Step 1: Locate and remove the two 10mm bolts that are on the underside of the front end.
These two bolts hold the fog light in place. You may need penetrating oil, as these bolts have been exposed to the elements while driving.
NOTE: If the studs that secure the fog light to the vehicle "pull out" of the assembly during remove, you may need to remove the studs from the new assembly, use penetrating oil and vise grips to remove the old studs from the vehicle, and reattach using the new studs accordingly.
Step 2: Remove the fog light assembly.
Step 3: Unplug the wiring harness.
Step 4: Connect the wiring harness to the new fog light assembly.
Step 5: Insert the new fog light into the opening and bolt it into place.
While we are more than happy to create these installation guides for your benefit, we cannot maintain any liability regarding the part, or the driving experience, once the part has been replaced/installed. We always guarantee the quality of the parts we provide, but the installation liability rests solely on the installer.
And, though we are always here to answer your questions, please note that our technicians created these guides for your convenience, and cannot provide assistance beyond this guide.
If you're looking for a good deal on the parts mentioned in this instructional guide, be sure to check these out: