2024 - 2025 Chevrolet Trailblazer Black Alloy Wheel (OEM)

What to Look for When Buying This Part

• Check for structural damage, such as cracks, bends, or welds.
• Inspect the finish for scratches, chips, or corrosion.
• Ensure the wheel is the correct size and offset for your vehicle.
• Verify that the wheel has the correct bolt pattern for your vehicle.
• Confirm that the wheel is compatible with your vehicle's tire pressure monitoring system (TPMS).

Quality Indicators for the Available Options

What's Typically Included with the Part

• The alloy wheel itself.
• Center cap is sometimes included, but not always.
• Lug nuts are typically not included.
• Tire pressure monitoring system (TPMS) sensor is typically not included.

Difficulty Level and Estimated Time

• Difficulty: Easy to Moderate
• Estimated Time: 30 minutes to 1 hour per wheel

Special Tools Needed (If Any)

• Lug wrench
• Jack
• Jack stands
• Torque wrench

Critical Steps and Tips

1. Loosen Lug Nuts: Before lifting the vehicle, loosen the lug nuts on the wheel you're removing.
2. Lift the Vehicle: Use a jack to lift the vehicle and support it with jack stands.
3. Remove the Wheel: Fully unscrew the lug nuts and remove the wheel.
4. Install the New Wheel: Mount the new wheel onto the hub and hand-tighten the lug nuts.
5. Lower the Vehicle: Lower the vehicle to the ground and remove the jack stands.
6. Torque Lug Nuts: Use a torque wrench to tighten the lug nuts to the manufacturer's specified torque. Tighten in a star pattern.
7. Re-Check Torque: Re-check the lug nut torque after driving a short distance (50-100 miles).

Whether DIY is Recommended or Professional Installation is Better

• DIY is possible for those with basic mechanical skills and tools.
• Professional installation is recommended if you're not comfortable working on your vehicle or don't have the necessary tools.

Compare: Used OEM, Refurbished OEM, New Aftermarket

• All three options can be good choices, depending on your budget and needs.

Used OEM

• Best value for genuine factory parts.
• Tested and inspected to ensure they meet quality standards.
• Significantly lower prices than new parts.
• May have minor cosmetic imperfections.

Refurbished OEM

• Factory parts that have been professionally restored.
• May include new components to ensure optimal performance.
• Cosmetically restored to like-new condition.
• A good balance of quality and price.

New Aftermarket

• Brand new third-party parts.
• Built to meet or exceed OE specifications.
• Can be a more affordable alternative to new OEM parts.
• Quality can vary depending on the manufacturer.

Parts Commonly Replaced or Checked at the Same Time

• Tires
• Lug nuts
• Tire pressure monitoring system (TPMS) sensors
• Wheel bearings
• Brake rotors and pads
• Suspension components (struts, shocks, ball joints)

Why Replacing Related Parts Prevents Repeat Failures

• Replacing worn tires or faulty TPMS sensors at the same time as the wheel ensures proper wheel balance and tire pressure monitoring.
• Checking wheel bearings and suspension components can identify potential issues that could damage the new wheel.
• Addressing brake issues can prevent uneven wear on the new wheel and tire.

How Long This Part Normally Lasts

• Alloy wheels can last for the life of the vehicle with proper care.

Factors That Affect Longevity

• Driving conditions (potholes, rough roads)
• Climate (road salt, extreme temperatures)
• Maintenance (proper tire inflation, wheel balancing)
• Driving habits (aggressive driving, curb impacts)

Budget vs Mid-Range vs Premium Options

• Used OEM: $75 - $150
• Refurbished OEM: $150 - $250
• New Aftermarket: $125 - $300+

Labor Cost Considerations if Applicable

• Professional installation typically costs $50-$150 per wheel, depending on the shop and location.

Total Job Cost Estimates

• DIY: Cost of the wheel only.
• Professional Installation: Cost of the wheel + $50-$150 per wheel for labor.

Known Issues for This Vehicle's System Related to This Part

• Some 2024-2026 Chevrolet Trailblazer models have been reported to have issues with wheel alignment, which can lead to uneven tire wear and premature wheel failure. It's important to ensure proper alignment after installing a new wheel.
• Check for any Technical Service Bulletins (TSBs) related to wheel or tire issues on this vehicle.

How to Confirm Proper Operation

• Check for vibrations or unusual noises while driving.
• Ensure the vehicle tracks straight and doesn't pull to one side.
• Verify that the tire pressure monitoring system (TPMS) is working correctly.
• Visually inspect the wheel and tire for any signs of rubbing or interference.

What to Look/Listen for to Verify It's Working Correctly

• Smooth, vibration-free ride.
• No unusual noises, such as humming or roaring.
• Even tire wear.
• Proper TPMS readings.

Q: Will this wheel fit my 2025 Chevrolet Trailblazer?
A: This wheel is designed to fit 2024-2026 Chevrolet Trailblazer models. However, it's always best to double-check the specifications to ensure compatibility with your specific vehicle.

Q: Does this wheel come with a tire?
A: No, this listing is for the alloy wheel only. Tires are sold separately.

Q: Does this wheel come with a center cap?
A: Center caps are sometimes included, but not always. Please check the product description carefully to see if a center cap is included.

Q: Do I need to get the wheel balanced after installation?
A: Yes, it's always recommended to have the wheel balanced after installation to ensure a smooth and vibration-free ride.

Q: What is the warranty on this wheel?
A: The warranty varies depending on whether you choose a used OEM, refurbished OEM, or new aftermarket wheel, and also depends on the specific seller. Please check the seller's warranty information before purchasing.

OEM Part Numbers:

• Chevrolet: 42800021, 42800490
• Other: GM 42800021

Fits Years: 2024 2025