OEM Airbag Control Module for 2016-2024 Buick, Cadillac, Chevrolet, & GMC

What to Look for When Buying This Part

• Check the part's condition: Look for any signs of damage or wear.
• Verify compatibility: Make sure the part is the correct one for your vehicle's year, make, and model.
• Check warranty: A warranty can protect you if the part fails soon after installation.
• Buy from a reputable source: Choose a seller with good reviews and a clear return policy.

Quality Indicators for the Available Options

| Feature | Used OEM more reliable, genuine factory part, tested and inspected | New Aftermarket -------------------------------- the airbag system.

Difficulty Level and Estimated Time

• Difficulty: Moderate
• Estimated time: 1-2 hours

Special Tools Needed (if any)

• Socket set
• Screwdrivers
• Diagnostic scan tool (recommended)

Critical Steps and Tips

1. Disconnect the battery: This is crucial to prevent accidental airbag deployment.
2. Locate the module: Usually under the center console or seat. Consult your vehicle's repair manual.
3. Remove the old module: Disconnect the wiring harness and remove the mounting bolts.
4. Install the new module: Connect the wiring harness and secure the module with the mounting bolts.
5. Reconnect the battery.
6. Clear any error codes: Use a diagnostic scan tool to clear any codes related to the airbag system.

Whether DIY is Recommended or Professional Installation is Better

• DIY is possible for mechanically inclined individuals with experience working on cars. However, due to the safety-critical nature of the airbag system, professional installation is highly recommended.

Compare: Used OEM, New Aftermarket

| Feature | Used OEM The airbag system is a safety-critical component. It's important to choose a replacement part that you can rely on.

Used OEM

• Best value: Offers a balance of reliability and affordability.
• Genuine factory parts: Ensures proper fit and function.
• Tested and inspected: Gives you confidence in the part's condition.
• Significantly lower prices: Saves you money compared to new parts.

New Aftermarket

• Brand new: Provides peace of mind knowing the part hasn't been used before.
• Built to OE specs: Designed to meet the original manufacturer's standards.
• Wide availability: Easy to find and purchase.

Parts Commonly Replaced or Checked at the Same Time

• Crash sensors: These sensors detect impacts and trigger airbag deployment.
• Clock spring: This component allows the steering wheel to turn while maintaining electrical connections to the airbag.
• Seatbelt pretensioners: These devices tighten the seatbelts in an accident.
• Airbags: Inspect for damage or signs of deployment.

Why Replacing Related Parts Prevents Repeat Failures

• Replacing worn or damaged related parts can help prevent future problems with the airbag system. For example, a faulty crash sensor could cause the airbag control module to malfunction. Replacing both parts at the same time can ensure the system functions properly.

How Long This Part Normally Lasts

• The airbag control module is designed to last the lifetime of the vehicle.

Factors that Affect Longevity

• Environmental conditions: Exposure to extreme temperatures, moisture, and corrosion can shorten the lifespan of the module.
• Accidents: A severe accident can damage the module.
• Electrical problems: Surges or shorts can damage the module's internal components.

Budget vs Mid-Range vs Premium Options

• Used OEM: $50 - $200
• New Aftermarket: $100 - $300

Labor Cost Considerations if Applicable

• Labor costs for installation can range from $100 to $300, depending on the shop and the complexity of the job.

Total Job Cost Estimates

• Used OEM: $150 - $500 (part + labor)
• New Aftermarket: $200 - $600 (part + labor)

Known Issues for This Vehicle's System Related to This Part

• Some models have reported issues with false airbag deployment due to faulty crash sensors.
• Corrosion in the wiring harness can cause intermittent airbag system malfunctions.

Any TSBs or Common Complaints

• Check for any Technical Service Bulletins (TSBs) related to the airbag system on your specific vehicle model. These bulletins can provide information about common problems and recommended solutions.

How to Confirm Proper Operation

• Check the airbag warning light: The airbag warning light should turn off after the new module is installed and the system is reset.
• Perform a diagnostic scan: Use a scan tool to check for any error codes.
• Test the system: Some shops can perform a simulated crash test to verify the airbag system is functioning correctly.

What to Look/Listen for to Verify It's Working Correctly

• No airbag warning light illuminated on the dashboard.
• No error codes related to the airbag system.
• Proper operation of other safety systems, such as seatbelt pretensioners.

Q: Will this module need to be programmed?
A: Yes, in most cases, the airbag control module will need to be programmed to your specific vehicle. This ensures it communicates correctly with the other systems in your car.

Q: What happens if I install the module myself and the airbag light is still on?
A: If the airbag light remains on after installation, it could indicate a problem with the installation, the module itself, or another part of the airbag system. You'll need to have the system diagnosed by a professional.

Q: Is it safe to drive with the airbag light on?
A: Driving with the airbag light on is not recommended. It means the airbag system may not function properly in an accident. It's best to have the system inspected and repaired as soon as possible.

Q: How do I know if this module is compatible with my vehicle?
A: Verify the part is compatible with your vehicle's year, make, and model.

Q: What does "OEM" mean?
A: OEM stands for Original Equipment Manufacturer. It means the part was originally made by the company that made your car.

OEM Part Numbers:

• GM: 13510817, 13518660, 13518680, 13523858, 13547

Fits Years: 2016 2017 2018 2019 2020 2021 2022 2023 2024