Buy Mitsubishi Outlander Tail Light Assembly

Tail Light Overview

The tail light assembly on the Mitsubishi Outlander serves multiple functions, including brake lights, turn signals, and reverse lights. Over the years, the design and components have evolved, with newer models featuring LED technology for enhanced brightness and energy efficiency. Understanding the specific configuration and components of the tail light assembly is crucial for maintenance and replacement. (Mitsubishi Forum)

Common Bulb Types

Mitsubishi Outlander tail light assemblies typically utilize the following bulb types:

• 7440/7443: Commonly used for brake and tail lights.
• 1156/1157: Often found in earlier models for brake and turn signal functions.
• 2825: Used in some models for reverse lights. (JustAnswer, iFixit)

It's essential to verify the specific bulb type for your Outlander's model year and trim level to ensure compatibility.

Replacement Process

Q: How do I remove the tail light assembly on a 2013-2021 Mitsubishi Outlander?

A: To remove the tail light assembly: (Mitsubishi Forum)

1. Open the rear hatch.
2. Locate and remove the screws securing the tail light assembly.
3. Gently pull the assembly away from the vehicle to detach it.
4. Disconnect the wiring harness. (outlanderforums.com)

For a visual guide, refer to this tutorial: (YouTube).

Q: How do I replace a tail light bulb on a 2007-2013 Mitsubishi Outlander?

A: To replace the tail light bulb: (SEALIGHT)

1. Remove the tail light assembly as described above.
2. Twist and remove the bulb socket from the assembly.
3. Replace the old bulb with a new one of the same type.
4. Reinstall the socket into the assembly and reconnect the wiring harness.
5. Secure the assembly back onto the vehicle. (YouTube, JustAnswer, outlanderforums.com)

For detailed instructions, refer to this guide: (1A Auto).

Wiring Diagrams

For those interested in the electrical aspects, wiring diagrams for the Mitsubishi Outlander tail light assemblies can be found in the vehicle's service manual. These diagrams provide detailed information on the wiring connections and can assist in troubleshooting electrical issues. An example diagram for the 2017 model can be accessed here: (NHTSA).

Troubleshooting Tips

Q: What should I do if my tail light isn't working?

A: If your tail light isn't functioning: (Car Talk Community)

1. Check the bulb to see if it's burned out and replace it if necessary.
2. Inspect the fuse related to the tail light circuit and replace it if blown.
3. Examine the wiring for any visible damage or loose connections.
4. If the issue persists, consult a professional mechanic for further diagnosis.

Q: Can I upgrade to LED tail lights?

A: Upgrading to LED tail lights is possible and can offer benefits like increased brightness and energy efficiency. However, ensure that the LED bulbs are compatible with your vehicle's electrical system to prevent issues like hyper-flashing or error messages. Some users have reported challenges in swapping LED bulbs in rear tail light assemblies due to compatibility issues. (Reddit)(, Advance Auto Parts)

Maintenance Tips

• Regular Inspection: Periodically check the tail light assemblies for any signs of damage or moisture ingress.
• Cleaning: Clean the lenses with a mild detergent and soft cloth to maintain visibility.
• Sealing: Ensure that the seals around the tail light assemblies are intact to prevent water from entering.

Frequently Asked Questionss

Q: What are the common causes of tail light failure?

A: Common causes include burned-out bulbs, blown fuses, damaged wiring, or faulty connectors.

Q: How can I tell if my tail light bulb is burned out?

A: If the tail light isn't illuminating when the headlights are on, the bulb may be burned out. It's advisable to inspect and replace the bulb if necessary. (Car Talk Community)

Q: Are there any special tools required to replace the tail light assembly?

A: Typically, a Phillips head screwdriver is needed to remove the screws securing the assembly. No specialized tools are usually required.

Q: Can I replace the tail light assembly myself?

A: Yes, replacing the tail light assembly is a straightforward process that many vehicle owners can perform themselves with basic tools. (YouTube)

For more detailed information and visual guides, consider referring to the following resources:

• How to Replace a Tail Light on a 2013-2021 Mitsubishi Outlander
• 2011 Mitsubishi Outlander Bumper Taillight Replacement - iFixit
• 2016 Mitsubishi Outlander Sport Replacement Light Bulbs
• Mitsubishi Outlander Tail Light Mini Bulb - AutoZone.com (YouTube, YouTube, iFixit, LightBulbs.com, AutoZone.com)

These resources provide step-by-step instructions and additional information to assist with tail light maintenance and replacement.