Disc Brake Caliper - Front Left (Cardone) for 2014-2023 INFINITI & Nissan NEW

Name: Disc Brake Caliper Cardone 19-B7146
Brand: Cardone
SKU: 0837DEF
Price: 155.75 USD
Availability: InStock
Rating: 4.9 (1451 reviews)

Price today

$155.75

YOUR NET COST

$95.45

after returning your old part

120-DayReturns

LifetimeWarranty

100%Money-Back

Product Notes Read before buying

Position: Front Left (Driver Side)
Installation Hardware Included with Metal Piston Supplied with Mounting Bracket
Remanufactured Brake Caliper
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Condition: New

See All Other Disc Brake Calipers

Not sure? Ask Wrenchy — Your Parts Assistant.

Voice or type your vehicle details and Wrenchy will confirm fitment in seconds.

Specifications & Info

Attribute	Value
Abutment Clips Included	Yes
Anti Rattle Spring Included	Yes
Bleeder Screw Cap Included	No
Bleeder Screw Included	Yes
Bleeder Screw Quantity	1
Bleeder Thread Size	M7x1.0
Bracket Included	Yes
Caliper Color	Gray
Caliper Finish	Oil Emulsion
Caliper Slides Included	Yes
Caliper Type	Floating
Casting Number	4547
Contains Electronic Components	No
Disc Brake Caliper Casting Material	Cast Iron
Does It Require SDS	No
Dust Boots Included	Yes
FAA A1	Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
FAA A2	As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
FAA A3	Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
FAA A4	Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
FAA A5	A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
FAA A6	A Silicone Grease Is Used On Floating Caliper Mounting Pins.
FAA A7	New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
FAQ Q1	Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
FAQ Q2	What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
FAQ Q3	Car Pulls To One Side During Braking. Why?
FAQ Q4	Brakes Squeal All Of The Time. What's Causing The Squeal?
FAQ Q5	Could Calipers Be The Cause Of A Low Brake Pedal?
FAQ Q6	What Type Of Grease Is Used On Floating Caliper Mounting Pins?
FAQ Q7	Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
Grade Type	Regular
Inlet Fitting Type	Banjo
Inlet Port Size	0.394, 10.00366
Inlet Thread Size	M10x1.0
Is Item A Chemical	No
Is Or Contains A Battery	No
Is Or Contains A Bulb	No
Is Prop Sixty Five Affected	No
Is The Item CARB Affected	No
Mounting Bolt Included	No
Mounting Hardware Included	Yes
Mounting Hole Diameter	0.551, 13.98989
Mounting Hole Thread Diameter	0.551, 13.98989
Mounting Hole Thread Size	M14 X 1.5
Pad Wear Sensor Included	No
Pads Included	No
Piston Diameter	1.746, 44.3484
Piston Material	Steel
Piston Quantity	2
Product Condition	Remanufactured
Rust Resistant Coating	Yes