2003 - 2008 BMW Z4 Mirror Memory Control Module (OEM)

Before you buy a replacement mirror memory control module, consider these points:

• Check Compatibility: Even though this module fits many BMW and Mini models, double-check that it's the right one for your specific year and model.
• Inspect the Module: Look for any signs of damage, like cracks or corrosion.
• Ask About Testing: If buying a used module, ask if it has been tested to ensure it's working properly.

Quality indicators:

• OEM Markings: Original Equipment Manufacturer (OEM) parts will have the manufacturer's markings.
• Cleanliness: A clean module suggests it was stored properly.

What's included:

• Typically, you'll receive just the mirror memory control module itself.

Replacing the mirror memory control module is a moderately easy job.

• Difficulty: Medium
• Estimated Time: 30 minutes to 1 hour

Tools needed:

• Basic socket set
• Screwdrivers
• Trim removal tools (optional)

Critical steps:

1. Disconnect the negative battery cable.
2. Locate the mirror memory control module (usually under the dash or in the door).
3. Disconnect the wiring harness from the old module.
4. Remove the old module.
5. Install the new module.
6. Reconnect the wiring harness.
7. Reconnect the negative battery cable.

Tips:

• Take pictures of the wiring before disconnecting anything.
• Be gentle when removing trim pieces.

DIY or Professional?

• This is a job most DIYers can handle. If you're not comfortable working with electrical components, professional installation is recommended.

You have a couple of choices when buying a replacement mirror memory control module:

• Used OEM
• New Aftermarket

Used OEM:

• These are genuine factory parts taken from other vehicles.
• They are tested and inspected to ensure they are working.
• They offer excellent value because they are significantly cheaper than new parts.
• They are a great way to get a quality, reliable part at a lower price.

New Aftermarket:

• These are brand new parts made by third-party manufacturers.
• They are designed to meet or exceed the original equipment specifications.
• They offer a new part at a competitive price.

Both options can be good choices, depending on your budget and preferences.

When replacing the mirror memory control module, consider checking these related parts:

• Mirror adjustment switch: A faulty switch can cause similar symptoms.
• Mirror motors: If the mirrors aren't moving properly, the motors could be the problem.
• Wiring harness: Damaged wiring can prevent the module from working correctly.

Replacing these parts at the same time can prevent repeat failures and save you time and money in the long run.

A mirror memory control module typically lasts for 7-10 years or more.

Factors that affect longevity:

• Exposure to moisture or extreme temperatures.
• Electrical surges.
• The overall condition of the vehicle's electrical system.

Here's a general idea of the price ranges for mirror memory control modules:

• Budget: $50 - $100 (Used OEM)
• Mid-Range: $100 - $150 (New Aftermarket)
• Premium: N/A (No premium option available)

Labor costs for professional installation can range from $50 to $150, depending on the shop and your location.

Total job cost estimates:

• DIY (Used OEM): $50 - $100
• DIY (New Aftermarket): $100 - $150
• Professional Installation (Used OEM): $100 - $250
• Professional Installation (New Aftermarket): $150 - $300

Some BMW and Mini models are known to have issues with water intrusion affecting electrical components, including the mirror memory control module. Check for any signs of water damage in the area where the module is located. Also, some models have reported issues with the wiring harness connectors becoming loose or corroded.

After installing the new mirror memory control module:

1. Start the vehicle.
2. Adjust the mirrors to your desired positions.
3. Save the mirror positions using the memory buttons.
4. Move the mirrors out of position.
5. Press the memory buttons to recall the saved positions.

Verify that the mirrors move to the correct positions. Listen for any unusual noises from the mirror motors. If everything works as expected, the installation was successful.

Q: Will this module need to be programmed to my car?
A: In most cases, no. The module should work right away after installation. However, some models might require programming. Check your vehicle's repair manual for specific instructions.

Q: How do I know if the mirror switch or the module is bad?
A: If none of the mirror functions work, the switch is likely the problem. If some functions work, but the memory function doesn't, the module is more likely the issue.

Q: Can I just clean the old module to fix it?
A: Sometimes cleaning corroded connections can help, but if the module is damaged internally, cleaning won't fix it.

Q: Is it okay to buy a used module?
A: Yes, buying a used OEM module is a good way to save money and get a reliable part. Just make sure it has been tested and is in good condition.

Q: What if the new module doesn't fix the problem?
A: Double-check the wiring, the mirror switch, and the mirror motors. There may be another issue causing the problem.

OEM Part Numbers:

• BMW: 61356915061, 61359177975

Fits Years: 2003 2004 2005 2006 2007 2008