Buy Dodge Challenger Bumper Covers

• Fits every Challenger generation from 2008-2023, with small changes for wide-body, Hellcat, Redeye, and Scat Pack trims. The 2015-2023 front fascia with round fog lamps is the most common replacement request.
• Average weight is about 15-20 lb and it is molded from thermoplastic olefin (TPO) or polypropylene for flexibility and paint adhesion.
• The cover is cosmetic; the steel or aluminum beam behind it takes the crash energy.

• Deflects low-speed bumps and shields radiators, lights, and parking sensors.
• Directs airflow to brakes and intercoolers on performance trims. (MotorTrend)
• Serves as a mounting panel for adaptive cruise radar and ultrasonic park sensors; mis-alignment can disturb ADAS accuracy.

• Material: TPO/PP blend gives toughness in cold weather and resists most automotive chemicals.
• Typical thickness is 3-4 mm; ribs on the inside add stiffness without extra weight.
• Primed in gray or black for paint-to-match; texture is sanded smooth at the factory.

• 2008-2014 covers share one shape; 2015 refresh brought a slimmer grille and projector fog-lights; 2019+ wide-body variants flare 1.6 in. wider.
• Tabs, screw positions, and lamp pockets must match the trim (SXT, R/T, Scat Pack, Hellcat, etc.).
• Rear covers differ for dual-exhaust tip shapes on V-6 vs. V-8 models.

1. Unbolt the wheel-well screws and lower splash-shield clips.
2. Disconnect side-marker and fog-lamp wiring.
3. Slide the fascia forward off guide rails. A helper prevents scratches.
4. Reverse steps to install; torque fasteners evenly.

• U.S. FMVSS 581 sets the 2.5 mph pendulum impact test that the hidden beam-not the plastic skin-must pass.
• Radar waves can lose up to 10 % range if the cover is too thick or repainted with metallic flakes; calibrate sensors after any swap.

• Color-keyed covers, matte black "Demon" style, carbon-look wraps, and retro "Challenger 70" valance kits are popular mods.
• A chin splitter and air dam integrate into most aftermarket front skins for extra downforce.

• Wash with car-soap and water, then wipe with a VOC-compliant surface cleaner before waxing or painting.
• Keep sensor windows clear; a pushed-in park sensor causes constant beeping and needs valance removal to reseat.

← scroll table horizontally →

• Bumper covers are one of the largest plastic parts on a car and are often shredded for re-use as filler in new PP/TPO parts.
• Removing metal clips before recycling improves plastic purity and resale value.

Q: What is a bumper cover?
A: It's the thin plastic outer shell-also called a bumper skin or fascia-that snaps over the metal bumper beam.

Q: Does the cover affect crash safety?
A: The cover itself is cosmetic; the steel beam behind it absorbs the hit, but the skin must not interfere with sensor function.

Q: Which years share the same Challenger front fascia?
A: 2015-2023 narrow-body cars share most mounting points; 2008-2014 and 2019+ wide-body need different skins.

Q: Can I swap SXT and Hellcat covers?
A: Only if fog-lamp openings, brake-duct slots, and width match; otherwise brackets and lights won't line up.

Q: What tools do I need to remove it?
A: Trim-clip pliers, 8 mm socket, T-20 Torx driver, panel tool, and a friend to hold the piece.

Q: Will a wrap hurt my radar cruise?
A: Thick vinyl or metallic wraps can cut radar range; always recalibrate after wrapping.

Q: How do I fix a crack?
A: Plastic-weld the back, reinforce with ribbon rod, then sand and paint; full DIY videos show the steps.

Q: What paint should I use?
A: Urethane bumper paint with flex-additive sticks best to PP/TPO plastics.

Q: How do I clean bug residue?
A: Soak with warm soapy water, wipe gently; avoid harsh solvents that can cloud clearcoat.

Q: Can the cover be recycled?
A: Yes-remove metal clips and send the PP/TPO plastic to an automotive recycler that grinds it for new parts.

Q: Does the rear cover hide exhaust tips?
A: V-8 Challengers have cut-outs for dual rectangular tips; V-6 models use round outlets or hidden pipes.

Q: Why did my parking sensor fall inside the bumper?
A: The plastic clip can pop loose; remove the valance panel, snap the sensor back, and check the seal.

Q: Is sanding necessary before repainting a new primed cover?
A: Lightly scuff with 800-grit to remove shine, re-clean, then apply sealer and color.

Q: How do I tell if I need a wide-body bumper shell?
A: Measure overall width: wide-body covers flare about 1.6 in. wider at each wheel arch and use extra fender extensions.

Use this guide to choose, install, care for, or customize your Dodge Challenger bumper cover with confidence.