Buy Nissan Murano Side View Mirrors

Quick Summary

The side-view mirror on every Nissan Murano-also called an outside mirror, door mirror or wing mirror-is a safety device that has grown from a simple piece of glass in 2003 to a camera-packed, heated, power-folding, memory-linked module on today's 2025 models. Modern Murano mirrors can defrost themselves, tilt down in reverse, flash turn-signal LEDs, host Blind-Spot Warning lamps and even carry one of the four cameras that create Nissan's "Intelligent Around View® Monitor" bird's-eye display. They must also follow U.S. Federal Motor Vehicle Safety Standard 111 rules about size, shape and field of view. Replacing or upgrading the assembly is a straightforward do-it-yourself job that requires only basic tools, but choosing the right unit means matching year-range, trim-level features and finish.

Generations

• 2003-2007 (Z50) - first Murano; manual-folding, power-adjust mirrors with optional heating.
• 2009-2014 (Z51) - larger housings, LED indicators added on some trims.
• 2015-2024 (Z52) - standard heating; available camera for Around View system.
• 2025-present (Z53) - redesigned mirror styling, still heated and camera-ready; pairs with new 9-speed drivetrain.

Key Features

• Heat & Defrost - a built-in grid melts ice when the rear-window/ mirror defroster is pressed. (Nissan USA)
• LED Turn Signals - standard from SV trim up; improve side visibility.
• Reverse Tilt-Down - mirrors dip automatically when R is selected, helping see curbs.
• Position Memory - linked to driver-seat presets and each Intelligent Key.
• Side Cameras - one wide-angle lens lives under each mirror to build the 360° Around View seen on the dash.
• Blind-Spot Lamps - small amber icons light up when radar detects a vehicle in the adjacent lane.

Fit Guide

← scroll table horizontally →

Always match paint code and feature set when ordering a replacement mirror assembly.

Safety & Law

• U.S. FMVSS 111 demands a flat (unit-magnification) driver-side mirror and sets minimum reflective size and secure mounting rules.
• NHTSA clarifies that a convex lens cannot replace the driver-side flat mirror on passenger cars.
• Passenger-side mirrors may be convex or flat if the interior mirror's view is blocked.
• Owners may add supplemental stick-on mirrors, but shops must not remove required equipment.

Installation Steps

1. Pry off door-panel switch trim and three hidden screws (10 mm).
2. Lift door panel enough to unplug the mirror harness.
3. Pop the interior sail cover and remove three 10 mm nuts holding the mirror.
4. Swap assemblies, route wiring through gasket, and tighten nuts to factory torque (about 7 N·m).
5. Reconnect harness, test adjustment, heat, signal and camera before reassembling the door.

A 2003-2007 video shows an identical process with basic hand tools.

Maintenance Tips

• Keep the lens area and heat-grid clear of ice scraper scratches.
• Use glass-safe cleaner; avoid ammonia that can haze mirror coatings.
• Cycle the defroster weekly in winter to keep elements working.
• If the mirror vibrates, snug the mounting nuts and check rubber gasket.

Troubleshooting

← scroll table horizontally →

Long-Tail Keywords

• 2011 Murano driver door mirror swap
• 2018 Murano heated wing mirror glass
• 2020 Murano blind-spot side-view mirror with camera
• 2005 Murano passenger door mirror removal
• 2023 Murano power folding mirror calibration

Frequently Asked Questions

Q: How can I tell if my Murano mirror is heated?
A: Look for a small defrost icon on the glass or press the rear-window defroster; heated mirrors activate through the same circuit.

Q: Do all Murano mirrors fold in?
A: Every year folds manually; power-folding became available on upper trims starting in 2015.

Q: What is the reverse tilt-down feature?
A: When you shift to R with the mirror switch set to L or R, both mirrors dip down so you can see the curb or parking lines, then return when you leave Reverse.

Q: Is blind-spot detection inside the mirror?
A: Yes-an amber icon embedded in the glass lights up if radar senses a vehicle in your blind spot.

Q: Can I fit a convex driver mirror for wider view?
A: No. FMVSS 111 requires a flat (unit-magnification) driver-side mirror on passenger cars. Convex lenses there are not legal in the U.S.

Q: Does replacing the assembly affect camera calibration?
A: No re-calibration is needed; the camera orientation is factory-set inside the mirror housing-just plug in the connector.

Q: Are 2003-2007 and 2009-2014 mirrors interchangeable?
A: No-the mounting studs match, but the wiring plugs and housing shapes differ between generations.

Q: How long does a DIY swap take?
A: Plan 30-45 minutes with basic screwdrivers and a 10 mm socket.

Q: Will memory settings remain after mirror replacement?
A: Yes-memory modules are in the vehicle, not the mirror. Once you reinstall, re-store your seat/mirror positions to each preset.

Q: What if my signal lamp flashes fast after replacement?
A: Check that the LED connector is fully seated; a loose plug raises bulb-out detection, causing rapid flashing.

Q: What paint code should I order?
A: The Murano paint code is on the driver-side door jamb label; match it for a correct color-cap mirror.

Q: Can I replace just the mirror glass?
A: Yes-heated or plain glass panels snap onto the rocker plate; be gentle to avoid breaking the motor tabs.

Q: How do I adjust mirrors to remove blind spots?
A: Angle each mirror outward until your own vehicle just leaves the view; this aligns with expert blind-spot reduction methods.

Q: Does the 2025 redesign change mounting?
A: The studs and wiring patterns carry over, so older accessories like tow-mirror slip-ons still fit.

Q: Are aftermarket mirror covers legal?
A: Cosmetic caps are fine as long as they don't block the reflective surface, LED, or camera view.