Buy Ford Fusion Headlight Assembly

Here is a comprehensive guide to Ford Fusion headlights, covering replacement procedures, bulb specifications, common issues, and maintenance tips.

Headlight Replacement

Replacing the headlight assembly on a Ford Fusion typically requires removing the front bumper cover. This process involves detaching the lower splash shield, upper fender liner, and unbolting the bumper cover to access the headlight assembly. Once the assembly is exposed, disconnect the electrical connectors and remove the mounting bolts to replace the headlight. This procedure ensures proper alignment and functionality of the new headlight . (wagnerbrake.com)

Bulb Specifications

Ford Fusion models from 2006 to 2020 commonly use the following bulb types: (Boslla)

• High Beam: H7
• Low Beam: H11 (also compatible with H8 and H9)
• Fog Lights: H11 (H8 and H9 also fit)
• Turn Signal (Front): PW24W
• Reverse Light (Back-Up Light): T15 (912 or 921)
• License Plate Light: T10 (194 or 168) (AUXITO)

It's important to verify the specific bulb requirements for your Fusion's year and trim level to ensure compatibility . (Reddit)

Common Issues

Moisture in Headlight

A common problem is moisture accumulation inside the headlight lens, leading to fogging or condensation. This issue can be caused by a compromised seal or vent. To address this, inspect the headlight assembly for cracks or damaged seals and replace them as needed. (Wikipedia)

Headlight Not Turning On

If a headlight fails to illuminate, check the bulb first. If the bulb is intact, inspect the fuse associated with the headlight circuit. A blown fuse can prevent the headlight from operating and is relatively easy to replace .

Headlight Adjustment

Proper headlight alignment is crucial for optimal visibility and to avoid blinding other drivers. Ford recommends using a Phillips screwdriver to adjust the vertical aim of the headlamps. This adjustment can be done by turning the adjuster screw located near each headlamp assembly . (Ford Motor Company)

LED vs. Halogen Bulbs

While halogen bulbs are standard in many Ford Fusion models, some owners opt to upgrade to LED bulbs for improved brightness and energy efficiency. However, it's important to note that LED conversions may cause electrical issues due to the vehicle's wiring being designed for halogen bulbs . (Reddit, Reddit)

Headlight Restoration

Over time, headlight lenses can become cloudy or yellowed, reducing light output. Headlight restoration involves cleaning and polishing the lens to restore clarity. This process can improve nighttime visibility and is a cost-effective alternative to replacing the entire headlight assembly . (Wikipedia)

Q: How do I replace the headlight bulb on a 2013 Ford Fusion?
A: For the 2013 Ford Fusion, replacing the headlight bulb typically requires removing the front bumper cover to access the headlight assembly. Once exposed, disconnect the electrical connectors, remove the mounting bolts, and replace the bulb. Detailed instructions can be found in the vehicle's service manual or online repair guides. (DRiV | Quality Auto Parts)

Q: What should I do if my Ford Fusion headlight is foggy or cloudy?
A: If the headlight lens is foggy or cloudy, consider performing a headlight restoration. This process involves cleaning and polishing the lens to remove oxidation and restore clarity. Restoration kits are available and can be used at home.

Q: Can I install LED headlight bulbs in my Ford Fusion?
A: While it's possible to install LED bulbs, be aware that the Fusion's electrical system is designed for halogen bulbs. Installing LED bulbs may lead to compatibility issues or require additional modifications. It's advisable to consult with a professional before making the switch.

Q: How do I adjust the headlight alignment on my Ford Fusion?
A: To adjust the headlight alignment, locate the vertical adjuster screw near each headlamp assembly. Using a Phillips screwdriver, turn the screw to adjust the headlight's vertical aim. Ensure both headlights are properly aligned to avoid blinding other drivers. (Ford Motor Company)

Q: Why is my Ford Fusion headlight not turning on?
A: If a headlight isn't functioning, check the bulb for damage. If the bulb is intact, inspect the fuse associated with the headlight circuit. A blown fuse can prevent the headlight from operating and is relatively easy to replace.

Q: How can I prevent moisture from entering my Ford Fusion headlight?
A: To prevent moisture buildup, ensure the headlight assembly's seals are intact and free from cracks. If moisture persists, inspect the vents for blockages or damage and replace any faulty components.

For visual guidance on headlight replacement and adjustment, consider watching the following video: (YouTube)

How to Replace Headlights 2013-2020 Ford Fusion