Voice or type your vehicle details and Wrenchy will confirm fitment in seconds.
| Attribute | Value |
|---|---|
| Bleeder Port Size | M8x1.25 |
| Brake Caliper Finish | Oil Emulsion |
| Caliper Color | Gray |
| FAQs | A Silicone Grease Is Used On Floating Caliper Mounting Pins., A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., Brakes Squeal All Of The Time. What's Causing The Squeal?, Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, Car Pulls To One Side During Braking. Why?, Could Calipers Be The Cause Of A Low Brake Pedal?, Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, What Type Of Grease Is Used On Floating Caliper Mounting Pins? |
| Features And Benefits | A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation., As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit., Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish., Mounting Bracket Is Included Where Applicable For A Hassle-free Installation., New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation., New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal., New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable., New Washers Are Included Where Applicable For A Proper Seal., Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%., Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads., Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance. |
| Inlet Port Size | M10x1.0 |
| Piston Material | Steel |
| Piston Size (OD) (in) | 2.125 |
| Piston Size (OD) (mm) | 53.975 |
| Product Condition | Remanufactured |
This part fits the following vehicles:
| SubmodelSUB- MODEL |
Body Style | Years | Engine | Attributes |
|---|---|---|---|---|
| Electric | Mini Cargo Van | 2011 - 2012 | -- -L BATTERY EV (EV/BEV) | FWD Automatic |
| Electric | Mini Passenger Van | 2011 - 2012 | -- -L BATTERY EV (EV/BEV) | FWD Automatic |
| XL | Mini Cargo Van | 2010 - 2013 | L4 2.0L | FWD Automatic |
| XL | Mini Passenger Van | 2010, 2012 | L4 2.0L | FWD Automatic |
| XLT | Mini Cargo Van | 2010 - 2013 | L4 2.0L | FWD Automatic |
| XLT | Mini Passenger Van | 2010 - 2013 | L4 2.0L | FWD Automatic |
| XLT Premium | Mini Passenger Van | 2011 - 2013 | L4 2.0L | FWD Automatic |
We offer fast, reliable shipping on all orders:
We want you to be 100% satisfied with your purchase. That's why we offer:
This part comes with a limited lifetime warranty. Warranty begins on the original purchase date.
Warranty does NOT cover:
Fits Years: 2010 2011 2012 2013
Fits Models: Transit Connect
In operation since 2007. Trusted by over a million DIYers, mechanics, and body shops across all 50 states.
If it doesn't fit, we make it right. No gimmicks, no fine print.
Most retailers stop at 30 days. We give you a full four months to install, test, and return for a 100% refund — return shipping on us.
Brand-new aftermarket parts from trusted suppliers — built to original-equipment specifications so they fit and function like the factory unit, at a fraction of the price.
Ask Wrenchy →