Chevrolet C10 Suburban Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

with Empty Case with GM 8.5 Axle with 2.73 or Higher Rear Axle Ratio with 28 Spline Teeth with 30 Spline Teeth with Open Differential

Works w/Most Differentials GM 8.5 in.; Carrier shim driver kit

8.5 in. 10 Bolt; Standard; 28/30 Spline; 2.73 And Up Carrier Break GM 8.5 in.; Bare Standard Open Carrier Case; Fits 28 or 30 Spline internals; 2.73 And Up Carrier Break; 1.627 in. Bearing Journal Diameter~GM 8.5 in.; Standard; 28/30 Spline; 2.73 And Up Carrier Break

For Use w/Dana Spicer 60 Dana 60

Standard; Uses Larger Bearings; For Use w/GM 8.5 in. Differential GM 8.5 in.; Bare Standard Open Carrier Case; Fits 28 or 30 Spline internals; 2.73 And Up Carrier Break; 1.784 in. Bearing Journal Diameter; Heavy Duty Large Hub Design~GM 8.5 in.; Standard; Uses Larger Bearings; For Use w/GM 8.5 in. Differential

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Standard; Open; 4.10 And Down Carrier Break

Dana 60

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

8.6 in./8.5 in./8.2 in. 10 Bolt; Dura Grip Case; 2.73 And Up GM 8.5 in.; Dura Grip Case; 2.73 And Up

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 35 Splines with Dana 60 Axle with Spider Gears

10 Bolt Differential Cover 2.76 Rear Axle Ratio and Greater 28 Spline 8.5 In. Ring Gear w/RPO Code G80 (Positraction/Limited Slip)

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 32 Splines with Dana 60 Axle

with Empty Case with GM 8.25 IFS Axle 12 Bolt with 3.73 or Higher Rear Axle Ratio with 30 Spline Teeth with Open Differential

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle