2002 - 2009 Chevrolet Trailblazer Fog Light - Right (Passenger) (OEM)

What to Look for When Buying This Part

• Check for cracks or damage to the lens.
• Inspect the housing for any signs of corrosion or wear.
• Make sure the mounting points are intact and not damaged.
• Verify that the electrical connector is in good condition.
• If buying used, ask about the part's history and condition.

Quality Indicators for the Available Options

What's Typically Included with the Part

• The fog light assembly (housing and lens)
• Sometimes a bulb (check the product description)
• Mounting hardware may or may not be included

Difficulty Level and Estimated Time

• Difficulty: Easy to Moderate
• Estimated Time: 30 minutes to 1 hour

Special Tools Needed (if any)

• Socket set
• Screwdriver set
• Pliers
• Possibly a trim removal tool

Critical Steps and Tips

1. Disconnect the negative battery cable to prevent electrical shock.
2. Remove the old fog light assembly. This usually involves removing screws or clips.
3. Disconnect the electrical connector from the old fog light.
4. Connect the electrical connector to the new fog light.
5. Install the new fog light assembly and secure it with screws or clips.
6. Reconnect the negative battery cable.
7. Test the fog light to make sure it's working properly.

Whether DIY is Recommended or Professional Installation is Better

• DIY is recommended for those with basic mechanical skills.
• If you're not comfortable working on your car's electrical system, professional installation is recommended.

Compare: Used OEM, Refurbished OEM, New Aftermarket

When replacing your fog light, you have several options: Used OEM, Refurbished OEM, and New Aftermarket. Each offers different benefits and drawbacks.

Used OEM

Used OEM fog lights are genuine factory parts that have been removed from another vehicle. They offer the best value because they are tested, inspected, and available at significantly lower prices than new parts. You get the quality and fit of an original part without the high cost.

Refurbished OEM

Refurbished OEM fog lights are also original factory parts, but they have been professionally restored. This means they have been inspected, cleaned, and repaired with new components as needed. Refurbished parts offer a good balance of quality and affordability.

New Aftermarket

New Aftermarket fog lights are brand new parts manufactured by third-party companies. These parts are designed to meet or exceed OE specifications. Aftermarket parts can be a good option if you're looking for a new part at a competitive price.

Parts Commonly Replaced or Checked at the Same Time

• Fog light bulbs
• Fog light switch
• Fog light relay
• Wiring harness

Why Replacing Related Parts Prevents Repeat Failures

Replacing related parts at the same time can help prevent repeat failures. For example, if the fog light switch is faulty, it could damage the new fog light. Replacing the switch along with the fog light can prevent this from happening. Similarly, corroded wiring can cause premature bulb burnout, so inspecting and repairing the wiring is important.

How Long This Part Normally Lasts

• A fog light can last for many years (5-10+) under normal conditions.

Factors that Affect Longevity

• Exposure to harsh weather conditions
• Road debris impacts
• Vibration
• Quality of the bulb
• Electrical system issues

Budget vs Mid-Range vs Premium Options

• Used OEM: $30 - $60
• Refurbished OEM: $50 - $80
• New Aftermarket: $40 - $90

Labor Cost Considerations if Applicable

• Labor costs for professional installation typically range from $50 to $150, depending on the shop and the complexity of the job.

Total Job Cost Estimates

• DIY: $30 - $90 (part only)
• Professional Installation: $80 - $240 (part + labor)

Known Issues for This Vehicle's System Related to This Part

• Some models have issues with moisture entering the fog light housing.
• Wiring corrosion is a common problem, especially in areas with road salt.
• The fog light switch can fail over time.

Any TSBs or Common Complaints

• Check online forums and technical service bulletins (TSBs) for any known issues or recalls related to the fog lights on your specific vehicle model.

How to Confirm Proper Operation

• Turn on the fog lights and make sure they illuminate properly.
• Check that the fog lights turn on and off with the fog light switch.
• Ensure the fog lights are securely mounted and do not vibrate excessively.

What to Look/Listen for to Verify It's Working Correctly

• Bright, steady light output
• No flickering or dimming
• No unusual noises from the fog light assembly
• Proper alignment of the light beam

FAQ

Q: How do I know if my fog light bulb is bad or if it's something else?
A: The easiest way to check is to replace the bulb with a new one. If the new bulb doesn't work, then the problem is likely with the wiring, switch, or relay.

Q: Are aftermarket fog lights as good as OEM fog lights?
A: Aftermarket fog lights can be a good option, but the quality can vary. Look for reputable brands and read reviews before making a purchase. OEM fog lights are generally more reliable and offer better fitment.

Q: Can I install a fog light myself, or do I need to take it to a mechanic?
A: If you have basic mechanical skills and are comfortable working on your car, you can likely install a fog light yourself. However, if you're not comfortable with electrical work, it's best to take it to a professional.

Q: What does "OEM" mean?
A: OEM stands for Original Equipment Manufacturer. It means the part is made by the same company that made the original part for your vehicle.

Q: How do I adjust my fog lights?
A: Fog light adjustment procedures vary by vehicle. Consult your owner's manual or a repair manual for instructions on how to properly adjust your fog lights.

OEM Part Numbers:

• Chevrolet: 15076246, 15175746
• Isuzu: 8150762460

Fits Years: 2002 2003 2004 2005 2006 2007 2008 2009