OEM Airbag Control Module for 1997-2005 Cadillac, Chevrolet, GMC, Isuzu, & Oldsmobile

What to look for when buying this part:

• Make sure the part is specifically for your car's year, make, and model.
• Check that the part is in good condition, with no visible damage or corrosion.
• Confirm the part has been tested and is working properly.
• Buy from a reputable seller with a good return policy.

Quality indicators for the available options:

What's typically included with the part:

• The airbag control module itself.
• Sometimes, mounting hardware (screws or bolts).
• Possibly, installation instructions (though often not included).

Difficulty level and estimated time:

• Medium difficulty.
• Estimated time: 1-2 hours.

Special tools needed (if any):

• Socket set
• Screwdrivers
• OBD II scanner to clear error codes
• Multimeter (optional, for testing wiring)

Critical steps and tips:

1. Disconnect the car's battery before starting. This is very important for safety!
2. Locate the airbag control module (usually under the center console or under the seats).
3. Disconnect the wiring harness from the module.
4. Remove the old module.
5. Install the new module and reconnect the wiring harness.
6. Reconnect the car's battery.
7. Use an OBD II scanner to clear any airbag system error codes.

Whether DIY is recommended or professional installation is better:

• DIY is possible if you have some mechanical experience and are comfortable working with electrical systems.
• Professional installation is recommended if you're not comfortable working with electrical systems or if you want to ensure the job is done correctly. Airbag systems are sensitive and can be dangerous if not handled properly.

Compare: Used OEM, New Aftermarket

Used OEM:

• Best value for a genuine factory part.
• Tested and inspected to ensure it's working.
• Significantly lower price than new options.

New Aftermarket:

• Brand new part from a third-party manufacturer.
• Built to meet or exceed original equipment specifications.
• Good option if you prefer a new part.

Parts commonly replaced or checked at the same time:

• Clock spring (located in the steering wheel)
• Airbag sensors (located throughout the car)
• Wiring harness connectors
• Seat belt pre-tensioners

Why replacing related parts prevents repeat failures:

• Replacing related parts can address underlying issues that caused the original module to fail.
• Faulty sensors or wiring can damage the new module if they're not fixed.
• Replacing worn parts ensures the entire airbag system is functioning correctly.

How long this part normally lasts:

• An airbag control module can last for the life of the car under normal conditions.
• However, factors like accidents, water damage, and electrical issues can shorten its lifespan.

Factors that affect longevity:

• Exposure to moisture or extreme temperatures.
• Electrical surges or shorts in the car's electrical system.
• Physical damage from accidents.
• The overall condition of the car's electrical system.
• Proper maintenance and care of the car.

Budget vs mid-range vs premium options:

• Used OEM: $50 - $150
• New Aftermarket: $100 - $300

Labor cost considerations if applicable:

• Professional installation: $100 - $300 (depending on the shop and location)

Total job cost estimates:

• DIY (Used OEM): $50 - $150 (part only)
• DIY (New Aftermarket): $100 - $300 (part only)
• Professional Installation (Used OEM): $150 - $450 (part and labor)
• Professional Installation (New Aftermarket): $200 - $600 (part and labor)

Known issues for this vehicle's system related to this part:

• Some models have issues with corrosion in the wiring harness connectors.
• Check for any recalls related to the airbag system on your specific vehicle.

Any TSBs or common complaints:

• Check with the National Highway Traffic Safety Administration (NHTSA) for any Technical Service Bulletins (TSBs) or recalls related to the airbag system on your car.

How to confirm proper operation:

• Start the car and make sure the airbag warning light turns on briefly and then turns off.
• Use an OBD II scanner to check for any new error codes related to the airbag system.

What to look/listen for to verify it's working correctly:

• The airbag warning light should not stay on or flash after starting the car.
• If the airbag warning light comes on while driving, there's still a problem.
• Have a professional perform a diagnostic test to ensure the system is working correctly.

Q: Will this airbag control module need to be programmed?
A: It depends. Some modules may need to be programmed to your specific vehicle's VIN. Check with a mechanic or the seller to confirm if programming is required.

Q: What happens if I install the module incorrectly?
A: Installing the module incorrectly can cause the airbag system to malfunction or not work at all. It can also be dangerous. It's best to have a professional install it if you're not comfortable doing it yourself.

Q: How do I know if the used OEM module is still good?
A: Buy from a reputable seller who tests and inspects their parts. Ask about their warranty or return policy.

Q: Can I reset the airbag light myself after installing this module?
A: Yes, you can usually reset the airbag light using an OBD II scanner that can read and clear airbag system codes.

Q: What if the new module doesn't fix the problem?
A: If the new module doesn't fix the problem, there may be other issues with the airbag system, such as faulty sensors, wiring problems, or a defective clock spring. Have a professional diagnose the system to find the root cause of the problem.

OEM Part Numbers:

• GM: 09366420, 16238326, 16238362, 16238890, 16245102, 9366420

Fits Years: 1997 1998 1999 2000 2001 2002 2003 2004 2005