearing Dual 6mm Alignment Dowel Pins.

Slave Cylinder included Refer to LB163 regarding internal slave cylinders

Standard; Must Use w/SACHS DMF; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

Disc Size: 8 1/2 x 7/8 x 28 IV

HEC Tech IV Disc Size: 9 1/8 x 7/8 x 28 Luk Type

Standard; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

Standard; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

9" Disc; 28 Spline

Standard; Kit w/o DMF; Kit Only; O.D : 8 7/8 ;I.D : 7/8 ;TEETH : 28T

Chas: -038600, 210mm Flywheel must be changed if vehicle is equipped with a LUK flywheel made in Mexico. Associated non-LUK flywheel 027 105 271P Pre-Dampened Disc 2 Locating Pin Pressure plate

IV Disc Size: 8 7/8 x 7/8 x 28

Flywheel included

w/ 228mm Flywheel

Standard; use with SACHS DMF; Kit includes Concentric Slave Cylinder.;Kit Only; O.D : 9 7/16 ;I.D : 15/16 ;TEETH : 23T

Standard; Optional Kit w/ DMF; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

Standard; SACHS Kit; Kit Only;Kit includes Concentric Slave Cylinder.; O.D : 9 7/16 ;I.D : 15/16 ;TEETH : 23T

with 02J Transmission Code; Disc Size: 9 x 7/8 x 28 For Kit # 52255602 w/o Flywheel

Standard; Kit Only; O.D : 9 7/16 ;I.D : 7/8 ;TEETH : 28T

Standard; Turbo; Kit Only; O.D : 9 7/8; I.D : 7/8; TEETH : 28T

Standard; Kit includes Concentric Slave Cylinder.;Kit Only; O.D : 9 7/16 ;I.D : 15/16 ;TEETH : 23T

w/ 220mm Flywheel (Please note this Clutch Kit is only applicable to models that have not been updated with a 228mm Flywheel)

Production: -11/30/2009, w/ Original Equipment Clutch & w/ Sachs Flywheel

Sachs Clutch LuK Clutch If replacing a Sachs clutch, all components must be replaced including the flywheel. LuK and Sachs components cannot be mixed. Refer to LB212 regarding replacement of Sachs version with LuK Includes Flywheel

HEC Tech IV Disc Size: 9 x 7/8 x 28 Sachs Type

Slave Cylinder included

Standard; Kit w/ Solid Flywheel; Kit Only; O.D : 9 ;I.D : 7/8 ;TEETH : 28T

LuK Clutch

w/ Solid Flywheel Conversion Kit Installed (Vehicle has already had a Solid Flywheel Clutch Conversion installed)

Standard; Kit Only; O.D : 9 7/8 ;I.D : 7/8 ;TEETH : 28T

w/ Original Equipment Clutch

Disc Size: 9 7/16 x 15/16 x 23 For Kit # 52405615 w/o Flywheel

Standard; Kit Only;Kit includes Concentric Slave Cylinder.; O.D : 9 7/16 ;I.D : 15/16 ;TEETH : 23T

w/ Original Equipment Clutch

Standard; Kit Only; O.D : 8 21/32 ;I.D : 7/8 ;TEETH : 28T

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Sachs Clutch

Sachs Clutch

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

w/ Original Equipment Sachs Clutch & w/ 225mm Flywheel (Please note this Clutch Kit is only applicable to models that have been updated with a 225mm Flywheel)

w/ Original Equipment Clutch & w/ Sachs Flywheel

w/ Original Equipment Clutch & w/ Sachs Flywheel

Standard; LuK Kit; Kit Only;Kit includes Concentric Slave Cylinder.; O.D : 9 7/16 ;I.D : 15/16 ;TEETH : 23T

Sachs Version; 9" Disc; 28 Spline

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Upgrade. Must use ACT or Corrado G60 flywheel (not included in kit).

Includes Slave Cylinder; 9-7/16" Disc; 23 Spline

Solid Flywheel Conversion Kit

w/ Solid Flywheel Conversion Kit Installed (Vehicle has already had a Solid Flywheel Clutch Conversion installed)

Standard; Kit includes Concentric Slave Cylinder.;Kit Only; O.D : 9 29/64 ;I.D : 61/64 ;TEETH : 23T

w/ Originally Equipped with SACHS Clutch

Includes: Pressure Plate, Clutch disc, Release Bearing, & Clutch Lever

w/ LUK Flywheel

28-Spline; 257 Torque Capacity @Wheels

w/ Originally Equipped with LUK Clutch

28-Spline; 302 Torque Capacity @Wheels

Solid Flywheel Conversion Kit

Solid Flywheel Conversion Kit

Dual Mass Flywheel / Clutch Conversion - Kit contains: 240mm solid flywheel (1): pressure plate (1): clutch disc (1): Clutch Slave Cylinder - Release Bearing and flywheel mounting bolts. ***This solid flywheel replaces the OE dual mass flywheel***

w/ Solid Flywheel Conversion Kit Installed (Vehicle has already had a Solid Flywheel Clutch Conversion installed)

Solid Flywheel Conversion Kit

Solid Flywheel Conversion Kit