OEM Seat Control Module for 2007-2013 BMW

When buying a seat control module, here's what to keep in mind:

• Make sure the module is compatible with your BMW's year and model.
• Check the part number to ensure it matches the one you're replacing.
• Inspect the module for any signs of damage, such as cracks or corrosion.
• If buying a used module, ask if it has been tested and is guaranteed to work.

Quality indicators for seat control modules include:

• Clean connectors with no corrosion.
• A housing that is free from cracks or damage.
• Proper labeling with the correct part number.
• If used, confirmation that it was tested and functioning properly before removal.

Typically, you'll just get the seat control module itself. You might need to reuse your existing mounting hardware.

Replacing a seat control module is generally a medium-difficulty job. It might take about 1-2 hours.

You might need these tools:

• Socket set
• Screwdrivers
• Pliers
• Scan tool (to clear any fault codes after installation)

Here are the basic steps:

1. Disconnect the negative battery cable.
2. Remove the seat from the vehicle.
3. Locate the seat control module under the seat.
4. Disconnect the electrical connectors from the module.
5. Remove the old module and install the new one.
6. Reconnect the electrical connectors.
7. Reinstall the seat.
8. Reconnect the negative battery cable.
9. Use a scan tool to clear any fault codes.

Critical tips:

• Be careful when disconnecting the electrical connectors to avoid damaging them.
• Make sure the new module is securely mounted.
• Double-check all connections before reconnecting the battery.

Whether you should DIY or hire a professional depends on your comfort level. If you're comfortable working on cars and have the necessary tools, you can probably do it yourself. However, if you're not sure, it's best to have a professional install it.

You have a couple of options when buying a seat control module: used OEM and new aftermarket.

• Used OEM: These are genuine factory parts that were originally installed in BMWs. They're tested and inspected to ensure they're working properly. The big advantage is that they're usually much cheaper than new parts.

• New Aftermarket: These are brand-new parts made by third-party manufacturers. They're designed to meet or exceed the specifications of the original parts.

Here's a quick comparison:

When replacing the seat control module, it's a good idea to check a few other parts as well:

• Seat motors: If the seat isn't moving properly, the motors could be failing.
• Wiring harness: Check the wiring harness for any signs of damage or corrosion.
• Fuses: Make sure the fuses related to the seat are in good condition.

Replacing these parts at the same time can help prevent repeat failures. For example, a faulty seat motor can put extra strain on the seat control module, causing it to fail prematurely.

A seat control module typically lasts for 8-12 years or more.

Factors that can affect its lifespan include:

• Exposure to moisture or extreme temperatures.
• Electrical problems in the vehicle.
• Frequent use of the seat adjustment functions.
• Accidents or impacts that damage the seat.

Here's a general idea of the price ranges you can expect:

• Used OEM: $50 - $200
• New Aftermarket: $100 - $300

Labor costs to install a seat control module can range from $100 to $300, depending on the shop and the complexity of the job.

Total job cost estimates:

• Used OEM + Labor: $150 - $500
• New Aftermarket + Labor: $200 - $600

Some BMWs from 2006-2016 have known issues with their seat control systems. For example, some models are prone to water leaks that can damage the module. There may be Technical Service Bulletins (TSBs) related to seat control module problems. Check with a BMW dealer or online resources for more information. Common complaints include intermittent seat movement and memory seat malfunctions.

After installing the new seat control module, it's important to verify that it's working correctly.

• Test all seat functions to make sure the seat moves in all directions.
• Check the seat memory function to see if it's working properly.
• Listen for any unusual noises from under the seat.
• Use a scan tool to clear any fault codes and make sure they don't return.

If everything is working as it should, you're good to go.

Q: How do I know if my seat control module is bad?
A: Common signs include the seat not moving, moving erratically, or the memory function not working.

Q: Can I replace the seat control module myself?
A: If you're comfortable working on cars and have the right tools, you can probably do it yourself. Otherwise, it's best to have a professional install it.

Q: Will a new seat control module need to be programmed?
A: In some cases, yes. Some modules require programming to match your vehicle's specific settings. Check with the seller or a BMW dealer to confirm.

Q: What if the new module doesn't fix the problem?
A: There could be other issues, such as a faulty seat motor or a problem with the wiring harness. Further diagnosis may be needed.

Q: Are used OEM seat control modules reliable?
A: Yes, used OEM modules can be a good option. They're genuine factory parts that have been tested to ensure they're working properly.

OEM Part Numbers:

• Other: 61359134662, 61359134667, 61359148265, 61359196936

Fits Years: 2007 2008 2009 2010 2011 2012 2013