2021 - 2023 Chevrolet Trailblazer Black Alloy Wheel (OEM)

What to look for when buying a black alloy wheel:

• Correct Size: Make sure the wheel is the correct diameter, width, and bolt pattern for your Trailblazer.
• Offset: Verify the wheel offset is correct to ensure proper fitment and clearance.
• Finish: Check the finish for scratches, dents, or imperfections.
• Structural Integrity: Inspect for cracks, bends, or signs of repair.
• Warranty: See if the wheel comes with a warranty.

Quality indicators for available options:

What's typically included with the part:

• The alloy wheel itself.
• Center cap may or may not be included (check the product description).
• Lug nuts are typically NOT included.

Difficulty level and estimated time:

• Difficulty: Moderate
• Estimated Time: 30 minutes to 1 hour per wheel

Special tools needed:

• Lug wrench
• Jack
• Jack stands
• Torque wrench

Critical steps and tips:

1. Loosen Lug Nuts: Before lifting the vehicle, slightly loosen the lug nuts on the wheel you're removing.
2. Lift Vehicle: Use a jack to lift the vehicle and support it with jack stands.
3. Remove Wheel: Fully remove the lug nuts and take off the old wheel.
4. Install New Wheel: Mount the new wheel onto the hub and hand-tighten the lug nuts.
5. Lower Vehicle: Lower the vehicle and remove the jack stands.
6. Torque Lug Nuts: Use a torque wrench to tighten the lug nuts to the manufacturer's specified torque.
7. Re-torque: Re-torque the lug nuts after driving 50-100 miles.

DIY vs. professional installation:

• DIY is possible for those with experience changing tires.
• Professional installation is recommended if you're not comfortable working on your vehicle or don't have the necessary tools.

Compare: Used OEM, Refurbished OEM, New Aftermarket

• Used OEM: These are genuine factory wheels that have been previously used. They offer the best value as they are tested and inspected to ensure structural integrity and are available at significantly lower prices than new options. Expect minor cosmetic imperfections.
• Refurbished OEM: These are also original factory wheels that have been professionally restored. They are inspected, repaired, and refinished to like-new condition.
• New Aftermarket: These are brand new wheels manufactured by third-party companies. They are designed to meet or exceed original equipment specifications.

All three options can be a good choice depending on your budget and needs.

Parts commonly replaced or checked at the same time:

• Tires: If you're replacing a wheel, it's a good time to inspect your tires for wear and tear.
• Lug Nuts: Consider replacing worn or damaged lug nuts.
• Valve Stem: Replace the valve stem when replacing a wheel to prevent leaks.
• Brake Components: Check brake pads, rotors, and calipers for wear.

Why replacing related parts prevents repeat failures:

• Replacing worn tires ensures proper balance and reduces stress on the wheels.
• New lug nuts provide a secure connection and prevent wheel loosening.
• A new valve stem prevents air leaks and maintains proper tire pressure.
• Addressing brake issues prevents uneven wear and tear on the wheels.

How long this part normally lasts:

• Alloy wheels can last for the life of the vehicle with proper care.

Factors that affect longevity:

• Driving Conditions: Frequent exposure to potholes and rough roads can shorten lifespan.
• Maintenance: Regular cleaning and inspections can help prevent corrosion and damage.
• Climate: Salt and road chemicals in cold climates can accelerate corrosion.
• Accidents: Impacts and collisions can cause immediate damage.

Budget vs. mid-range vs. premium options:

• Used OEM: $75 - $150
• Refurbished OEM: $150 - $250
• New Aftermarket: $125 - $300+

Labor cost considerations:

• Professional wheel installation typically costs $50 - $100 per wheel.

Total job cost estimates:

• DIY: Cost of the wheel + any new tools or parts.
• Professional Installation: Cost of the wheel + labor costs.

Known issues for this vehicle's system related to this part:

• Some 2021-2025 Chevrolet Trailblazers have experienced issues with wheel corrosion, especially in areas with harsh winters.
• Check for any recalls or service bulletins related to wheel issues on your specific model year.

Any TSBs or common complaints:

• Consult the National Highway Traffic Safety Administration (NHTSA) website for any Technical Service Bulletins (TSBs) or complaints related to wheels on the 2021-2025 Chevrolet Trailblazer.

How to confirm proper operation:

• Visual Inspection: Make sure the wheel is properly seated and the lug nuts are tightened.
• Test Drive: Drive the vehicle at various speeds to check for vibrations or unusual noises.

What to look/listen for to verify it's working correctly:

• No vibrations in the steering wheel or seat.
• No unusual noises coming from the wheel area.
• Proper tire pressure.
• Even tire wear.

Q: Will this wheel fit my 2023 Chevrolet Trailblazer?
A: This wheel is designed to fit 2021-2025 Chevrolet Trailblazer models. However, it's always best to verify the wheel specifications (size, offset, bolt pattern) to ensure proper fitment for your specific vehicle.

Q: Does this wheel come with a tire?
A: No, this listing is for the alloy wheel only. Tires are sold separately.

Q: Are lug nuts included with the wheel?
A: Lug nuts are typically not included. You can reuse your existing lug nuts if they are in good condition.

Q: What is the difference between a used OEM wheel and a refurbished OEM wheel?
A: A used OEM wheel is a genuine factory wheel that has been previously used and inspected. A refurbished OEM wheel is also a genuine factory wheel that has been professionally restored to like-new condition.

Q: How do I know if my wheel is bent or damaged?
A: Look for visible bends, cracks, or dents in the wheel. You may also experience vibrations or unusual noises while driving. A tire shop can perform a wheel runout test to determine if the wheel is bent.

OEM Part Numbers:

• Chevrolet: 42340578, 42506149

Fits Years: 2021 2022 2023