1960 - 1976 Dodge Dart Engine Camshaft and Lifter Kit (Edelbrock) NEW

Off-Idle to 5500rpm Adv. Dur. at 0.050 Int/Exh. 204/204 Deg. Lift at Valve Int/Exh. 0.420 in. Lobe Seps 110 Deg. Intake Center Line 106 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Not For 1985 And Later Engines w/Roller Lifters~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 305 ft.-lbs When Matched w/2176 Intake and Stock Heads
Performer-Plus Camshaft Kit
Edelbrock part #2177 Performer-Plus camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 305 ft-lbs. of torque when used with #2176 intake and stock iron cylinder heads on a 318 engine. The camshaft will produce optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. This Performer-Plus is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. All camshafts include flat tappet lifters, assembly lube and instructions. Camshaft Specifications: - Duration @ .050 Intake: 204 degrees - Duration @ .050 Exhaust: 204 degrees - Lift @ Valve Intake: .420" - Lift @ Valve Exhaust: .420" - Lobe Separation: 110 Degrees - Intake Centerline: 106 Degrees - Idle Vacuum @ 1000 RPM's: 16
Brand: Edelbrock
Condition: New