OEM Fuel Pump Control Module for 2016-2024 BMW & Toyota

When buying a fuel pump control module, look for these things:

• Correct Part: Make sure the part is designed for your specific year, make, and model.
• Warranty: Check if the part comes with a warranty. A warranty protects you if the part fails soon after installation.
• Condition: Decide if you want a used OEM or a new aftermarket part.
• Seller Reputation: Buy from a reputable seller with good reviews.

Quality indicators for available options:

• Used OEM: Look for parts that have been tested and inspected to ensure they are working properly.
• New Aftermarket: Choose parts from well-known brands that have a good reputation for quality.

What's typically included with the part:

• The fuel pump control module itself.
• Sometimes, mounting hardware may be included, but often you'll reuse your existing hardware.

The difficulty level of installing a fuel pump control module is generally considered moderate. Estimated time is usually 30 minutes to 1 hour.

Special tools needed:

• Socket set
• Screwdrivers
• Diagnostic scan tool (to clear codes after installation)

Critical steps and tips:

1. Disconnect the negative battery cable before starting.
2. Locate the fuel pump control module (usually near the fuel tank).
3. Disconnect the electrical connectors from the module.
4. Remove the mounting hardware and remove the old module.
5. Install the new module and secure it with the mounting hardware.
6. Reconnect the electrical connectors.
7. Reconnect the negative battery cable.
8. Use a diagnostic scan tool to clear any trouble codes.

DIY is possible for mechanically inclined individuals. However, professional installation is recommended if you are not comfortable working on your car's fuel system.

Here's a comparison of used OEM and new aftermarket options:

• Used OEM: These are genuine factory parts that were originally installed in the vehicle. They offer excellent value because they are tested, inspected, and available at a lower price than new parts.
• New Aftermarket: These are brand new parts made by third-party manufacturers. They are designed to meet or exceed the original equipment specifications.

Both options can be good choices, depending on your budget and preferences.

Parts commonly replaced or checked at the same time:

• Fuel Pump: If the fuel pump is old or failing, it can put extra strain on the fuel pump control module.
• Fuel Filter: A clogged fuel filter can restrict fuel flow and cause the fuel pump to work harder.
• Fuel Pump Relay: A faulty fuel pump relay can prevent the fuel pump from working properly.

Replacing related parts can prevent repeat failures by ensuring that the entire fuel system is working efficiently.

A fuel pump control module typically lasts 75,000 to 150,000 miles.

Factors that affect longevity:

• Driving Conditions: Frequent short trips and stop-and-go traffic can shorten the lifespan of the module.
• Fuel Quality: Using low-quality fuel can damage the fuel pump and put extra strain on the module.
• Maintenance: Regular maintenance, such as replacing the fuel filter, can help extend the lifespan of the module.
• Electrical System Health: A healthy electrical system is crucial for the module to function properly.

• Used OEM: $50 - $150
• New Aftermarket: $100 - $250
• Labor cost (if applicable): $50 - $150

Total job cost estimates:

• DIY with Used OEM: $50 - $150
• DIY with New Aftermarket: $100 - $250
• Professional Installation with Used OEM: $100 - $300
• Professional Installation with New Aftermarket: $150 - $400

Some vehicles may experience specific issues related to the fuel pump control module, such as:

• Premature failure due to poor heat dissipation.
• Software glitches that can cause the module to malfunction.
• Sensitivity to voltage fluctuations.

Check for any Technical Service Bulletins (TSBs) or common complaints related to your specific vehicle model.

To confirm proper operation after installing the new fuel pump control module:

• Start the engine and let it idle for a few minutes.
• Check for any unusual noises from the fuel pump.
• Monitor the engine's performance while driving.
• Use a diagnostic scan tool to check for any new trouble codes.

Listen for:

• A smooth and consistent engine idle.
• Normal acceleration and engine power.
• No stalling or hesitation.

Q: How do I know if my fuel pump control module is bad?
A: Common signs include engine stalling, difficulty starting, reduced engine power, and a check engine light.

Q: Can I drive my car with a bad fuel pump control module?
A: It's not recommended. A failing module can cause the engine to stall unexpectedly, which can be dangerous.

Q: Where is the fuel pump control module located?
A: It's usually located near the fuel tank, often under the rear seat or in the trunk.

Q: Do I need to program the new fuel pump control module?
A: Some vehicles may require programming after installation. Check your vehicle's repair manual or consult a professional mechanic.

Q: What happens if I don't replace my fuel pump control module?
A: If you don't replace a faulty module, your car may not start or run properly, and you could experience engine stalling and reduced fuel efficiency.

OEM Part Numbers:

• BMW: 16147439743, 16147461741, 1614748245, 16147482455, 16148488591, 16149452468, 1614948503, 16149485034

Fits Years: 2016 2017 2018 2019 2020 2021 2022 2023 2024