Buy Nissan Titan XD Tail Light Assembly

New Section:

Overview

The Nissan TITAN XD tail light-also called a rear lamp, taillamp, or brake-and-turn assembly-houses the stop, turn-signal, running-light, and backup functions at the back of the truck. All TITAN XD models (2016-2024) share the same basic "combination lamp" location on each bedside, though Nissan switched from mainly incandescent bulbs (2016-2019) to striking, frosted LED clusters on many 2020-up trims such as Pro-4X and Platinum Reserve. (Wikipedia, MotorTrend)

New Section:

Fit & Compatibility

• Fits U.S.-market TITAN XD Crew Cab and King Cab trucks built 2016-2024; the shape is the same left-to-right, but the wiring plugs differ between early halogen units (3157/3057 bulbs) and factory LED units. (SEALIGHT, LightBulbs.com)
• 2020 refresh kept the bed and box sheet-metal unchanged, so 2016-2019 housings bolt into later trucks and vice-versa. However, LED housings need the matching LED harness or a resistor adapter to avoid hyper-flash. (MotorTrend, Diode Dynamics)
• Each lamp is secured by two 10 mm bolts accessed with the tailgate lowered. (Titan XD Forum)

New Section:

Design Features

• Multi-chamber lens separates red stop/running light, amber or red turn signal (varies by market), clear reverse light, and optional white cargo/bed lamp. (Car and Driver, MotorTrend)
• LED versions use board-mounted diodes that illuminate 200 ms faster than filament bulbs, giving following drivers extra stopping distance. (MotorTrend)
• Housing is sealed with breathable vents to reduce fogging; if moisture appears, inspect the vent and rear gasket. (Titan XD Forum)

New Section:

Bulb & LED Options

← scroll table horizontally →

New Section:

Legal & Safety

• All rear lighting must meet the photometric and color limits in [FMVSS 108] to remain road-legal in the U.S. (eCFR)
• Nissan issued recall PC811 (2020-2021) to inspect front turn bulbs; although not tail-lamp-specific, it highlights the importance of correct bulb seating. (NHTSA)
• A Nissan service bulletin (NTB22-020) notes that a mis-adjusted stop-lamp switch can trigger ABS faults and disable trailer brake lights. (NHTSA)

New Section:

Common Symptoms

• One side dark: likely a burned-out 3157/3057 bulb or failed LED board.
• Fast flashing: bulb out or LED installed without load resistor.
• Water inside lens: vent clogged or gasket pinched; dry with silica packs and reseal.
• Remote start fails and tail lamps stay dark: check brake-switch alignment per Nissan bulletin. (NHTSA)

New Section:

DIY Replacement Steps

1. Lower tailgate and remove two 10 mm bolts. (Titan XD Forum)
2. Pull lamp straight rearward-plastic clips release with firm, even pressure.
3. Rotate bulb sockets counter-clockwise to remove; swap in new 3157 or 921 bulbs OR connect LED harness. (LightBulbs.com)
4. Test brake, turn, reverse, and running lights before reinstalling.
5. Align pins, press lamp flush, and torque bolts to 70 in-lb (hand snug). (Summit Racing)

New Section:

Upgrade Ideas

• LED plug-ins: 3157-type LED "tower" bulbs give a crisp on/off effect and draw less current. (Diode Dynamics)
• Smoked lenses: aftermarket housings offer darker styling; be sure lens tint still meets FMVSS brightness. (Autoblog)
• Sequential turn modules: add a sweeping signal effect without splicing factory wires.
• Bed-lighting integration: 2020-up lamps include a white cargo LED; older trucks can retrofit this function using OE-style pigtails. (MotorTrend)

New Section:

Maintenance Tips

• Clean lenses with mild car-wash soap-harsh chemicals can craze the polycarbonate.
• Apply dielectric grease to bulb bases to block corrosion, especially if you launch boats or drive salted winter roads.
• Check tail-lamp bolts at each oil change; vibration can loosen them over time.
• Inspect trailer-wiring connector; a short here often blows the same fuse that feeds the truck's tail lights. (YouTube)

New Section:

Buying Checklist

• Verify your build year and whether the truck left the factory with LED or incandescent lamps.
• Match the connector type-2016-2019 use a 4-pin, while LED lamps use a 6-pin plug.
• Confirm SAE /DOT markings molded into the lens to ensure street legality.
• For color-shifted or cracked lamps, replace the full assembly; replacing only bulbs will not restore lens clarity or reflectivity.

New Section:

Q: What years of TITAN XD share the same tail-lamp shape?
A: All model years 2016-2024 use the identical outer shell, so housings physically interchange. Electrical plugs differ between halogen and LED versions. (Wikipedia)

Q: Can I install LED bulbs in my 2016-2019 lamp?
A: Yes-direct-fit 3157 LED replacements slide into the factory socket. Add an inline 6-ohm resistor or an LED-safe flasher to prevent rapid blinking. (Diode Dynamics)

Q: Do the tail lights include the cargo-bed light?
A: On 2020-up trims, a white LED utility lamp is built into the outer edge. Earlier trucks lack this feature but can add it with a wiring harness from the later model. (MotorTrend)

Q: What fuse controls the tail lamps?
A: It is usually 10 A "TAIL" in the IPDM junction box under the hood; always check the lid diagram for your year. (Nissan Owners)

Q: Is it legal to tint or smoke the lenses?
A: Only if the finished lamp still meets FMVSS 108 brightness and color rules-most dark tints make the lamp non-compliant. (eCFR)

Q: My truck shows "bulb out" but all lamps work-why?
A: LED bulbs draw far less power; the truck's body control module may think the filament is open. Add load resistors or a BCM reflash. (SEALIGHT)

Q: How do I get rid of condensation inside the housing?
A: Remove the lamp, open the rear bulb holes, aim a hair dryer on low into the opening for 10 minutes, then check the vent for blockage before resealing. (Titan XD Forum)

Q: Does every TITAN XD lamp have amber turn signals?
A: U.S. models use red signals; export versions often switch to amber per local rules, but the physical housing remains the same. (Wikipedia)

By understanding fitment, bulb types, legal standards, and simple care steps, you can choose, install, and maintain a Nissan TITAN XD tail light that keeps your heavy-duty pickup both safe and sharp-looking on the road.