2021 - 2025 Chevrolet Trailblazer Silver Alloy Wheel (OEM)

When buying a black alloy wheel, look for:

• Material: Ensure the wheel is made from high-quality aluminum alloy for strength and durability.
• Finish: Check that the black finish is even, smooth, and resistant to chipping or peeling.
• Construction: Look for a well-constructed wheel with strong welds and a solid design.
• Certifications: See if the wheel meets industry standards for safety and performance.

Quality indicators:

• Reputable Brand: Choose a wheel from a well-known and trusted manufacturer.
• Positive Reviews: Read online reviews to see what other customers have experienced with the wheel.
• Warranty: A good warranty indicates the manufacturer's confidence in the product.
• Proper Markings: The wheel should have clear markings indicating its size, load capacity, and other important information.

Typically included with the part:

• The black alloy wheel itself.
• Sometimes, a center cap is included, but this may need to be purchased separately.
• Lug nuts are usually NOT included and must be purchased separately.

The difficulty level for installing a wheel is generally considered Easy.

Estimated time: 30 minutes to 1 hour per wheel.

Special tools needed:

• Lug wrench: To remove and tighten lug nuts.
• Torque wrench: To tighten lug nuts to the correct specification.
• Jack: To lift the vehicle.
• Jack stands: To safely support the vehicle.

Critical steps and tips:

1. Loosen Lug Nuts: Before lifting the vehicle, loosen the lug nuts on the wheel you're removing.
2. Lift Vehicle: Use a jack to lift the vehicle and support it with jack stands.
3. Remove Wheel: Fully remove the lug nuts and take off the old wheel.
4. Install New Wheel: Mount the new wheel onto the hub and hand-tighten the lug nuts.
5. Lower Vehicle: Lower the vehicle back to the ground.
6. Torque Lug Nuts: Use a torque wrench to tighten the lug nuts to the manufacturer's specified torque in a star pattern.

DIY is generally recommended for this task if you have basic mechanical skills and the necessary tools. However, if you're not comfortable performing the installation yourself, professional installation is always a good option.

Here's a comparison of different buying options for your black alloy wheel:

| Feature | Used OEM the wheel is damaged.

• Vibration: If the vibration disappears after rotating the tires, the wheel is likely the issue.

Parts commonly replaced or checked at the same time:

• Tires: If a wheel is damaged, the tire may also be damaged or worn unevenly.
• Lug Nuts: Damaged or corroded lug nuts should be replaced to ensure proper wheel attachment.
• Wheel Bearings: A damaged wheel can put extra stress on the wheel bearings, causing them to wear out faster.
• Suspension Components: Damage to a wheel from impact can also affect suspension parts like ball joints, tie rod ends, and struts.

Replacing related parts can prevent repeat failures by addressing the root cause of the problem. For example, if a damaged wheel bearing caused the wheel to wobble, replacing only the wheel won't solve the underlying issue.

A black alloy wheel can last for the life of the vehicle under normal driving conditions.

Factors that affect longevity:

• Driving Habits: Aggressive driving, such as hitting potholes and curbs, can shorten the lifespan of a wheel.
• Road Conditions: Driving on rough or poorly maintained roads can increase the risk of wheel damage.
• Climate: Exposure to salt and road chemicals in colder climates can accelerate corrosion.
• Maintenance: Regularly cleaning and inspecting the wheels can help prevent damage and extend their lifespan.
• Load: Overloading the vehicle can put excessive stress on the wheels.

• Budget: Used OEM wheels can range from $75 - $150.
• Mid-Range: Refurbished OEM wheels typically cost $150 - $250.
• Premium: New Aftermarket wheels range from $200 - $400.

Labor cost for wheel installation is typically $50 - $100 per wheel, depending on the shop and location.

Total job cost estimates:

• DIY: $75 - $400 (depending on the wheel type) + cost of tools if needed.
• Professional Installation: $125 - $500 (depending on the wheel type and labor rate).

Some 2021-2025 Buick Envista, Chevrolet Trailblazer, and Trax models have experienced issues with wheel corrosion, particularly in areas with harsh winter weather and road salt use. Regularly cleaning the wheels and applying a protective coating can help prevent corrosion. There are no widespread TSBs (Technical Service Bulletins) specifically addressing wheel issues for these vehicles, but checking for any recalls related to wheel integrity is always recommended. Some owners have reported premature tire wear due to alignment issues that can be exacerbated by damaged wheels.

To confirm proper operation after installing a new wheel:

• Visual Inspection: Double-check that the wheel is properly seated on the hub and that the lug nuts are tightened to the correct torque.
• Test Drive: Take the vehicle for a short test drive at varying speeds.
• Listen for Noises: Pay attention to any unusual noises, such as clicking, grinding, or wobbling sounds.
• Check for Vibration: Ensure that there is no vibration in the steering wheel or seat.
• Tire Pressure Monitoring System (TPMS): If your vehicle has TPMS, make sure it is functioning correctly and displaying accurate tire pressure readings.

What to look/listen for:

• Smooth Ride: The ride should be smooth and comfortable, without any noticeable vibrations.
• No Unusual Noises: There should be no clicking, grinding, or wobbling sounds coming from the wheel area.
• Proper Handling: The vehicle should handle properly, without pulling to one side or feeling unstable.

Q: How do I know if my wheel is bent or damaged?
A: Look for visual signs like dents, cracks, or bends in the rim. You might also feel a vibration while driving, especially at higher speeds. A tire shop can also check the wheel's balance and runout.

Q: Can I drive with a slightly bent wheel?
A: It's not recommended. Even a slight bend can cause vibrations, uneven tire wear, and potentially lead to a tire blowout. It's best to replace a damaged wheel as soon as possible.

Q: Are used OEM wheels safe to buy?
A: Yes, used OEM wheels can be a good option if they are inspected and tested to ensure they are structurally sound. Make sure to buy from a reputable source that offers a warranty or return policy.

Q: Will this wheel fit my 2023 Chevrolet Trailblazer?
A: This wheel fits 2021-2025 Buick and Chevrolet Envista, Trailblazer, and Trax models. Verify that your specific vehicle year and model are included in the fitment information before purchasing.

Q: Do I need to buy new lug nuts when I replace my wheel?
A: It's generally a good idea to inspect your lug nuts and replace them if they are damaged, corroded, or stripped. Using new lug nuts can help ensure proper wheel attachment and prevent future problems.

OEM Part Numbers:

• Buick: 42679297, 60002022, 60006716

Fits Years: 2021 2022 2023 2024 2025