Voice or type your vehicle details and Wrenchy will confirm fitment in seconds.
| Attribute | Value |
|---|---|
| Connector Gender | Female |
| Connector Quantity | 1 |
| Connector Shape | Rectangle |
| Contains Electronic Components | No |
| Does It Require SDS | No |
| FAA A1 | Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install. |
| FAA A2 | Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually. |
| FAA A3 | A Crescent Wrench Can Be Used For This Operation. |
| FAA A4 | The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position. |
| FAA A5 | This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer. |
| FAQ Q1 | The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing? |
| FAQ Q2 | Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High? |
| FAQ Q3 | What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor? |
| FAQ Q4 | What Drivetrain Position Is The Replacement Motor Drive Placed In? |
| FAQ Q5 | The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition? |
| FAQ Q6 | If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement. |
| Gear Of Chain Type | Gear |
| Grade Type | Performance |
| Is Item A Chemical | No |
| Is Or Contains A Battery | No |
| Is Or Contains A Bulb | No |
| Is Prop Sixty Five Affected | No |
| Is The Item CARB Affected | No |
| Mounting Hardware Included | No |
| Mounting Hole Quantity | 4 |
| Product Condition | Remanufactured |
| Shift Operation Type | Electronic |
| Sprocket Tooth Quantity | 13 |
| Terminal Gender | Male |
| Terminal Quantity | 5 |
| Terminal Type | Blade |
| Wiring Harness Included | No |
This part fits the following vehicles:
| SubmodelSUB- MODEL |
Body Style | Years | Engine | Attributes |
|---|---|---|---|---|
| Adventurer | SUV | 2006 - 2008 | V8 4.7L | RWD/4WD Automatic |
| Adventurer | SUV | 2006 - 2008 | V8 4.7L FLEX | RWD/4WD Automatic |
| Adventurer | SUV | 2006 - 2008 | V8 5.7L | RWD/4WD Automatic |
| Base | SUV | 2007 | V8 4.7L | RWD Automatic |
| Limited | SUV | 2007 | V8 4.7L | AWD Automatic |
| Limited | SUV | 2006 - 2009 | V8 4.7L FLEX | RWD/4WD Automatic |
| Limited | SUV | 2004 - 2008 | V8 4.7L | RWD/4WD Automatic |
| Limited | SUV | 2004 - 2009 | V8 5.7L | RWD/4WD Automatic |
| Limited | SUV | 2004 - 2006, 2008 | V8 5.7L | AWD Automatic |
| Limited Hybrid | SUV | 2009 | V8 5.7L FULL HYBRID EV-GAS (FHEV) | 4WD Automatic |
| SE | SUV | 2009 | V6 3.7L | RWD/4WD Automatic |
| SE | SUV | 2009 | V8 4.7L FLEX | RWD/4WD Automatic |
| SE | SUV | 2009 | V8 5.7L | RWD/4WD Automatic |
| SLT | SUV | 2006 - 2009 | V8 4.7L FLEX | RWD/4WD Automatic |
| SLT | SUV | 2004 - 2009 | V6 3.7L | RWD/4WD Automatic |
| SLT | SUV | 2004 - 2008 | V8 4.7L | RWD/4WD Automatic |
| SLT | SUV | 2004 - 2009 | V8 5.7L | RWD/4WD Automatic |
| SLT Plus | SUV | 2008 | V6 3.7L | 4WD Automatic |
| SLT Plus | SUV | 2008 | V8 4.7L | 4WD Automatic |
| SLT Plus | SUV | 2008 | V8 4.7L FLEX | 4WD Automatic |
| SLT Plus | SUV | 2008 | V8 5.7L | 4WD Automatic |
| ST | SUV | 2005 | V8 5.7L | RWD/4WD Automatic |
| ST | SUV | 2004 - 2005 | V6 3.7L | RWD/4WD Automatic |
| ST | SUV | 2004 - 2005 | V8 4.7L | RWD/4WD Automatic |
| SXT | SUV | 2007 | V8 5.7L | RWD/4WD Automatic |
| SXT | SUV | 2006 - 2008 | V8 4.7L FLEX | RWD/4WD Automatic |
| SXT | SUV | 2005 - 2008 | V6 3.7L | RWD/4WD Automatic |
| SXT | SUV | 2005 - 2008 | V8 4.7L | RWD/4WD Automatic |
We offer fast, reliable shipping on all orders:
We want you to be 100% satisfied with your purchase. That's why we offer:
This part comes with a limited lifetime warranty. Warranty begins on the original purchase date.
Warranty does NOT cover:
| Brand | Part Number |
|---|---|
| Chrysler | 5103275AA |
Fits Years: 2004 2005 2006 2007 2008 2009
Fits Models: Durango
In operation since 2007. Trusted by over a million DIYers, mechanics, and body shops across all 50 states.
If it doesn't fit, we make it right. No gimmicks, no fine print.
Most retailers stop at 30 days. We give you a full four months to install, test, and return for a 100% refund — return shipping on us.
Brand-new aftermarket parts from trusted suppliers — built to original-equipment specifications so they fit and function like the factory unit, at a fraction of the price.
Ask Wrenchy →